Changing the Gearing on my Touring Bike
#26
Senior Member
Join Date: Aug 2010
Location: Madison, WI
Posts: 11,334
Bikes: 1961 Ideor, 1966 Perfekt 3 Speed AB Hub, 1994 Bridgestone MB-6, 2006 Airnimal Joey, 2009 Thorn Sherpa, 2013 Thorn Nomad MkII, 2015 VO Pass Hunter, 2017 Lynskey Backroad, 2017 Raleigh Gran Prix, 1980s Bianchi Mixte on a trainer. Others are now gone.
Mentioned: 48 Post(s)
Tagged: 0 Thread(s)
Quoted: 3523 Post(s)
Liked 1,500 Times
in
1,172 Posts
Photo is from my rando bike with chain catcher.
#27
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,464
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 153 Post(s)
Tagged: 1 Thread(s)
Quoted: 6275 Post(s)
Liked 4,302 Times
in
2,411 Posts
I use friction shifting for my triples; thumb-shifters can be had for under $20, though the finish on the $30-50 models are much higher quality.
The chain keeper is mostly (in my experience) helpful when there is a large drop from middle to small ring - the chain can miss the small ring and can be difficult to get unstuck. The first time you wrap a chain around the bottom bracket and frame, you'll wish you had one.
The derailleur might ride high on any non-standard rings. There is a reason Shimano makes several cranks with near perfect 10-tooth steps: the derailleur swings out and over each ring with (relatively) small clearances. That said, from the anecdotes here, and my own experience, it is not a practical problem - at least, for touring.
The chain keeper is mostly (in my experience) helpful when there is a large drop from middle to small ring - the chain can miss the small ring and can be difficult to get unstuck. The first time you wrap a chain around the bottom bracket and frame, you'll wish you had one.
The derailleur might ride high on any non-standard rings. There is a reason Shimano makes several cranks with near perfect 10-tooth steps: the derailleur swings out and over each ring with (relatively) small clearances. That said, from the anecdotes here, and my own experience, it is not a practical problem - at least, for touring.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#28
Newbie
Join Date: Jan 2013
Location: Wales
Posts: 54
Bikes: 1979 Trek 412, 2011 Dawes Ultra Galaxy
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Liked 58 Times
in
23 Posts
Shimano makes a 12-36 rear cassette that works well with the 48/36/26 front crank. I made the change from the 11-34 and love it. The 26 granny and 36 rear get me up most hills here in Wales - with luggage!
#30
Senior Member
My Bruce Gordon was designed for touring from the beginning, it has a 46/36/24 on the front, and seven cogs in the rear. I use it as three separate 'ranges.' The 24 gets used with the three largest rear cogs, at which point it overlaps with the middle ring which gets used with the rear gears 2-5. The 46 gets used with the 5-7 on the rear, but the combination of Vermont's terrain and my puny muscles makes that a rare event.
#31
Recreational Road Cyclist
Join Date: Sep 2013
Location: MetroWest, Mass.
Posts: 556
Bikes: 1990 Peter Mooney road bike
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 257 Post(s)
Liked 254 Times
in
136 Posts
My setup is a 42/37/24 triple, with a 13-28 9 speed cassette. I use an Ultegra GS RD, and a CX70 front derailler, which is not spec'd for a triple but works just fine. With this setup, I ride primarily in the middle/37 ring.
The cassette is a modified Shimano HG-50 13-25. As stock, it has 13-14-15-16-17-19-21-23-25. I remove the 14 and add a Miche 28T at the back, for 13-15-16-17-19-21-23-25-28. I do most of my riding in 15-16-17, one-tooth steps, very comfortable. The 37-28 is low enough for most of my riding, but when I hit the occasional killer hill, I have a lowest gear of 24-28. Works every time!
I use 42 big ring and the 13 first position cog to pedal downhill. That is plenty high for me.
What matters most to me is comfortable steps between gears, and this setup works for that. I have ten usable, sequential steps, plus the granny. If you're wondering why I have a 37T middle ring rather than the more-common 36 or 38, it was on sale at Harris Cyclery one day while I was in. I would have preferred a 38T, but they were sold out! When/if it wears out I will replace it with a 38T. I like TA chainrings, available in every size and BCD.
All best.
Last edited by BCDrums; 06-14-21 at 06:56 PM.
#32
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,464
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 153 Post(s)
Tagged: 1 Thread(s)
Quoted: 6275 Post(s)
Liked 4,302 Times
in
2,411 Posts
I have a couple of Race Face 94/58 BCD cranks from the late 90s that take 20 tooth inners. Those are on my nonShimano (i.e. no Shimano allowed) mountain bikes. On my touring bike and another mountain bike I have 104/64 XT Hollowtech II. I’ve modified the inner ring by filing away some of the post material to fit a 20 tooth inner. Here’s a video I used (not mine) to modify the crank
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#33
Miles to Go
What is your goal in changing the big ring? You want to get out of the middle ring and spend more time in the big ring?
I have 26/36/48 rings, and don't use the tallest 1/2 of the gears in the big ring, but I have all the gears I need.
I have 26/36/48 rings, and don't use the tallest 1/2 of the gears in the big ring, but I have all the gears I need.
#34
Junior Member
#35
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,464
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 153 Post(s)
Tagged: 1 Thread(s)
Quoted: 6275 Post(s)
Liked 4,302 Times
in
2,411 Posts
And all this is while using indexed STI shifters.
Furthermore, a chain catcher is cheap, weighs less than an ounce, and is readily available -- suggesting that many cyclists still find them useful, including some of the respondents in this thread.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#36
Junior Member