Non-integrated 1-1/8" carbon for recommendations?
06-18-13, 09:14 AM
#1
Senior Member
Thread Starter
Join Date: Jun 2004
Location: Torrance, CA
Posts: 3,043
Bikes: Homebuilt steel
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 2083 Post(s)
Liked 400 Times
in
316 Posts
Non-integrated 1-1/8" carbon for recommendations?
Looking for a new fork for my lugged steel frame. Have a Look HSC 3 on the bike now and the steerer tube has slight indentations where the stem clamps down. Frame and fork have about 25k miles on them, and want to assure the bike stays safe. The HSC 3 is a little flexy, which makes me question long term durability too.
Maybe a little nit picky on my part, but not a big fan of integrated carbon forks with non-integrated head tube frames. First choice would be an Ozuo Pro, but new examples are difficult to find. Current fork is 45mm offset, but anything from 40-45 should be fine.
Been out of the sport for the last few years so out of touch a little. Saw some favorable comments about Enve forks but not sure what else to target.
Input appreciated...
Maybe a little nit picky on my part, but not a big fan of integrated carbon forks with non-integrated head tube frames. First choice would be an Ozuo Pro, but new examples are difficult to find. Current fork is 45mm offset, but anything from 40-45 should be fine.
Been out of the sport for the last few years so out of touch a little. Saw some favorable comments about Enve forks but not sure what else to target.
Input appreciated...
06-18-13, 09:44 AM
#2
Making a kilometer blurry
In the past I've bought Nashbar or Performance for these uses.
Something like:
https://www.nashbar.com/bikes/Product_10053_10052_174979_-1___202441
or
https://www.nashbar.com/bikes/Product...32_-1___202441
Something like:
https://www.nashbar.com/bikes/Product_10053_10052_174979_-1___202441
or
https://www.nashbar.com/bikes/Product...32_-1___202441
