Best Endurance/All Road Bike
#26
Senior Member
Join Date: May 2021
Posts: 8,710
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 4544 Post(s)
Liked 5,050 Times
in
3,118 Posts
Likes For PeteHski:
#27
Method to My Madness
Join Date: Nov 2020
Location: Orange County, California
Posts: 3,801
Bikes: Trek FX 2, Cannondale Synapse x2, Cannondale CAAD4, Santa Cruz Stigmata 3
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 2039 Post(s)
Liked 1,533 Times
in
1,062 Posts
I am also (but not too seriously) looking at 3 of the bikes listed in this thread (mainly to get disc brakes) on about half of the OP's budget, i.e., $5,000, and so am aiming for a mechanical Ultegra build. I can afford but do not want to spend more because I am under no delusion that I will become any faster. My uninformed opinion:
1. Bianchi Infinito CV: Italian premium (yes I know the frame is made in Taiwan), renowned celeste color, weird (more fragile?) seat post. Geometry closest to my current road bike.
2. Argon 18 Krypton GF (not Pro): Intrigued by review on Gran Fondo magazine, but have not found a dealer to try it. Must get it built to get Shimano Ultegra components, but then at least I can get a short cage rear derailleur.
3, Canyon Endurace: Least expensive, but only comes in black. My leg muscles are not strong enough for 52/36, so requires swap to 50/34 on day 1. Waiting for Canyon showroom in Carlsbad to reopen in mid-June to take a look and ask if that is possible.
1. Bianchi Infinito CV: Italian premium (yes I know the frame is made in Taiwan), renowned celeste color, weird (more fragile?) seat post. Geometry closest to my current road bike.
2. Argon 18 Krypton GF (not Pro): Intrigued by review on Gran Fondo magazine, but have not found a dealer to try it. Must get it built to get Shimano Ultegra components, but then at least I can get a short cage rear derailleur.
3, Canyon Endurace: Least expensive, but only comes in black. My leg muscles are not strong enough for 52/36, so requires swap to 50/34 on day 1. Waiting for Canyon showroom in Carlsbad to reopen in mid-June to take a look and ask if that is possible.
#28
Senior Member
Join Date: Jan 2020
Location: San Jose
Posts: 1,025
Bikes: Blur / Ibis Hakka MX / team machince alr2 / topstone 1
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 426 Post(s)
Liked 274 Times
in
201 Posts
I would like a Ti frame just because I think it looks more like a "bike" than carbon frame. I bought a Giant carbon bike because it's about 2k cheaper for the same group set. I don't think the Ti frame is worth the extra 2k up lift charge over the carbon frame. If there where the same price I would buy the Ti bike over the carbon bike even though the carbon frame is probably functionally a better frame.
#29
Senior Member
Join Date: May 2021
Posts: 8,710
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 4544 Post(s)
Liked 5,050 Times
in
3,118 Posts
I would like a Ti frame just because I think it looks more like a "bike" than carbon frame. I bought a Giant carbon bike because it's about 2k cheaper for the same group set. I don't think the Ti frame is worth the extra 2k up lift charge over the carbon frame. If there where the same price I would buy the Ti bike over the carbon bike even though the carbon frame is probably functionally a better frame.
I don't have a problem with Ti bikes and I do quite like the classic look. But I wouldn't choose one over a modern carbon frame for various reasons. If someone has a large budget, it certainly doesn't mean they ought to automatically choose a custom Ti frame, as if anything else is inferior. That was my point really.
#30
Senior Member
Join Date: Jan 2020
Location: San Jose
Posts: 1,025
Bikes: Blur / Ibis Hakka MX / team machince alr2 / topstone 1
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 426 Post(s)
Liked 274 Times
in
201 Posts
You mean a Ti frame looks more like an old bike? Or do you think your Giant carbon bike actually looks like something else?
I don't have a problem with Ti bikes and I do quite like the classic look. But I wouldn't choose one over a modern carbon frame for various reasons. If someone has a large budget, it certainly doesn't mean they ought to automatically choose a custom Ti frame, as if anything else is inferior. That was my point really.
I don't have a problem with Ti bikes and I do quite like the classic look. But I wouldn't choose one over a modern carbon frame for various reasons. If someone has a large budget, it certainly doesn't mean they ought to automatically choose a custom Ti frame, as if anything else is inferior. That was my point really.
https://www.giant-bicycles.com/us/re...dvanced-2-2021
if there where the same price I would have went with the probably heavier Ti bike. I kind of like the older bike look that you call it.
#31
Senior Member
Join Date: May 2021
Posts: 8,710
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 4544 Post(s)
Liked 5,050 Times
in
3,118 Posts
I like my Giant revolt gravel bike for $2600. No complaints. For $50 more than just a lynskey frame and fork I got fully functioning bike. It was a no brainer.
https://www.giant-bicycles.com/us/re...dvanced-2-2021
if there where the same price I would have went with the probably heavier Ti bike. I kind of like the older bike look that you call it.
https://www.giant-bicycles.com/us/re...dvanced-2-2021
if there where the same price I would have went with the probably heavier Ti bike. I kind of like the older bike look that you call it.
#32
Senior Member
Don't really have an opinion on the choices vs one another, just wanted to share my build. I got this Domane SL6 for a steal last year from someone local decided he really wanted an Emonda SLR frame apparently after two rides with it and I tried to resell it...ebay buyer returned it with some bs excuses...so it sat in boxes for almost a year. With the bike drought and all decided this year to build it and keep it, throwing a few summer upgrades for it. Its my first endurance geo bike .
Plan is come fall to throw some Panaracers or WTB Riddlers on the stock Paradigm wheels for some gravel duty.
Plan is come fall to throw some Panaracers or WTB Riddlers on the stock Paradigm wheels for some gravel duty.
Last edited by Esthetic; 05-30-21 at 07:48 PM.
Likes For Esthetic:
#33
Senior Member
Join Date: Jan 2020
Location: San Jose
Posts: 1,025
Bikes: Blur / Ibis Hakka MX / team machince alr2 / topstone 1
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 426 Post(s)
Liked 274 Times
in
201 Posts
Seems like on any bike that cost over 1k you get a carbon fork. steel, aluminum, Ti, Carbon frame bikes all get a carbon fork. I guess the strength to weight, vibration damping, cost to make must make it the ideal fork material.
#35
Senior Member
Join Date: May 2021
Posts: 8,710
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 4544 Post(s)
Liked 5,050 Times
in
3,118 Posts
That was my point. Logic follows that carbon is the ideal frame material too.
Likes For PeteHski:
#36
Senior Member
Join Date: May 2021
Posts: 8,710
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 4544 Post(s)
Liked 5,050 Times
in
3,118 Posts
I have to say I've been very happy with my Defy Pro. I picked it up new for £2k in an end of season shop sale in Dec '19, which was a total bargain for full carbon frame and wheels. Groupset is only 105 (R7000), but I can't honestly tell any difference between 105 and Ultegra mechanical. The Ultegra version was an extra £600 in the same sale and otherwise identical, so I decided to save the cash.
But our local roads are so crappy I'm now wondering whether I should get something like a Specialized Roubaix. The front shock sounds like just the thing I need for the rough country lanes full of potholes. My Defy actually copes really well compared to other road bikes I've ridden, but it still gets a battering, especially at the front end.
But our local roads are so crappy I'm now wondering whether I should get something like a Specialized Roubaix. The front shock sounds like just the thing I need for the rough country lanes full of potholes. My Defy actually copes really well compared to other road bikes I've ridden, but it still gets a battering, especially at the front end.
#37
Full Member
Join Date: Feb 2014
Location: Lehigh Valley
Posts: 258
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 132 Post(s)
Liked 58 Times
in
46 Posts
Now that I'm finally past the point of having super young kids and starting/stopping riding over the last 6 years, it is now time to upgrade my 12 year old Felt. I have a healthy budget but doesn't seem like I need to spend $10k to get what I want (under $8k lots of options). I don't need the bike ASAP but would like a new one prior to next summer at a minimum.
Must haves:
Full Carbon Frame and pretty much everything else (would consider Ti)
Electronic Shifting (Force or Ultegra Di2, Red/DA not necessary)
Disc Brakes
Ability to mostly ride on the road/paths but have some packed dirt/gravel/rough road capability (ie 28-30 tires)
17ish lbs or less. Still would like to be under 18 lbs
Used from TPC is just fine, I love buying used as it gets all the dings and blemishes at a discount vs me doing it at some point anyway
I'm 6-0 with a 33ish inseam so right at a 56/58 depending on brand.
Looking for any opinions on the below Endurance/All Road-ish bikes or any other opinions. Guessing any one of these would completely work but I'm assuming I'm not the first person to compare these. Guessing it boils down to price more than anything.
Canyon Endurace CF SLX 8.0 eTap: Seems like for $6k its pretty loaded, especially with the built in power meter. Also it can ship today
Cervelo Caledonia 5: $6.5-$7 for di2/SRAM feels decent.
S-Works Roubaix: Can find used ones on Pro's Closet for $8k. There was one for $6.5k I should have snatched up but I was too slow. Wouldn't consider a new one at $10k but used seems doable. Still pricey at $8k from TPC.
Trek Domane SL/SLR 6 and Up. Lots of options here, some of the lower tiers feel a bit heavy.
Allied All Road. Love the functionality of this but not sure I need it to be this gravel intense? Adding any customization and it gets pretty expensive.
Thanks all
Must haves:
Full Carbon Frame and pretty much everything else (would consider Ti)
Electronic Shifting (Force or Ultegra Di2, Red/DA not necessary)
Disc Brakes
Ability to mostly ride on the road/paths but have some packed dirt/gravel/rough road capability (ie 28-30 tires)
17ish lbs or less. Still would like to be under 18 lbs
Used from TPC is just fine, I love buying used as it gets all the dings and blemishes at a discount vs me doing it at some point anyway
I'm 6-0 with a 33ish inseam so right at a 56/58 depending on brand.
Looking for any opinions on the below Endurance/All Road-ish bikes or any other opinions. Guessing any one of these would completely work but I'm assuming I'm not the first person to compare these. Guessing it boils down to price more than anything.
Canyon Endurace CF SLX 8.0 eTap: Seems like for $6k its pretty loaded, especially with the built in power meter. Also it can ship today
Cervelo Caledonia 5: $6.5-$7 for di2/SRAM feels decent.
S-Works Roubaix: Can find used ones on Pro's Closet for $8k. There was one for $6.5k I should have snatched up but I was too slow. Wouldn't consider a new one at $10k but used seems doable. Still pricey at $8k from TPC.
Trek Domane SL/SLR 6 and Up. Lots of options here, some of the lower tiers feel a bit heavy.
Allied All Road. Love the functionality of this but not sure I need it to be this gravel intense? Adding any customization and it gets pretty expensive.
Thanks all
I wonder if you ever looked into the T-lab R3 Omni that was mentioned earlier.
#38
Senior Member
Thread Starter
Join Date: Jan 2007
Location: Minneapolis
Posts: 549
Bikes: Moots Vamoots RCS, Serotta Ti, Felt F55, Surly Ogre
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 37 Post(s)
Likes: 0
Liked 38 Times
in
12 Posts
I'm still checking TPC often to see if anything pops up there but hasn't been anything in a while that has peaked my interest. A lot of nice bikes but not quite what I am looking for.
Also I did buy a slew of new (used) parts for an older Klein (started a thread on that too looking for different kind of advice) so that has been taking up a bit more time. Gives me something to tinker with in the garage and learn more about bike wrenching. Doing a 100% rebuild, the only thing original will be the frame/fork but every other part is going to be replaced.
#39
Senior Member
Join Date: Apr 2013
Location: Colorado
Posts: 557
Bikes: 2021 Trek Checkpoint SL (GRX Di2), 2020 Domane SLR 9 (very green), 2016 Trek Emonda SL, 2009 Bianchi 928, 1972 Atala Record Pro
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Likes: 0
Liked 143 Times
in
55 Posts
OP: Late to the dance and a sample of one, so take it with a grain of salt. I've had three Domanes, one from each generation, all with di2 and the highest end wheels and pieces Bontrager makes. The last two have been disc. The weight has gone from 16 all in on a 58cm frame to a bit north of 18 on the current SLR, which is a 56cm. Despite the weight gain, the bike has gotten both significantly more comfortable, faster and more versatile. I have a second set of wheels running 40mm gravel tires. There is nothing this bike does not do well. On the road, it basically disappears under you. On rough stuff, it provides a level of control and security that allows me to ride events pointed toward dedicated gravel bikes and riders.
Last edited by tigat; 06-24-21 at 10:14 AM. Reason: typo
Likes For tigat:
#40
Senior Member
Thread Starter
Join Date: Jan 2007
Location: Minneapolis
Posts: 549
Bikes: Moots Vamoots RCS, Serotta Ti, Felt F55, Surly Ogre
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 37 Post(s)
Likes: 0
Liked 38 Times
in
12 Posts
OP: Late to the dance and a sample of one, so take it with a grain of salt. I've had three Domanes, one from each generation, all with di2 and the highest end wheels and pieces Bontrager makes. The last two have been disc. The weight has gone from 16 all in on a 58cm frame to a bit north of 18 on the current SLR, which is a 56cm. Despite the weight gain, the bike has gotten both significantly more comfortable, faster and more versatile. I have a second set of wheels running 40mm gravel tires. There is nothing this bike does not do well. On the road, it basically disappears under you. On rough stuff, it provides a level of control and security that allows me to ride events pointed toward dedicated gravel bikes and riders.
#41
Junior Member
Join Date: Mar 2021
Posts: 13
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 5 Times
in
3 Posts
Was very recently looking for pretty much the same specs.
My very short list had the Caledonia 5, Krypton Pro and Roadmachine. I wound-up going in a different direction, but would have been very happy with either the Cervelo or BMC. Only downside really is the weight at ~18 lbs.
My very short list had the Caledonia 5, Krypton Pro and Roadmachine. I wound-up going in a different direction, but would have been very happy with either the Cervelo or BMC. Only downside really is the weight at ~18 lbs.
#42
Senior Member
Thread Starter
Join Date: Jan 2007
Location: Minneapolis
Posts: 549
Bikes: Moots Vamoots RCS, Serotta Ti, Felt F55, Surly Ogre
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 37 Post(s)
Likes: 0
Liked 38 Times
in
12 Posts
Was very recently looking for pretty much the same specs.
My very short list had the Caledonia 5, Krypton Pro and Roadmachine. I wound-up going in a different direction, but would have been very happy with either the Cervelo or BMC. Only downside really is the weight at ~18 lbs.
My very short list had the Caledonia 5, Krypton Pro and Roadmachine. I wound-up going in a different direction, but would have been very happy with either the Cervelo or BMC. Only downside really is the weight at ~18 lbs.
#43
Junior Member
Join Date: Mar 2021
Posts: 13
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 5 Times
in
3 Posts
Getting a complete bike, outfitted the way I wanted would have taken at least a few months to track down. Saw a Specialized Tarmac frame in black and 56cm, so scooped it up and ordered parts from different online vendors. With 28mm tubeless tires running at 60psi, it is more comfortable than the Madone it was replacing.
#44
Full Member
Join Date: Feb 2014
Location: Lehigh Valley
Posts: 258
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 132 Post(s)
Liked 58 Times
in
46 Posts
I haven't pulled the trigger on anything but I will say that I have definitely expanded the search a bit more. There were a number of different brands I hadn't heard of (or barely knew) so been poking around those sites quite a lot. I think I have determined I probably need to ride a carbon bike and a titanium bike to see if I can determine any differences. Exploring all the custom design for Ti bikes has been intriguing as I could design something 100% to my liking. Building the T-Lap Omini with a slew of upgrades is comparable/cheaper to some other alternatives.
I'm still checking TPC often to see if anything pops up there but hasn't been anything in a while that has peaked my interest. A lot of nice bikes but not quite what I am looking for.
Also I did buy a slew of new (used) parts for an older Klein (started a thread on that too looking for different kind of advice) so that has been taking up a bit more time. Gives me something to tinker with in the garage and learn more about bike wrenching. Doing a 100% rebuild, the only thing original will be the frame/fork but every other part is going to be replaced.
I'm still checking TPC often to see if anything pops up there but hasn't been anything in a while that has peaked my interest. A lot of nice bikes but not quite what I am looking for.
Also I did buy a slew of new (used) parts for an older Klein (started a thread on that too looking for different kind of advice) so that has been taking up a bit more time. Gives me something to tinker with in the garage and learn more about bike wrenching. Doing a 100% rebuild, the only thing original will be the frame/fork but every other part is going to be replaced.
Good luck and maybe update the thread when you think of it for those following along.
#45
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20810 Post(s)
Liked 9,456 Times
in
4,672 Posts
Getting a complete bike, outfitted the way I wanted would have taken at least a few months to track down. Saw a Specialized Tarmac frame in black and 56cm, so scooped it up and ordered parts from different online vendors. With 28mm tubeless tires running at 60psi, it is more comfortable than the Madone it was replacing.
#47
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20810 Post(s)
Liked 9,456 Times
in
4,672 Posts
Likes For RichLV:
#49
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20810 Post(s)
Liked 9,456 Times
in
4,672 Posts
Okay, cool. A word to the wise, though - if it's been a few months, you're really going to want to make sure that you've still got enough good sealant in the tires - it doesn't last forever. I've had OS last a few months or so in the front tire (which typically sees fewer punctures), but it's more common for me to need to top off after 5-6 weeks. Of course, YMMV, depending upon road conditions and, well, mileage.