Go Back  Bike Forums > Bike Forums > Road Cycling
Reload this Page >

Just a thought: A PVC Frameset

Notices
Road Cycling “It is by riding a bicycle that you learn the contours of a country best, since you have to sweat up the hills and coast down them. Thus you remember them as they actually are, while in a motor car only a high hill impresses you, and you have no such accurate remembrance of country you have driven through as you gain by riding a bicycle.” -- Ernest Hemingway

Just a thought: A PVC Frameset

Old 09-17-07, 07:04 PM
  #1  
CERVEL-LIZED!
Thread Starter
 
BHBiker's Avatar
 
Join Date: Dec 2006
Posts: 1,696
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Just a thought: A PVC Frameset

Just wondering if a PVC-made frameset would be feasible ha ha ha....some carbon have that sound not unlike a hollow PVC,..I wonder if a stronger PVC type material can be made into a lightweight frame??? It maybe plastic but plastics can also be made tough! Any enginer/experts can share their thoughts?
BHBiker is offline  
Old 09-17-07, 07:12 PM
  #2  
1/2 man,1/2 bear,1/2 pig
 
ManBearPig's Avatar
 
Join Date: May 2004
Location: .
Posts: 1,122

Bikes: .

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Your question raises another question: Why?
__________________
...
ManBearPig is offline  
Old 09-17-07, 07:16 PM
  #3  
CERVEL-LIZED!
Thread Starter
 
BHBiker's Avatar
 
Join Date: Dec 2006
Posts: 1,696
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
^ actually I just thought of it. There was an advert just a few minutes ago about a new, tougher, UV proof PVC drain on TV and the thought just sprang in my mind. Its cheaper than carbon and I presume unlike aluminum my absorb more vibration. Hell its weight is anorexicly desirable ha ha ha ha...
BHBiker is offline  
Old 09-17-07, 07:17 PM
  #4  
Senior Member
 
Join Date: Apr 2005
Location: Northern California
Posts: 10,879
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 104 Post(s)
Likes: 0
Liked 5 Times in 5 Posts
Just mould your PVC pipes with carbon fiber reinforcing.
johnny99 is offline  
Old 09-17-07, 07:17 PM
  #5  
San Diego, California
 
Dynamic's Avatar
 
Join Date: Feb 2007
Posts: 811
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time in 1 Post
well find the right connector pieces and id love to do it
Dynamic is offline  
Old 09-17-07, 07:18 PM
  #6  
Senior Member
 
maddyfish's Avatar
 
Join Date: Jul 2006
Location: Ky. and FL.
Posts: 3,944

Bikes: KHS steel SS

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I'll bet per foot, of the thickness required for the needed strength, that it is heavier than aluminum.
maddyfish is offline  
Old 09-17-07, 07:24 PM
  #7  
Mitcholo
 
CrimsonKarter21's Avatar
 
Join Date: Aug 2006
Location: Oost Vlaanderen in mind, Cleveland in body
Posts: 8,850

Bikes: 2010 Mitcholo w/ Sram Force/Red

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I think Huffy and Ross already did it. That and carbon steel gas-pipes.
CrimsonKarter21 is offline  
Old 09-17-07, 07:24 PM
  #8  
iab
Senior Member
 
iab's Avatar
 
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,156
Mentioned: 200 Post(s)
Tagged: 0 Thread(s)
Quoted: 2993 Post(s)
Liked 3,711 Times in 1,393 Posts
I give you the Itera, cheap Swedish plastic.

iab is offline  
Old 09-17-07, 07:29 PM
  #9  
Burning Matches.
 
ElJamoquio's Avatar
 
Join Date: Jan 2006
Location: San Jose, CA
Posts: 9,714
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 4076 Post(s)
Liked 1,002 Times in 676 Posts
Originally Posted by BHBiker
Just wondering if a PVC-made frameset would be feasible ha ha ha....some carbon have that sound not unlike a hollow PVC,..I wonder if a stronger PVC type material can be made into a lightweight frame??? It maybe plastic but plastics can also be made tough! Any enginer/experts can share their thoughts?
I'm not an enginer, but...

No.

Just NO.
__________________
ElJamoquio didn't hate the world, per se; he was just constantly disappointed by humanity.
ElJamoquio is offline  
Old 09-17-07, 07:32 PM
  #10  
Banned.
 
Join Date: Sep 2007
Location: Hammerland
Posts: 1,765
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Regular PVC is pretty brittle.
CharlieWoo is offline  
Old 09-17-07, 07:41 PM
  #11  
Senior Member
 
Join Date: Feb 2006
Posts: 1,564
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time in 1 Post
it's been done years ago...a few times.

it makes a fine bike. has it's own characteristics, none of them inspiring confidence.
edzo is offline  
Old 09-17-07, 07:52 PM
  #12  
Senior Member
 
Join Date: Apr 2005
Location: Northern California
Posts: 10,879
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 104 Post(s)
Likes: 0
Liked 5 Times in 5 Posts
Originally Posted by Dynamic
well find the right connector pieces and id love to do it
Can't you use standard steel lugs, or is that cheating?
johnny99 is offline  
Old 09-17-07, 08:10 PM
  #13  
1/2 man,1/2 bear,1/2 pig
 
ManBearPig's Avatar
 
Join Date: May 2004
Location: .
Posts: 1,122

Bikes: .

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Towlie
Your question raises another question: Why?
It seems like it is kinda going about design in reverse. It makes sense to identify a material with superior mechanical properties (titanium, certain grades of steel and aluminum, composites, beryllium, etc.), and then determine how best to utilize it in a frame to harness its properties. But PVC is just kinda flimsy and has no particularly desirable properties, so it wouldn't make much sense from a design perspective to "make it work." Raw, I would guess based on practical experience that it would make a usable but not very good frame, either being too heavy to obtain the desired strength or being too flimsy to obtain the desired weight. The way you could make it stronger is to reinforce it with fibers or particles, as in the case of carbon-fiber (which is carbon-reinforced plastic) or metal-matrix composite, but that has already been done with better matrix materials than PVC.
__________________
...
ManBearPig is offline  
Old 09-17-07, 08:17 PM
  #14  
Cat3.*....Cat2
 
asmallsol's Avatar
 
Join Date: May 2006
Location: Livonia, MI
Posts: 2,171

Bikes: A lot.

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I'm a materials enginEEring student (senior so I have a little credibility). Carbon fiber parts are a fiber reinforced plastic. The typical plastic being used is epoxy. Carbon itself is extremely stiff (modulus of elasticity is about 700 GPa compared to Reynolds 531 which is like AISI 4130 steel has a modulus of 205 GPa {when normalized to 870°C and air cooled.}) and an extremly low density (1.78-2.15 in fiber form, compared to 7.9 g/cm^3 for a high strength steel.

Now the problem. Carbon itself is EXTREMELY brittle. Think of pencil lead. Same stuff really. However, if you make the fibers small enough, then there isn't a large enough internal bending moment to fracture the fiber. Its the same principle for fiber glass (truly just normal silicon glass that is made extremely thin.) In essence, you can not fracture these fibers by bending them, however, you can bend them easily so thats not the best for supporting human life with. However, in the direction of the fiber length, it can support a lot of force. In a perpendicular weave orientation (typical looking checkerboard style) you can support a lot of force in both directions and when the force is applied at an angle the vector is resolved to each direction in the fiber.

Now there is epoxy. It is not really stiff, nor light. However, pre set, it flows alright at normal temperatures (I work with it a lot with the only protection being rubber gloves because the stuff is kinda messy) so it can impregnate the carbon weave relatively easily by using vacuums. Once set, it holds the carbon weave in place. In reality, this is the major role the matrix plays. Using more only decrease the specific strength of the carbon fiber composite (makes heavier without increasing the strength) Lately companies (easton is a big leader in this) have been using carbon nano tubes in the matrix to displace some of the epoxy (use less epoxy) because the CNT's are less dense then the matrix they displace.

In a composite, many times the strength of one material is reduced and weight increased, (carbon) while the flexibility of the other is reduced (epoxy) to create a material with a compromise in strength and weight. Looking in my old Callister intro to MSE book, there is a great figure that shows this however, I can't find the same figure online (figure 15.9 for any one who's ever taken intro to MSE and used this book which almost every intro MSE class does) The result is a material who's specific strength is multiple time higher then steel.

Now why not PVC. PVC alone is weak, brittle, worthless for structural purposes. Now could it be used as the matrix of a composite. Yes, and strength could be increased. However PVC is a thermoplastic that has a processing temp around 400*F/200*C. Heating a liquid to this high is expensive, and makes it much more difficult to work with. Epoxy is a product of mixing two liquids resin and hardener together, and within about 8 hours (less if baked) become a solid. This makes it much easier to work with. Thats not to say carbon fiber and thermoplastics do not meet. I do materials testing for an auto-company. One of the things I see a lot is impregnating tiny (as in you cant see without an SEM microscope) carbon fibers into plastics to increase their electrical conductivity.

And before anyone jumps on me for saying blah blah blah, I am simply giving a very brief overview of composites. The science behind them is pretty interesting.
asmallsol is offline  
Old 09-17-07, 08:24 PM
  #15  
Senior Member
 
texascyclist's Avatar
 
Join Date: May 2005
Posts: 439
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Originally Posted by BHBiker
Just wondering if a PVC-made frameset would be feasible ha ha ha....some carbon have that sound not unlike a hollow PVC,..I wonder if a stronger PVC type material can be made into a lightweight frame??? It maybe plastic but plastics can also be made tough! Any enginer/experts can share their thoughts?
Sorry, but creep, tensil strength, and stiffness all vote no.
texascyclist is offline  
Old 09-17-07, 08:27 PM
  #16  
Cat3.*....Cat2
 
asmallsol's Avatar
 
Join Date: May 2006
Location: Livonia, MI
Posts: 2,171

Bikes: A lot.

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Towlie
The way you could make it stronger is to reinforce it with fibers or particles, as in the case of carbon-fiber (which is carbon-reinforced plastic) or metal-matrix composite, but that has already been done with better matrix materials than PVC.
Metal matrix composites are composites that use metal as the matrix, not polymers. Examples of this would be putting something like silicon carbides into a liquid phase metal to increase the fracture toughness, stiffness, ect.
asmallsol is offline  
Old 09-17-07, 08:27 PM
  #17  
Senior Member
 
StrangeWill's Avatar
 
Join Date: Jun 2007
Location: Fallbrook, CA.
Posts: 1,109
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I think you'd have a problem with vibration too, PVC can be made stronger, but it's still really flexible
StrangeWill is offline  
Old 09-17-07, 08:31 PM
  #18  
Senior Member
 
ken cummings's Avatar
 
Join Date: Dec 2005
Location: northern California
Posts: 5,603

Bikes: Bruce Gordon BLT, Cannondale parts bike, Ecodyne recumbent trike, Counterpoint Opus 2, miyata 1000

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I've known a few HPV builders who made rough drafts with PVC. Mostly to get the geometry right and have a physical form to improve on. They didn't ride them. Joints would be made much like Calfee's bamboo bikes.
ken cummings is offline  
Old 09-18-07, 12:38 AM
  #19  
The Dark Jedi
 
anfieldmx5's Avatar
 
Join Date: Jun 2006
Location: Huntington Beach, CA
Posts: 235
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by asmallsol
I'm a materials enginEEring student (senior so I have a little credibility). Carbon fiber parts are a fiber reinforced plastic. The typical plastic being used is epoxy. Carbon itself is extremely stiff (modulus of elasticity is about 700 GPa compared to Reynolds 531 which is like AISI 4130 steel has a modulus of 205 GPa {when normalized to 870°C and air cooled.}) and an extremly low density (1.78-2.15 in fiber form, compared to 7.9 g/cm^3 for a high strength steel.

Now the problem. Carbon itself is EXTREMELY brittle. Think of pencil lead. Same stuff really. However, if you make the fibers small enough, then there isn't a large enough internal bending moment to fracture the fiber. Its the same principle for fiber glass (truly just normal silicon glass that is made extremely thin.) In essence, you can not fracture these fibers by bending them, however, you can bend them easily so thats not the best for supporting human life with. However, in the direction of the fiber length, it can support a lot of force. In a perpendicular weave orientation (typical looking checkerboard style) you can support a lot of force in both directions and when the force is applied at an angle the vector is resolved to each direction in the fiber.

Now there is epoxy. It is not really stiff, nor light. However, pre set, it flows alright at normal temperatures (I work with it a lot with the only protection being rubber gloves because the stuff is kinda messy) so it can impregnate the carbon weave relatively easily by using vacuums. Once set, it holds the carbon weave in place. In reality, this is the major role the matrix plays. Using more only decrease the specific strength of the carbon fiber composite (makes heavier without increasing the strength) Lately companies (easton is a big leader in this) have been using carbon nano tubes in the matrix to displace some of the epoxy (use less epoxy) because the CNT's are less dense then the matrix they displace.

In a composite, many times the strength of one material is reduced and weight increased, (carbon) while the flexibility of the other is reduced (epoxy) to create a material with a compromise in strength and weight. Looking in my old Callister intro to MSE book, there is a great figure that shows this however, I can't find the same figure online (figure 15.9 for any one who's ever taken intro to MSE and used this book which almost every intro MSE class does) The result is a material who's specific strength is multiple time higher then steel.

Now why not PVC. PVC alone is weak, brittle, worthless for structural purposes. Now could it be used as the matrix of a composite. Yes, and strength could be increased. However PVC is a thermoplastic that has a processing temp around 400*F/200*C. Heating a liquid to this high is expensive, and makes it much more difficult to work with. Epoxy is a product of mixing two liquids resin and hardener together, and within about 8 hours (less if baked) become a solid. This makes it much easier to work with. Thats not to say carbon fiber and thermoplastics do not meet. I do materials testing for an auto-company. One of the things I see a lot is impregnating tiny (as in you cant see without an SEM microscope) carbon fibers into plastics to increase their electrical conductivity.

And before anyone jumps on me for saying blah blah blah, I am simply giving a very brief overview of composites. The science behind them is pretty interesting.
........er... what? pass me the bong dude.....
anfieldmx5 is offline  
Old 09-18-07, 12:45 AM
  #20  
newbie rider
 
Join Date: Aug 2007
Location: Houston, TX
Posts: 481
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by asmallsol
WHOLE BUNCHA INFO
could've just said pvc is brittle by itself dude
mista_chewey is offline  
Old 09-18-07, 04:58 AM
  #21  
Senior Member
 
blackjack51's Avatar
 
Join Date: Aug 2006
Posts: 94
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by asmallsol
I'm a materials enginEEring student (senior so I have a little credibility)........... Carbon itself is extremely stiff (modulus of elasticity is about 700 GPa compared to Reynolds 531 which is like AISI 4130 steel has a modulus of 205 GPa {when normalized to 870°C and air cooled.})

Hmmmm..... Where abouts are you studying?

Just reminding you that all structural steels have a modulus of elasticity of 205GPa regardless of whether it's normalised steel, annealed steel, quenched steel, Mild Steel, Carbon Steel, CrMo, Reynolds 531, Columbus Spirit etc etc
blackjack51 is offline  
Old 09-18-07, 06:28 AM
  #22  
Making a kilometer blurry
 
waterrockets's Avatar
 
Join Date: May 2006
Location: Austin (near TX)
Posts: 26,170

Bikes: rkwaki's porn collection

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 37 Post(s)
Liked 91 Times in 38 Posts
I don't think the purple primer would be very OCP unless you masked and/or stenciled it.
waterrockets is offline  
Old 09-18-07, 07:35 AM
  #23  
1/2 man,1/2 bear,1/2 pig
 
ManBearPig's Avatar
 
Join Date: May 2004
Location: .
Posts: 1,122

Bikes: .

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by asmallsol
Metal matrix composites are composites that use metal as the matrix, not polymers. Examples of this would be putting something like silicon carbides into a liquid phase metal to increase the fracture toughness, stiffness, ect.
When I wrote "that" I was referring to composites generally. My point was "that" (i.e. composites) have been done with better matrix materials than PVC -- namely, resins/plastics and metals. It would make no sense to try to make PVC work by reinforcing it when better matrix materials have already been developed.

(I also have a BSME '97 with a materials-science specialty and worked quite a bit with composites in school and in engineering)
__________________
...
ManBearPig is offline  
Old 09-18-07, 08:29 AM
  #24  
Should be riding
 
Bike Lover's Avatar
 
Join Date: Mar 2006
Location: S.E. Michigan
Posts: 1,602

Bikes: C-dale- moutain, Pedal Force RS- Campy Record, Quiring Ti XTR, Red line Monocog, S E F@r

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by StrangeWill
I think you'd have a problem with vibration too, PVC can be made stronger, but it's still really flexible
Well, according to the stiffness discussions, this is a benefit. All the energy being used to flex the frame will get put back into forward motion or some such thing...
Bike Lover is offline  
Old 09-18-07, 08:42 AM
  #25  
DocRay
Guest
 
Posts: n/a
Mentioned: Post(s)
Tagged: Thread(s)
Quoted: Post(s)
you can make a bike stand from PVC...

https://www.instructables.com/id/EB6KT4AYQHEYVZDYSH/

 

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.