First ride on new bike...nice
#1
West Michigan
Thread Starter
Join Date: Jul 2009
Location: West Michigan
Posts: 133
Bikes: Jamis, Schwinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
First ride on new bike...nice
Jamis Ventura Race, Shimano M520 Pedals, Lake brand shoes.
I do not have a computer on this bike yet so I took it up to one of our "Tracks to Trails" trails where they turned an old railroad line into a bike path. Nice and flat with a slight grade at the end that is about three to four miles up. I wanted to start at this track because it is 15 miles from one town to the next. Surprised the heck out of me because I made it to the next town in 45 minutes. On my old non-road bike it took me almost an hour. I filled up my water bottle, stretched my legs and rode back with the wind gusting up to 15 MPH in my face. Needless to say I was slower on the way back to due fatigue, wind, and general soreness.
Observations: Need to adjust cleats, my right foot naturally toes out and I need to accommodate for it. Padded shorts may be in my future, my back side is a little sore. And my right hand kept falling asleep, although I knew it would happen due to previous carpal tunnel surgeries and I just kept changing my grip the best I could. All in all I really had a good time. I was attacked by an Assassin/Robber Fly but I did get to see a doe and fawn and a couple woodchucks too.
I do not have a computer on this bike yet so I took it up to one of our "Tracks to Trails" trails where they turned an old railroad line into a bike path. Nice and flat with a slight grade at the end that is about three to four miles up. I wanted to start at this track because it is 15 miles from one town to the next. Surprised the heck out of me because I made it to the next town in 45 minutes. On my old non-road bike it took me almost an hour. I filled up my water bottle, stretched my legs and rode back with the wind gusting up to 15 MPH in my face. Needless to say I was slower on the way back to due fatigue, wind, and general soreness.
Observations: Need to adjust cleats, my right foot naturally toes out and I need to accommodate for it. Padded shorts may be in my future, my back side is a little sore. And my right hand kept falling asleep, although I knew it would happen due to previous carpal tunnel surgeries and I just kept changing my grip the best I could. All in all I really had a good time. I was attacked by an Assassin/Robber Fly but I did get to see a doe and fawn and a couple woodchucks too.
#3
West Michigan
Thread Starter
Join Date: Jul 2009
Location: West Michigan
Posts: 133
Bikes: Jamis, Schwinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Pics of the ride? Aww man, the only camera I have is a Pentax K100D DSLR and didn't wanna lug it around. Basically it is a bike path that used to be a train track that runs through farm country. So imaging corn, corn, creeks, fields, and corn. I need to get a bike bag but the LBS doesn't have frame bags only seat bags. Going to search the forum and net to see the advantages/disadvantages of frame and seat bags. Oh the ride happened, my right legs says so, sore. Had knee surgery a few years ago and like I said I think my cleat position was too straight, I toe out naturally on the right foot.
#4
Senior Member
Join Date: Jul 2009
Location: Kitchener, Ontario, Canada
Posts: 172
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
No, the bike~ lol
I am fairly new to these forums, but it was one of the things I noticed right away. It is a sort of rule of thumb to post your bike~
(here is hoping I can do the same very very shortly)
I am fairly new to these forums, but it was one of the things I noticed right away. It is a sort of rule of thumb to post your bike~
(here is hoping I can do the same very very shortly)
#6
West Michigan
Thread Starter
Join Date: Jul 2009
Location: West Michigan
Posts: 133
Bikes: Jamis, Schwinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#8
West Michigan
Thread Starter
Join Date: Jul 2009
Location: West Michigan
Posts: 133
Bikes: Jamis, Schwinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The bike
Would like to ditch the metal water bottle cages and get something lighter.
#10
West Michigan
Thread Starter
Join Date: Jul 2009
Location: West Michigan
Posts: 133
Bikes: Jamis, Schwinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I think it was a robber fly, been bit by one before. There are tons of them out here right now. I did not see it but I felt something land on me and then WOW I was bitten. I brushed it off quickly but it stung for several hours after that. The grasshoppers were playing kamikaze too, got hit by a few dozen of them.
#11
West Michigan
Thread Starter
Join Date: Jul 2009
Location: West Michigan
Posts: 133
Bikes: Jamis, Schwinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#12
¯\_(ツ)_/¯
Join Date: Jun 2008
Location: Redwood City, CA
Posts: 10,978
Bikes: aggressive agreement is what I ride.
Mentioned: 109 Post(s)
Tagged: 0 Thread(s)
Quoted: 967 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
Your wrist/hand might be falling asleep because your saddle is tilted such that you support some of your weight with your arms just to keep your ass on it.
Upgrading bottle cages to make the bike look better is cool if you want to, but the weight savings will be minimal. Carbon cages may hold the bottle better over rough roads (I think my Arundel ones do this), but the weight savings is seriously minimal. Not something you'd be able to feel lifting the bike, e.g.
Edit, yes you can remove spacers. Keep them on top of the bar until you're SURE you want to cut the steerer tube.
Also, I'm jealous that we don't have any nice straight flat trails to TT on.
Upgrading bottle cages to make the bike look better is cool if you want to, but the weight savings will be minimal. Carbon cages may hold the bottle better over rough roads (I think my Arundel ones do this), but the weight savings is seriously minimal. Not something you'd be able to feel lifting the bike, e.g.
Edit, yes you can remove spacers. Keep them on top of the bar until you're SURE you want to cut the steerer tube.
Also, I'm jealous that we don't have any nice straight flat trails to TT on.
#13
West Michigan
Thread Starter
Join Date: Jul 2009
Location: West Michigan
Posts: 133
Bikes: Jamis, Schwinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Your wrist/hand might be falling asleep because your saddle is tilted such that you support some of your weight with your arms just to keep your ass on it.
Upgrading bottle cages to make the bike look better is cool if you want to, but the weight savings will be minimal. Carbon cages may hold the bottle better over rough roads (I think my Arundel ones do this), but the weight savings is seriously minimal. Not something you'd be able to feel lifting the bike, e.g.
Edit, yes you can remove spacers. Keep them on top of the bar until you're SURE you want to cut the steerer tube.
Also, I'm jealous that we don't have any nice straight flat trails to TT on.
Upgrading bottle cages to make the bike look better is cool if you want to, but the weight savings will be minimal. Carbon cages may hold the bottle better over rough roads (I think my Arundel ones do this), but the weight savings is seriously minimal. Not something you'd be able to feel lifting the bike, e.g.
Edit, yes you can remove spacers. Keep them on top of the bar until you're SURE you want to cut the steerer tube.
Also, I'm jealous that we don't have any nice straight flat trails to TT on.
If the bottle cages don't really help in the weight department then I could save my money and use them for now.
I may remove one of the spacers later, after I search how to, but I think I need to ride the way it is now and continue with my weight training to condition myself.
That particular trail is about 65 miles round trip, all paved.
Thank you for the reply.
Last edited by chains1240; 08-05-09 at 10:28 AM. Reason: added content, found answer
#14
Senior Member
Hot bike!
Can't seem to figure it out, what group is on it?
Besides, swapping water cages for lighter ones hardly reduces the total weight.
Can't seem to figure it out, what group is on it?
Besides, swapping water cages for lighter ones hardly reduces the total weight.
#15
Senior Member
Join Date: Jul 2009
Location: Kitchener, Ontario, Canada
Posts: 172
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
https://www.jimlangley.net/crank/bikefit.html
Excellent find!!! I hope to be reading that as well tonight fitting my bike
Excellent find!!! I hope to be reading that as well tonight fitting my bike
#16
West Michigan
Thread Starter
Join Date: Jul 2009
Location: West Michigan
Posts: 133
Bikes: Jamis, Schwinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Derailleurs Shimano 105 rear & 105 front, 31.8mm clamp
https://www.jamisbikes.com/usa/thebik...race_spec.html
The site says 20 speed and I may be new to this but the bike shifter clearly says Tiagra 9 speed with 2 rings on the front. Making it a 18 speed?
#18
Senior Member
Join Date: Jun 2008
Posts: 857
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Remember when you're buying different bottle cages: water still weighs the same. Lighter cages don't do much when you carry 32oz water bottles.
#19
West Michigan
Thread Starter
Join Date: Jul 2009
Location: West Michigan
Posts: 133
Bikes: Jamis, Schwinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#20
West Michigan
Thread Starter
Join Date: Jul 2009
Location: West Michigan
Posts: 133
Bikes: Jamis, Schwinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Good thought. I ditched the idea of different water bottle cages. My wife bought me a 24oz polar bottle, Screaming Yellow Pearl Izumi Jersey, and a pair of LG Liberty Shorts, and an under the seat bag for my birthday. Better use of money than replacing water bottle cages I already have.
#21
Senior Member
Anyway, I think they counted wrong. My best guess is they were slightly distracted while checking the cassette and counted 1 more gear on that.
#22
Senior Member
Join Date: Sep 2007
Location: NW
Posts: 375
Bikes: '86 Trek 770 Pro Series, 80's Torelli Corsa Strada
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Shiftlevers Shimano 105 Dual Control STI , 20-speed
Derailleurs Shimano 105 rear & 105 front, 31.8mm clamp
https://www.jamisbikes.com/usa/thebik...race_spec.html
The site says 20 speed and I may be new to this but the bike shifter clearly says Tiagra 9 speed with 2 rings on the front. Making it a 18 speed?
Derailleurs Shimano 105 rear & 105 front, 31.8mm clamp
https://www.jamisbikes.com/usa/thebik...race_spec.html
The site says 20 speed and I may be new to this but the bike shifter clearly says Tiagra 9 speed with 2 rings on the front. Making it a 18 speed?
#23
West Michigan
Thread Starter
Join Date: Jul 2009
Location: West Michigan
Posts: 133
Bikes: Jamis, Schwinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#24
Number One
Join Date: Apr 2009
Location: Danville, CA
Posts: 536
Bikes: Scott CR1 Elite
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Did anyone notice the odd shifter cable routing?.. I've never seen it done over the handlebars, and imo it seems rather intrusive.
#25
West Michigan
Thread Starter
Join Date: Jul 2009
Location: West Michigan
Posts: 133
Bikes: Jamis, Schwinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I will have to look at examples of how the cable are supposed to be routed. I bought the bike used, looked brand new, and it was delivered in a bike box. I put the handle bars back on and manipulated them a few different ways to see if the cables were twisted. The way I put them on seemed to be the correct way. But my brain sometimes freezes up and obvious things escape me.