Deda Newton - oversized
 

Deda Elementi - Newton 31 - 120mm, 31.7 bar, 28.6 fork

Italian made, aluminum CNC machined, excellent stem, few paint rubs but basically new. box & papers. i will trade for same bar/fork size just a shorter length.

wanted 3ttt 26.4 clamp / 90mm / silver if posible
Cheers

Have: Ritchey 4 Axis 120mm 17deg/73deg 31.8mm bar
Want: Ritchey 110mm 6deg 31.8mm (or other may be considered)

Have: Cannondale Controltech System Six Head stem.
100mm, 31.8mm x 1 1/8 steerer. 6 deg.

Want: Cannondale Controltech System Six Head stem.
90mm, 31.8mm x 1 1/8 steerer. 6 deg.

Have: Deda Elementi Quattro Stem. 130mm length, 31.8mm bar, 1 1/8 steerer, black

Want: Similar quality stem, black, 31.8mm bar size, but shorter (maybe 100mm)

Have:

Easton EA90, 120mm, 31.8mm bar, 1 1/8 steerer
3T ARX-PRO, 110mm, 31.8mm bar, 1 1/8 steerer

Want:

Easton EA90, 110mm OR 100mm, 31.8mm bar, 1 1/8 steerer

Want: Thomson X2 Black +/- 10o, 90mm, 31.8

Have: Ritchey WCS 120mm, 26.0; Super-rare Cinelli 120mm 1" Halving Stem, 26.0

Have: Thomson Elite 100mm x 7degree 25.4 in Black

Want: 1" Nitto Periscopa 120mm

Have:
Aplha-Q Prolite Stem 110mm 10 degree 25.4 clamp (has scratch along the body of stem)

Aplha-Q Prolite Stem 100mm 10 degree 25.4 clamp perfect shape

Want:
Thomson X4 31.8 100mm 10 degree

Have:
Syntace F99 Black (new style) 105mm x 1 1/8" x 25.4 clamp (mint/new - installed for sizing, but not ridden)
Syntace F119 Black (new style) 105 x 1 1/8" x 31.8 clamp (mint/new - installed for sizing, but not ridden)
Syntace F99 Black (old style) 105mm x 1 1/8" x 26.0 clamp (mint - installed for sizing, but not ridden)
KCNC Fly Ride 95mm x 1 1/8" x 31.8 clamp (used less than 10 road rides - scratch on underside of stem if installed for negative rise)

Want:
Deda Zero100's in Silver 110mm and Black in 100mm and 110mm (new or as close to new as possible)

I can provide high res pictures if needed and please provide pictures too if your stem is used.

Thanks.

Have: Ritchey 4-Axis 100mm stem 17 degree 1 1/8" threadless

Want: Similar stem in 90mm 17 degree

PM for pictures

have: 110mm steel nitto jaguar, njs.
want: 90-100mm nitto pearl, njs.

have: 100mm thomson x4 0degree stem used three rides.
want: something in 110 with no rise would be awesome if it was a thomson x4 as well

oh i have and it needs to be 31.8

HAVE: Nitto Pearl 12 (120mm) stem, very good condition

WANT: Nitto Pearl 10, 9, or 8 (100mm through 80mm) stem

You married to the 110 part or the Ritchey part?
I've got a Ritchey 100 6degree 31.8. Assume that's to short though.

have: deda logo 26.0mm stem, ±6° 110mm, 1-1/8 threadless steerer
want: 26.0mm threadless or quill stem, either 80mm or 90mm, any degree is ok.

I have two 120mm quill stems up for trade:

1. Silver ITM with "BIANCHI" pantographed on it, some scratches on the back of the vertical section and some scuffing inside the clamp.

2. Gunmetal 3T Motus with detachable faceplace, a piece of the cap that covers the bolt is chipped off, but that doesn't affect form or function, and there's a bit of rust on the bottom of the stem. (Note: See here for my post back in May about how the clamp cracked and I got a replacement free from 3T. The Motus has a bad design, but it seems that it is fine if you are very careful when you tighten the faceplate).

I'm looking for one or two silver 100mm quill stems of similar value.

http://i81.photobucket.com/albums/j2...g?t=1247407020

http://i81.photobucket.com/albums/j2...g?t=1247421842

Have:

3T ARX Team 110mm +-17, LN-

Need:

3T ARX Pro or Team (Team preferred) 100mm +-6, similar condition.

Give me a shout.

Stem
 

Have: Pro Powers Stem Threadless,,,,,,,,,,
90mm, 31.8mm x 1 1/8 steerer. 10+ deg rise.

Wanting---
70mm - 80mm,,,,, 31.8,,,,,, 1 1/8 steerer 12-16 deg rise

glen

Have: 100mm -17 degree 3T ARX LTD stem

Want: 110mm -17 degree 3T ARX LTD, Ritchey 4axis, Deda zero, etc. etc.

want: anything short w/ 1" steerer. preferably cheap.

Have:
Bontrager Race 110mm, 17 degrees, for 25.4/26.0 bar.
3TTT Forgie 120mm, 7 degree, for 25.4/26.0 bar.
3TTT Forgie XL 120mm, 7 degree, for 31.8 bar.
Cinelli quill 1R 130mm for 26.4
Cinelli quill 1R black 100mm for 26.4
3TTT quill smoked chrome 120mm for 25.4

Will have:
Bontrager Select 60mm 1" steerer to 25.4/26.0 clamp (in present use)

Need:
60mm 1" steerer (or with shim) to 31.8 clamp (no mountain heavyweights) Got it

Since I got what I need, PM me on trade items...

Looking for a red stem 90mm - 100mm

I have a 90mm Titec - Hell-Bent RIP 3D 6061 140g & 110mm 3T, THE4

Have: 90mm FSA OS-99 CSI

Want: 100mm or 110mm FSA OS-99 CSI

**