My winter build completed: 1986 Vitus 979 Road Bike!
#1
Road Rider
Thread Starter
Join Date: Apr 2016
Location: Vermont, USA
Posts: 33
Bikes: Refurbished 1986 Vitus 979, 1978 Holdsworth, 1976 Fuji, 2012 Breezer Lightning Pro MTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My winter build completed: 1986 Vitus 979 Road Bike!
Here's my winter 2015 project--a complete overhaul, refurbishment and upgrade of my 1986 Vitus aluminum road bike.
I created custom graphics for the bike (I'm a professional designer), since the old decals were ugly and scratched. I had a local signmaker cut the vinyl film for me. While purists may recoil at this, I make no apologies--it's my bike, and I like the way it looks!
I also decided to add orange accents to the bike, not just for some bling, but also for a little added visibility to drivers. Silver and black tend to be somewhat muted, and the orange helps with that.
I replaced the bottom bracket with a ceramic bearing one, which I got for half-price! But, the crankset then had to be replaced, because the new BB only fits Campagnolo cranksets. I found a Record alloy crankset that was rebranded as a Chorus, which was another decent bargain, for a top of the line crankset. Pedals are clipless Mavic Zxellium SL's (made by Time), which are half the weight of the Look clipless pedals the bike used to have.
The drivetrain retains the original Dura Ace 7400 derailleurs, which were cleaned up and overhauled. They're in very good shape, as are the brakes, which received the same amount of TLC. The freewheel is a SunTour Winner Pro 7-speed which is brand new, and has been in storage for 30 years. I did swap out a couple of cogs with lightly used ones on it, to get better gearing. The chain is a KMC X8.99.
The Mavic CXP Pro wheels and Dura Ace 7400 hubs were also built from scratch with Sapim Laser DB spokes, and they wear Continental Attack & Force tires. I replaced the Dura Ace quick release skewers with lightweight Halo allen key skewers.
I also replaced the headset with a sealed bearing Woodman--it's really elegant, lightweight and economical. Handlebars are Modolo anatomic X-Tenos which are NOS, fitted to the bike with an SR Sakae quill stem I've had forever. The carbon-look tape is capped with chrome bar ends which I customized with orange anodized paint, to match the other orange accents on the bike.
The shifters are another blast from the past. The bike originally had Dura Ace 7400 indexed shifters, but they were broken. I've never been a fan of indexed shifting anyway, so I changed the shifters to friction Modolo Kronos levers. I had a pair of these once before which I loved, and managed to find a pair online. They are also modified with orange anodized dome bolts (secured with some low-strength threadlocker).
The Specialized carbon fiber bottle cages I've had on my steel bike for 29 years were transferred to this bike, and are bolted on with the same style fasteners I used for the shifters.
The saddle is my faithful Viscount titanium rail model, which was also on my steel bike. It is significantly lighter than the one that was on the Vitus previously.
In total, I managed to shave another twelve ounces off the bike's weight. It weighs 18.45 pounds without the pack and bottle; 19.2 lbs with. My steel road bike by comparison, is 23.6 lbs, so I'm sure this bike will feel much different. First ride of my renovated baby will be this week!
I created custom graphics for the bike (I'm a professional designer), since the old decals were ugly and scratched. I had a local signmaker cut the vinyl film for me. While purists may recoil at this, I make no apologies--it's my bike, and I like the way it looks!
I also decided to add orange accents to the bike, not just for some bling, but also for a little added visibility to drivers. Silver and black tend to be somewhat muted, and the orange helps with that.
I replaced the bottom bracket with a ceramic bearing one, which I got for half-price! But, the crankset then had to be replaced, because the new BB only fits Campagnolo cranksets. I found a Record alloy crankset that was rebranded as a Chorus, which was another decent bargain, for a top of the line crankset. Pedals are clipless Mavic Zxellium SL's (made by Time), which are half the weight of the Look clipless pedals the bike used to have.
The drivetrain retains the original Dura Ace 7400 derailleurs, which were cleaned up and overhauled. They're in very good shape, as are the brakes, which received the same amount of TLC. The freewheel is a SunTour Winner Pro 7-speed which is brand new, and has been in storage for 30 years. I did swap out a couple of cogs with lightly used ones on it, to get better gearing. The chain is a KMC X8.99.
The Mavic CXP Pro wheels and Dura Ace 7400 hubs were also built from scratch with Sapim Laser DB spokes, and they wear Continental Attack & Force tires. I replaced the Dura Ace quick release skewers with lightweight Halo allen key skewers.
I also replaced the headset with a sealed bearing Woodman--it's really elegant, lightweight and economical. Handlebars are Modolo anatomic X-Tenos which are NOS, fitted to the bike with an SR Sakae quill stem I've had forever. The carbon-look tape is capped with chrome bar ends which I customized with orange anodized paint, to match the other orange accents on the bike.
The shifters are another blast from the past. The bike originally had Dura Ace 7400 indexed shifters, but they were broken. I've never been a fan of indexed shifting anyway, so I changed the shifters to friction Modolo Kronos levers. I had a pair of these once before which I loved, and managed to find a pair online. They are also modified with orange anodized dome bolts (secured with some low-strength threadlocker).
The Specialized carbon fiber bottle cages I've had on my steel bike for 29 years were transferred to this bike, and are bolted on with the same style fasteners I used for the shifters.
The saddle is my faithful Viscount titanium rail model, which was also on my steel bike. It is significantly lighter than the one that was on the Vitus previously.
In total, I managed to shave another twelve ounces off the bike's weight. It weighs 18.45 pounds without the pack and bottle; 19.2 lbs with. My steel road bike by comparison, is 23.6 lbs, so I'm sure this bike will feel much different. First ride of my renovated baby will be this week!
#2
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,437
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5890 Post(s)
Liked 3,475 Times
in
2,080 Posts
Wow, this is an absolutely beautiful bike. I'm restoring an old racing bike (a '78 Trek TX 900) but I think you just set the bar on a restore job. Nice job.
#3
Road Rider
Thread Starter
Join Date: Apr 2016
Location: Vermont, USA
Posts: 33
Bikes: Refurbished 1986 Vitus 979, 1978 Holdsworth, 1976 Fuji, 2012 Breezer Lightning Pro MTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks, bikemig!
#5
Steel is real
Join Date: May 2016
Location: Stockholm, Sweden
Posts: 1,107
Bikes: 40 - accumulated over 40 years
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 377 Post(s)
Liked 1,090 Times
in
305 Posts
Are you comfortable with the saddle in that position? It looks as it is in a somewhat far back? If it is by choice - do not pay any attention to me. If it is by chance - try it a little more to the front.
#6
Road Rider
Thread Starter
Join Date: Apr 2016
Location: Vermont, USA
Posts: 33
Bikes: Refurbished 1986 Vitus 979, 1978 Holdsworth, 1976 Fuji, 2012 Breezer Lightning Pro MTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks for the kind comments, carbomb and styggno1!
Yep, I am comfortable with the saddle position--but I appreciate your input, nevertheless. I use the forearm plus 1" rule for positioning the saddle relative to the handlebars. I've been riding for 38 years, and have no complaints.
The frame of this bike is slightly smaller than what I normally ride, but many people who rode Vitus bikes back in the day did that to reduce frame flex. Sean Kelly rode Vitus bikes when he raced, and he too, rode a smaller frame than his usual.
Yep, I am comfortable with the saddle position--but I appreciate your input, nevertheless. I use the forearm plus 1" rule for positioning the saddle relative to the handlebars. I've been riding for 38 years, and have no complaints.
The frame of this bike is slightly smaller than what I normally ride, but many people who rode Vitus bikes back in the day did that to reduce frame flex. Sean Kelly rode Vitus bikes when he raced, and he too, rode a smaller frame than his usual.
#7
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,016
Bikes: Yes, please.
Mentioned: 281 Post(s)
Tagged: 0 Thread(s)
Quoted: 2200 Post(s)
Liked 4,633 Times
in
1,774 Posts
+1. Couldn't have said it any better.
#8
Death fork? Naaaah!!
Were the main tubes and stays polished from the factory?
Top
Top
__________________
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
#9
Junior Member
Join Date: Nov 2014
Location: Eroica CA land
Posts: 8
Bikes: '79 Raleigh Competition GS, early 80s Basso Gap, '82 Fuji Royale II, '93 Paramount 50 PDG, '04 Klein Reve, '08 Giant Trance X1, '08 Time Edge Racer
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
+2. Nice component mix, beautiful restrained frame graphics. I always admired the Vitus frames but couldn't ride one - a bit too flexy for me.
#10
Newbie
Join Date: Feb 2016
Posts: 2
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
You did a beautiful job.
I have a Vitus 979 of similar vintage with odds and ends for parts, but nowhere near as clean as yours.
Here's a pic of it after I'd cleaned it up, best I could.
Vintage Vitus by RanchoRunner, on Flickr
#11
Senior Member
Join Date: Apr 2014
Location: SF Bay Area
Posts: 681
Bikes: the bikes own me
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 18 Post(s)
Likes: 0
Liked 4 Times
in
3 Posts
Really nice work @Areion! I like the new graphics. The whole package really works. With a Campy crank and Shimano derailleurs and brakes its a whole new take on Shimergo. Or would that be Shimagnolo?
#12
Senior Member
Join Date: Jun 2015
Location: Melbourne, Australia
Posts: 705
Bikes: 1974 Copper Raleigh International, 1975 Olive Green Raleigh Grand Prix, 1974 Raleigh Europa Custom
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 104 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Very tastefully done restoration. The colour accents work as they're isolated from each other so you don't get a visual mismatch.
By isolating the orange you've created an intensity too.
By isolating the orange you've created an intensity too.
Last edited by Vintage Raleigh; 05-10-16 at 09:22 PM.
#13
Senior Member
Join Date: May 2015
Location: Richmond VA area
Posts: 2,618
Bikes: '00 Koga Miyata Full Pro Oval Road bike.
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 475 Post(s)
Likes: 0
Liked 8 Times
in
7 Posts
I agree with the others, it looks great. It also looks unique, which is a nice thing in the often cookie cutter world of vintage bikes. I'm curious how you'll like the stiffness of the frame compared to your steel bike. I remember when those bikes were new, that Vitus tubing was considered quite revolutionary. And I have heard people say the frames are flexy but who knows, sometimes the rep is undeserved. I've never had the opportunity to ride one myself.
#14
Senior Member
Join Date: Aug 2006
Location: Portland OR
Posts: 7,639
Bikes: 61 Bianchi Specialissima 71 Peugeot G50 7? P'geot PX10 74 Raleigh GranSport 75 P'geot UO8 78? Raleigh Team Pro 82 P'geot PSV 86 P'geot PX 91 Bridgestone MB0 92 B'stone XO1 97 Rans VRex 92 Cannondale R1000 94 B'stone MB5 97 Vitus 997
Mentioned: 146 Post(s)
Tagged: 0 Thread(s)
Quoted: 392 Post(s)
Likes: 0
Liked 49 Times
in
31 Posts
That is very nice indeed! I have a real soft spot for 979s.
#15
Road Rider
Thread Starter
Join Date: Apr 2016
Location: Vermont, USA
Posts: 33
Bikes: Refurbished 1986 Vitus 979, 1978 Holdsworth, 1976 Fuji, 2012 Breezer Lightning Pro MTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks everyone, for the kind comments. Here are the answers to the questions asked:
@top506--As best as I can tell, the frame tubes were anodized, with maybe a clear coat on top? When I removed the factory graphics, I could see a slight ghost of the old decal where the finish had lightened around it from UV exposure. Vitus sold other colors, but the rear stays, connecting lugs, head tube and the fork were always left as natural aluminum. I did hand polish my frame, but there are still some nicks and scratches that I couldn't get out from the previous owner (my late best friend). For me, those add to the bike's character, and will always remind me of my friend.
@fishwatcher--Nice bike! I love the light blue color! What frame size is yours, a 54cm? Mine is a 52cm.
@eastbay71--LOL, yeah, the drivetrain components are an interesting mix. The freewheel is a SunTour Winner Pro, so maybe it should be called a Shimtourolo?
@exmechanic89--Yeah, after riding a steel bike (Reynolds 531 tubing) for so many years, I'm also curious as to how the Vitus will feel? I have heard many people love the way they ride, but they're better suited to lightweight riders, like myself. I weigh 143, so I'm hoping there won't be much flex? I'll let you know--I'm taking the bike out for its first ride, tomorrow!
@top506--As best as I can tell, the frame tubes were anodized, with maybe a clear coat on top? When I removed the factory graphics, I could see a slight ghost of the old decal where the finish had lightened around it from UV exposure. Vitus sold other colors, but the rear stays, connecting lugs, head tube and the fork were always left as natural aluminum. I did hand polish my frame, but there are still some nicks and scratches that I couldn't get out from the previous owner (my late best friend). For me, those add to the bike's character, and will always remind me of my friend.
@fishwatcher--Nice bike! I love the light blue color! What frame size is yours, a 54cm? Mine is a 52cm.
@eastbay71--LOL, yeah, the drivetrain components are an interesting mix. The freewheel is a SunTour Winner Pro, so maybe it should be called a Shimtourolo?
@exmechanic89--Yeah, after riding a steel bike (Reynolds 531 tubing) for so many years, I'm also curious as to how the Vitus will feel? I have heard many people love the way they ride, but they're better suited to lightweight riders, like myself. I weigh 143, so I'm hoping there won't be much flex? I'll let you know--I'm taking the bike out for its first ride, tomorrow!
#16
Senior Member
Join Date: May 2015
Location: Richmond VA area
Posts: 2,618
Bikes: '00 Koga Miyata Full Pro Oval Road bike.
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 475 Post(s)
Likes: 0
Liked 8 Times
in
7 Posts
Yeah definitely post your first impressions of the frame after your ride. I had always heard those frames were best for lighter riders, too.
#17
Death fork? Naaaah!!
I knew they offered silver ano but I'd never seen one in the flesh.
I've never noticed much flex, but mine is twitchy on fast descents. Still one of my faves, though:
Top
Top
I've never noticed much flex, but mine is twitchy on fast descents. Still one of my faves, though:
Top
Top
__________________
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
#20
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,677
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,753 Times
in
940 Posts
Beautiful bicycle and well done Areion!
I have a soft spot for both the Vitus and the ALAN bicycles. At 240lb, both were too flexible for me to ride with any degree of confidence. Now, at 182lb, I wish I had kept one or the other.
I have a soft spot for both the Vitus and the ALAN bicycles. At 240lb, both were too flexible for me to ride with any degree of confidence. Now, at 182lb, I wish I had kept one or the other.
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
#22
Road Rider
Thread Starter
Join Date: Apr 2016
Location: Vermont, USA
Posts: 33
Bikes: Refurbished 1986 Vitus 979, 1978 Holdsworth, 1976 Fuji, 2012 Breezer Lightning Pro MTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Sure--to get the appropriate distance between the saddle and the handlebars, place your elbow so it just touches the nose of the saddle horn. With your fingers fully extended toward the bar, the centerline of the handlebar (perpendicular to the bike frame) should be about an inch beyond your middle finger. Some people go as far as 2", but that is too much for me. It's an old rule, which I think I originally found in Eugene Sloane's book, The New Complete Book of Bicycling. I have the 1970's edition, so it's not so new anymore.
#23
Senior Member
Join Date: Apr 2014
Location: Minneapols, Minnesota
Posts: 538
Bikes: 89 Raleigh Technium PRE, 92 SP 1000 ti, '09 Team Pro, 72 International, 63 Hercules 3-spd, '81 Vitus 979, 2 Kabuki Submariners, 2 C. Itoh Submariners, Gary Fisher Big Sur, Skyway 3-spd, Robin Hood w/ S-A IGH 5 speed.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Tres Belle! I have a 81 anodized in red waiting for it's close-up on my work bench. I bought it off Ebay and it is in excellent original condition with just a few tiny nicks in he decals. I have all period Campy Nuovo record for it with excpetion of newer Campy skeloton style dual pivot brakes and a Sugino maxy crankset. Planning on white saddle/barwrap.
#24
Road Rider
Thread Starter
Join Date: Apr 2016
Location: Vermont, USA
Posts: 33
Bikes: Refurbished 1986 Vitus 979, 1978 Holdsworth, 1976 Fuji, 2012 Breezer Lightning Pro MTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Nice bike, top506! I have never seen one in purple before!
#25
Senior Member
Join Date: Dec 2007
Location: Holland
Posts: 952
Bikes: 2007 Nagasawa with C-Record, 1992 Duell with Croce D'aune/Chorus, three Gazelles, M5 recumbent
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Likes: 0
Liked 25 Times
in
15 Posts
Very nice. I always liked the Vitus aluminium and carbonfiber bikes. Unfortunately they are to small for me, they were made up to 61 cm and I need at least 64cm.