KMC Chains
#1
Senior Member
Thread Starter
Join Date: Jul 2010
Location: Somewhere Between The Beginning And The End
Posts: 1,995
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
KMC Chains
I picked up a chain at a local hardware/department store and the brand name is X-Factor....
all the links are stamped KMC, and cost $5.99 is anyone familiar with these, and are they any good?
all the links are stamped KMC, and cost $5.99 is anyone familiar with these, and are they any good?
#2
Death fork? Naaaah!!
They make a full range of chains that vary from good to really good. I run them on my own rides and use them in the shop. In fact, I prefer their reusable masterlink to Srams.
Sounds as if you have one from the lower end of the product line, like the Bell-branded KMC chains that wallyworld sells.
Top
Sounds as if you have one from the lower end of the product line, like the Bell-branded KMC chains that wallyworld sells.
Top
__________________
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
#3
Bike Junkie
Join Date: Jun 2005
Location: South of Raleigh, North of New Hill, East of Harris Lake, NC
Posts: 9,622
Bikes: Specialized Tarmac, Specialized Roubaix, Giant OCR-C, Specialized Stumpjumper FSR, Stumpjumper Comp, 88 & 92Nishiki Ariel, 87 Centurion Ironman, 92 Paramount, 84 Nishiki Medalist
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 68 Post(s)
Likes: 0
Liked 37 Times
in
27 Posts
KMC is good stuff but at $5.99, be sure it's for your application. Sounds like a single speed chain to me.
__________________
Roccobike BF Official Thread Terminator
Roccobike BF Official Thread Terminator
#5
Senior Member
Thread Starter
Join Date: Jul 2010
Location: Somewhere Between The Beginning And The End
Posts: 1,995
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
It's the correct chain for sure. They sell two different models one for single speed/3 speed and a 1/2"x3/32" for derailleured bikes, and that's the one I got. The brand is XFactor and the back of the package shows Kent International but the links are stamped KMC and also a few are stamped OA...... It came with one of those quick connect links like a Sram.
Last edited by Capecodder; 12-27-10 at 03:58 PM.
#6
Bike Junkie
Join Date: Jun 2005
Location: South of Raleigh, North of New Hill, East of Harris Lake, NC
Posts: 9,622
Bikes: Specialized Tarmac, Specialized Roubaix, Giant OCR-C, Specialized Stumpjumper FSR, Stumpjumper Comp, 88 & 92Nishiki Ariel, 87 Centurion Ironman, 92 Paramount, 84 Nishiki Medalist
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 68 Post(s)
Likes: 0
Liked 37 Times
in
27 Posts
That's a screaming bargain.
__________________
Roccobike BF Official Thread Terminator
Roccobike BF Official Thread Terminator
#7
Senior Member
Thread Starter
Join Date: Jul 2010
Location: Somewhere Between The Beginning And The End
Posts: 1,995
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
They have sold these for years, but I've never tried them cause I thought the were junk. I put it on my bike and it seems fine on the stand (shifts fine) too much snow to take it for a test ride. Maybe I should go get 3 or 4 more just to have on hand........
#8
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,039 Times
in
1,877 Posts
+1, KMC chains are very good value. Just be aware that the chain you purchased may not be index compatible. I've noticed that even though most hardware and X-mart store bicycles are indexed, the replacement chains they sell are often intended for bicycles with friction shifting systems.
#9
Senior Member
Thread Starter
Join Date: Jul 2010
Location: Somewhere Between The Beginning And The End
Posts: 1,995
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
+1, KMC chains are very good value. Just be aware that the chain you purchased may not be index compatible. I've noticed that even though most hardware and X-mart store bicycles are indexed, the replacement chains they sell are often intended for bicycles with friction shifting systems.
#11
Senior Member
Join Date: Mar 2010
Posts: 919
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Definitely not an X7 or higher line of KMC chain. Without a side view, I would guess a value line KMC.
Look for the Nasbar tandem (KMC X7) if you want a high quality cheap chain. Item is usually 1/2 off if on sale, plus another 15-20% on top with coupon code. Final cost is less than $6 if you cut the chain in 1/2.
Look for the Nasbar tandem (KMC X7) if you want a high quality cheap chain. Item is usually 1/2 off if on sale, plus another 15-20% on top with coupon code. Final cost is less than $6 if you cut the chain in 1/2.
#12
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,039 Times
in
1,877 Posts
It should work fine with an indexed shift system. The outer plates are chamfered on the inside to facilitate cog engagement. Chamfering and/or bulged plates are typical features of index compatible chains. Non-index compatible chains generally have flat plates, free of any chamfering or profiling, as they can be manually overshifted then trimmed back to accomplish the shift.
#13
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,504
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7350 Post(s)
Liked 2,475 Times
in
1,438 Posts
I've been putting KMC chains on lots of bikes lately, because the prices are irresistible. So far, so good, but I don't have any data on longevity. I suspect they are safe enough not to break. Putting them on is straightforward, so they have proven not to be junk.
Tom
Tom
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#14
Senior Member
Thread Starter
Join Date: Jul 2010
Location: Somewhere Between The Beginning And The End
Posts: 1,995
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
It should work fine with an indexed shift system. The outer plates are chamfered on the inside to facilitate cog engagement. Chamfering and/or bulged plates are typical features of index compatible chains. Non-index compatible chains generally have flat plates, free of any chamfering or profiling, as they can be manually overshifted then trimmed back to accomplish the shift.
They seem to be a well made chain, but only time will tell. Hope all is well.
#16
Thrifty Bill
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,526
Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more
Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1236 Post(s)
Liked 964 Times
in
628 Posts
The only chain I buy is KMC. Niagara sells a variety of sizes. The 5/6 speed stuff is $4.57 (Z30). $5.60 for the Z50 (6/7 speed). This covers most flips.
#17
Membership Not Required
Join Date: Jan 2005
Location: On the road-USA
Posts: 16,855
Bikes: Giant Excursion, Raleigh Sports, Raleigh R.S.W. Compact, Motobecane? and about 20 more! OMG
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 70 Post(s)
Likes: 0
Liked 15 Times
in
14 Posts
KMC fan here. I buy from a couple of sources. I have never had problems with them even the cheapest ones being used fairly long term.
Aaron
Aaron
__________________
Webshots is bailing out, if you find any of my posts with corrupt picture files and want to see them corrected please let me know. :(
ISO: A late 1980's Giant Iguana MTB frameset (or complete bike) 23" Red with yellow graphics.
"Cycling should be a way of life, not a hobby.
RIDE, YOU FOOL, RIDE!"_Nicodemus
"Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred
Which one would you rather have under your butt at 30mph?"_krazygluon
Webshots is bailing out, if you find any of my posts with corrupt picture files and want to see them corrected please let me know. :(
ISO: A late 1980's Giant Iguana MTB frameset (or complete bike) 23" Red with yellow graphics.
"Cycling should be a way of life, not a hobby.
RIDE, YOU FOOL, RIDE!"_Nicodemus
"Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred
Which one would you rather have under your butt at 30mph?"_krazygluon
#18
likes to ride an old bike
Join Date: Dec 2010
Location: Madison
Posts: 669
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I, too, heart me some KMC chains. Have ever since I was BMXing as a kid. Very well-made and the price is always right.
The X9 on my Ross came with a "KMC Equipped" sticker, and I affixed it directly over the ugly overspray that covers my seat tube in a gesture of semi-ironic pride.
Still on the fence as to whether the new bike will get a KMC chain or Campy, if it ends up as an indexed Campy 10 build...
The X9 on my Ross came with a "KMC Equipped" sticker, and I affixed it directly over the ugly overspray that covers my seat tube in a gesture of semi-ironic pride.
Still on the fence as to whether the new bike will get a KMC chain or Campy, if it ends up as an indexed Campy 10 build...
#20
Banned
Join Date: Jan 2007
Posts: 5,258
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 10 Times
in
6 Posts
KMC chains are very good. There is a fellow at RBR that did exhaustive tests on chains, and though KMC shifted well, and were quiet, he found that Campy chains lasted longer, when both elongation and width spread were measured exactly over a set mileage.
They are a bargain, but I've found that if I time things right, and buy smartly, a Campy chain is no more expensive.
I'm speaking of 10 speed chains only, so YMMV.
BTW, Jan, I'm putting a special treat in tomorrow's mail, it may take some sorting by you, but you should be occupied for weeks on end
Mid-December is a special time of year, this year did not disappoint. I trust you will be pleased.
They are a bargain, but I've found that if I time things right, and buy smartly, a Campy chain is no more expensive.
I'm speaking of 10 speed chains only, so YMMV.
BTW, Jan, I'm putting a special treat in tomorrow's mail, it may take some sorting by you, but you should be occupied for weeks on end
Mid-December is a special time of year, this year did not disappoint. I trust you will be pleased.
#22
No Money and No Sense
Join Date: Sep 2010
Location: Anderson, MO
Posts: 705
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The one on my 3-speed was frozen thanks to years of sitting; I lubed it, moved the links around, and have been riding it all year without problems. Before that I had a hybrid with a KMC chain I rode for years and never had any problems.
#23
Я люблю суп
Join Date: Jul 2008
Posts: 1,244
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
I don't think the Bell-branded chains are KMC. It has AVA stamped on the link.
The Bell branded chains are ok, I used them on a few of my bikes and all the flippers. I found them a bit noisy.
I love KMC for the price and durability. I used it with my 10 speed Ultegra. It was cheap, long lasting and quiet.
The Bell branded chains are ok, I used them on a few of my bikes and all the flippers. I found them a bit noisy.
I love KMC for the price and durability. I used it with my 10 speed Ultegra. It was cheap, long lasting and quiet.
#24
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,504
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7350 Post(s)
Liked 2,475 Times
in
1,438 Posts
I'm grateful for this thread. I thought I might be cheaping out on chains. I guess we've been deceived to believe we have to spend more. Any data on Shimano and SRAM chains?
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#25
Senior Member
Thread Starter
Join Date: Jul 2010
Location: Somewhere Between The Beginning And The End
Posts: 1,995
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
I have been using Sram chains for several years, and they have been flawless. I use the PC830 and they cost me about $12.00 each. I picked up the KMC to try as I've always wanted to give one a try and at $5.99 if I didn't like it no big loss.
Here are a couple close - ups of the SRAM and the KMC (SRAM on the right). As you can see the pins are much more refined on the SRAM than on the KMC and there is more gaps between the side plates and rollers on the KMC, the SRAM is much tighter in tolerence. It's obvious the SRAM is a better made chain, but this is a low end KMC so it's not a fair match-up. I'm sure the more expensive KMC chains are made better.
Last edited by Capecodder; 12-29-10 at 01:27 PM.