In praise of gugie
02-26-23, 11:01 PM
#26
Senior Member
Join Date: May 2019
Location: Burien WA
Posts: 527
Bikes: Cannondale Synapse, LeMond Victoire, Bianchi Campione d'Italia, Kona Hei Hei, Ritchey Ultra, Schwinn "Paramount" PDG, '83 Trek 640
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 273 Post(s)
Liked 339 Times
in
218 Posts
Well, if that's what we're up to:
This is a 1987 Bianchi Campione d'Italia that I bought new from Wheel and Heel in Fishkill, NY. It sat in my parents' basement for a few decades until I heard about Eroica California, which brought me to the C&V world. After some basic repairs to get it ready for its first run, I decided that I wanted to be able to run 700c x 32mm tires in the next edition.
Mark dimpled the chainstays and raised the brake bridge. I'd found a Waterford fork with a box crown and more tire clearance; Mark re-raked the fork so that it would end up with the same trail. And traded the rear brake cable routing from guides along the top tube to slotted cable stops. 32mm tires fit with the pads just at the bottom of "standard" (short reach) brake calipers. Now I can ride the bike as shown 95% of the year but in an hour's work swap out the handlebars and brakes, pedals, and seatpost and saddle and be ready for Eroica's guidelines. It's a better bike today than when I first bought it, thanks to his work.
This is a 1987 Bianchi Campione d'Italia that I bought new from Wheel and Heel in Fishkill, NY. It sat in my parents' basement for a few decades until I heard about Eroica California, which brought me to the C&V world. After some basic repairs to get it ready for its first run, I decided that I wanted to be able to run 700c x 32mm tires in the next edition.
Mark dimpled the chainstays and raised the brake bridge. I'd found a Waterford fork with a box crown and more tire clearance; Mark re-raked the fork so that it would end up with the same trail. And traded the rear brake cable routing from guides along the top tube to slotted cable stops. 32mm tires fit with the pads just at the bottom of "standard" (short reach) brake calipers. Now I can ride the bike as shown 95% of the year but in an hour's work swap out the handlebars and brakes, pedals, and seatpost and saddle and be ready for Eroica's guidelines. It's a better bike today than when I first bought it, thanks to his work.
Likes For mhespenheide:
02-27-23, 05:27 AM
#27
Senior Member
Join Date: Jun 2021
Posts: 1,705
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 765 Post(s)
Liked 1,620 Times
in
772 Posts
mhespenheide , that is a gorgeous color- do you know what it/the paint is*? It looks very close to (what I think are) the remnants of the original paint on a Holdsworth Pro frame I'm trying to decide how to finish. ( Drillium Dude 's bare/matte Casati is an interesting option, too.....)
*also curious about your brake levers..
*also curious about your brake levers..
Last edited by ehcoplex; 02-27-23 at 05:58 AM.
Likes For ehcoplex:
02-27-23, 01:08 PM
#28
Senior Member
Join Date: May 2019
Location: Burien WA
Posts: 527
Bikes: Cannondale Synapse, LeMond Victoire, Bianchi Campione d'Italia, Kona Hei Hei, Ritchey Ultra, Schwinn "Paramount" PDG, '83 Trek 640
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 273 Post(s)
Liked 339 Times
in
218 Posts
mhespenheide , that is a gorgeous color- do you know what it/the paint is*? It looks very close to (what I think are) the remnants of the original paint on a Holdsworth Pro frame I'm trying to decide how to finish. ( Drillium Dude 's bare/matte Casati is an interesting option, too.....)
*also curious about your brake levers..
*also curious about your brake levers..
The brake levers are the Tektro RL340. Pretty standard and not expensive. They're nice, though. They have a good (larger and more sculpted) shape if you're used to modern brake/shift levers, and they come with a Campagnolo-style quick-release button built in that help you open up the calipers even farther to get around fat tires.
Likes For mhespenheide:
02-27-23, 02:09 PM
#29
Senior Member
Join Date: Jun 2021
Posts: 1,705
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 765 Post(s)
Liked 1,620 Times
in
772 Posts
Thanks! That's a powdercoat by Groody Brothers, RAL 6027. "Celeste" is always a hard color to pin down. This might not be the most accurate version of it, but I like the added blue hue compared to some other versions, so I'm happy with it.
The brake levers are the Tektro RL340. Pretty standard and not expensive. They're nice, though. They have a good (larger and more sculpted) shape if you're used to modern brake/shift levers, and they come with a Campagnolo-style quick-release button built in that help you open up the calipers even farther to get around fat tires.
The brake levers are the Tektro RL340. Pretty standard and not expensive. They're nice, though. They have a good (larger and more sculpted) shape if you're used to modern brake/shift levers, and they come with a Campagnolo-style quick-release button built in that help you open up the calipers even farther to get around fat tires.
Thought maybe they were the Tektro levers, but couldn't tell for sure. I've got a pair on my Trek, & I like 'em, but with the gum hoods they have a different look. The Campy levers on my Holdsworth don't do my hands any favors & I've been wondering how the black hooded Tektros would look- you've provided a data point in favor!
02-28-23, 06:36 PM
#30
ambulatory senior
Thread Starter
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,001
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1957 Post(s)
Liked 3,669 Times
in
1,683 Posts
Did a 30 mile shake down today and the campy seatpost is awesome for getting just the right angle. Also 42s rock on gravel shoulders. Raid brakes are killer, not withstanding the blood curdling scream the rear one does. I may adjust that out but I might not. It makes cars stop right now! The only thing wrong with my bike is the rider is out of shape.
Coffee break
Trail bench
Friends house
Front porch of horrors.
Coffee break
Trail bench
Friends house
Front porch of horrors.
02-28-23, 06:45 PM
#31
Senior Member
Join Date: Jun 2021
Posts: 1,705
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 765 Post(s)
Liked 1,620 Times
in
772 Posts
Did a 30 mile shake down today and the campy seatpost is awesome for getting just the right angle. Also 42s rock on gravel shoulders. Raid brakes are killer, not withstanding the blood curdling scream the rear one does. I may adjust that out but I might not. It makes cars stop right now! The only thing wrong with my bike is the rider is out of shape.
02-28-23, 06:48 PM
#32
ambulatory senior
Thread Starter
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,001
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1957 Post(s)
Liked 3,669 Times
in
1,683 Posts
The front is fine but you need to definitely unload your torque. The rear is really good. On today's ride I never needed the granny. 44-36 is pretty darn low.
Likes For 52telecaster:
02-28-23, 06:56 PM
#33
Senior Member
Join Date: Jun 2021
Posts: 1,705
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 765 Post(s)
Liked 1,620 Times
in
772 Posts
02-28-23, 07:15 PM
#34
ambulatory senior
Thread Starter
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,001
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1957 Post(s)
Liked 3,669 Times
in
1,683 Posts
26. My feeling is if I'm going to need a bailout I want it very low. With freewheels I usually go half-step and granny but with seven gears out back I can get things close enough for my taste and the last two cogs 28-36 aren't any bigger of a jump than a sturmey archer aw hub. If I can live with it there, I can live with it here.
Likes For 52telecaster:
02-28-23, 07:22 PM
#35
Full Member
Join Date: Oct 2020
Location: Portland, Oregon
Posts: 244
Bikes: Bakers dozen is the limit!
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 89 Post(s)
Liked 449 Times
in
142 Posts
New fork and rack for the travel Bilenky. Recent, completed December 2022. Very trick work on what started as an ugly duckling paper weight of a fork crown.
Likes For VRJAKE:
02-28-23, 07:28 PM
#36
ambulatory senior
Thread Starter
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,001
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1957 Post(s)
Liked 3,669 Times
in
1,683 Posts
02-28-23, 08:00 PM
#37
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,004
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2517 Post(s)
Liked 3,295 Times
in
2,068 Posts
Did a 30 mile shake down today and the campy seatpost is awesome for getting just the right angle. Also 42s rock on gravel shoulders. Raid brakes are killer, not withstanding the blood curdling scream the rear one does. I may adjust that out but I might not. It makes cars stop right now! The only thing wrong with my bike is the rider is out of shape.
Coffee break
Trail bench
Friends house
Front porch of horrors.
Coffee break
Trail bench
Friends house
Front porch of horrors.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
Likes For jdawginsc:
02-28-23, 09:36 PM
#38
Banned.
Join Date: Jul 2009
Location: PAZ
Posts: 12,294
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2588 Post(s)
Liked 4,827 Times
in
1,709 Posts
You know, I'm being half-serious here, but I saw a pair of crankarms while perusing Ebay last night which would almost mirror that slight curvature of your seatpost:
Strip the anodizing, give them a brushed finish, et voila: instant conversation starter!
Just in case you might be interested: https://www.ebay.com/itm/185719843059?hash=item2b3dc3e8f3:g
wwAAOSwPLFjJB8c&amdata=enc%3AAQAHAAAAsBra8SYaM5DsRztufYsxIHFKIx2 1Up6qg%2BSNOrftW4LgTxEtucTRefLGvX5fSujKxUD3R32uGkMSFxHRrDdD0P69yUXN8Ub3LodcLefeWjD%2F8YlqnOlCiIeNeSt ajHU%2FYDg2xj%2B8hZCpTiYCDFB%2BjZ4oIJeNNN9VFV0VRl6DfTIJFsFM5NF0argoiFeGy1OfNnuQ%2Fxk9Kgci5Mwj82U894V Ab5V9GutUSByEaFaHaPBz%7Ctkp%3ABk9SR4zVzbPTYQ
DD
Strip the anodizing, give them a brushed finish, et voila: instant conversation starter!
Just in case you might be interested: https://www.ebay.com/itm/185719843059?hash=item2b3dc3e8f3:g
wwAAOSwPLFjJB8c&amdata=enc%3AAQAHAAAAsBra8SYaM5DsRztufYsxIHFKIx2 1Up6qg%2BSNOrftW4LgTxEtucTRefLGvX5fSujKxUD3R32uGkMSFxHRrDdD0P69yUXN8Ub3LodcLefeWjD%2F8YlqnOlCiIeNeSt ajHU%2FYDg2xj%2B8hZCpTiYCDFB%2BjZ4oIJeNNN9VFV0VRl6DfTIJFsFM5NF0argoiFeGy1OfNnuQ%2Fxk9Kgci5Mwj82U894V Ab5V9GutUSByEaFaHaPBz%7Ctkp%3ABk9SR4zVzbPTYQDD
Likes For Drillium Dude:
02-28-23, 09:39 PM
#39
ambulatory senior
Thread Starter
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,001
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1957 Post(s)
Liked 3,669 Times
in
1,683 Posts
You know, I'm being half-serious here, but I saw a pair of crankarms while perusing Ebay last night which would almost mirror that slight curvature of your seatpost:
Strip the anodizing, give them a brushed finish, et voila: instant conversation starter!
Just in case you might be interested: https://www.ebay.com/itm/185719843059?hash=item2b3dc3e8f3:gwwAAOSwPLFjJB8c&amdata=enc%3AAQAHAAAAsBra8SYaM5DsRztufYsxIHFKIx2 1Up6qg%2BSNOrftW4LgTxEtucTRefLGvX5fSujKxUD3R32uGkMSFxHRrDdD0P69yUXN8Ub3LodcLefeWjD%2F8YlqnOlCiIeNeSt ajHU%2FYDg2xj%2B8hZCpTiYCDFB%2BjZ4oIJeNNN9VFV0VRl6DfTIJFsFM5NF0argoiFeGy1OfNnuQ%2Fxk9Kgci5Mwj82U894V Ab5V9GutUSByEaFaHaPBz%7Ctkp%3ABk9SR4zVzbPTYQ
DD
Strip the anodizing, give them a brushed finish, et voila: instant conversation starter!
Just in case you might be interested: https://www.ebay.com/itm/185719843059?hash=item2b3dc3e8f3:g
wwAAOSwPLFjJB8c&amdata=enc%3AAQAHAAAAsBra8SYaM5DsRztufYsxIHFKIx2 1Up6qg%2BSNOrftW4LgTxEtucTRefLGvX5fSujKxUD3R32uGkMSFxHRrDdD0P69yUXN8Ub3LodcLefeWjD%2F8YlqnOlCiIeNeSt ajHU%2FYDg2xj%2B8hZCpTiYCDFB%2BjZ4oIJeNNN9VFV0VRl6DfTIJFsFM5NF0argoiFeGy1OfNnuQ%2Fxk9Kgci5Mwj82U894V Ab5V9GutUSByEaFaHaPBz%7Ctkp%3ABk9SR4zVzbPTYQDD
02-28-23, 11:33 PM
#40
Senior Member
Join Date: May 2019
Location: Burien WA
Posts: 527
Bikes: Cannondale Synapse, LeMond Victoire, Bianchi Campione d'Italia, Kona Hei Hei, Ritchey Ultra, Schwinn "Paramount" PDG, '83 Trek 640
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 273 Post(s)
Liked 339 Times
in
218 Posts
And I'm picky about liking the (obscure!) 177.5mm crank arms that are on there, with the bonus that they're 110mm BCD. Thanks for the thought, though!
Likes For mhespenheide:
03-01-23, 06:30 AM
#41
ambulatory senior
Thread Starter
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,001
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1957 Post(s)
Liked 3,669 Times
in
1,683 Posts
Btw, I stopped at my local bike shop yesterday during the ride and an old roadie checked out my gugiefied Austro Daimler. He said, "it looks like a rivendell." I thought you should know what sort of trouble we are getting into.
Likes For 52telecaster:
03-01-23, 07:59 AM
#42
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,755
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2162 Post(s)
Liked 3,478 Times
in
1,220 Posts
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
Likes For rccardr:
03-01-23, 09:57 AM
#43
Senior Member
Join Date: Dec 2005
Posts: 17,195
Mentioned: 482 Post(s)
Tagged: 0 Thread(s)
Quoted: 3824 Post(s)
Liked 6,786 Times
in
2,637 Posts
Well, here's what Rivendells look like these days:
Not my kind of aesthetic.
Not my kind of aesthetic.
Likes For nlerner:
Likes For Kilroy1988:
Likes For panzerwagon:
03-01-23, 11:24 AM
#46
Senior Member
Join Date: Dec 2014
Location: Central Virginia
Posts: 4,793
Bikes: Numerous
Mentioned: 150 Post(s)
Tagged: 0 Thread(s)
Quoted: 1678 Post(s)
Liked 3,148 Times
in
924 Posts
They nailed the Bianchi Celeste though ...
__________________
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
Likes For Spaghetti Legs:
03-01-23, 12:38 PM
#47
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,667
Bikes: It's complicated.
Mentioned: 1303 Post(s)
Tagged: 0 Thread(s)
Quoted: 4699 Post(s)
Liked 5,857 Times
in
2,305 Posts
Gugie sez,
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
03-01-23, 12:41 PM
#48
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,004
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2517 Post(s)
Liked 3,295 Times
in
2,068 Posts
You know, I'm being half-serious here, but I saw a pair of crankarms while perusing Ebay last night which would almost mirror that slight curvature of your seatpost:
Strip the anodizing, give them a brushed finish, et voila: instant conversation starter!
Just in case you might be interested: https://www.ebay.com/itm/185719843059?hash=item2b3dc3e8f3:gwwAAOSwPLFjJB8c&amdata=enc%3AAQAHAAAAsBra8SYaM5DsRztufYsxIHFKIx2 1Up6qg%2BSNOrftW4LgTxEtucTRefLGvX5fSujKxUD3R32uGkMSFxHRrDdD0P69yUXN8Ub3LodcLefeWjD%2F8YlqnOlCiIeNeSt ajHU%2FYDg2xj%2B8hZCpTiYCDFB%2BjZ4oIJeNNN9VFV0VRl6DfTIJFsFM5NF0argoiFeGy1OfNnuQ%2Fxk9Kgci5Mwj82U894V Ab5V9GutUSByEaFaHaPBz%7Ctkp%3ABk9SR4zVzbPTYQ
DD
Strip the anodizing, give them a brushed finish, et voila: instant conversation starter!
Just in case you might be interested: https://www.ebay.com/itm/185719843059?hash=item2b3dc3e8f3:g
wwAAOSwPLFjJB8c&amdata=enc%3AAQAHAAAAsBra8SYaM5DsRztufYsxIHFKIx2 1Up6qg%2BSNOrftW4LgTxEtucTRefLGvX5fSujKxUD3R32uGkMSFxHRrDdD0P69yUXN8Ub3LodcLefeWjD%2F8YlqnOlCiIeNeSt ajHU%2FYDg2xj%2B8hZCpTiYCDFB%2BjZ4oIJeNNN9VFV0VRl6DfTIJFsFM5NF0argoiFeGy1OfNnuQ%2Fxk9Kgci5Mwj82U894V Ab5V9GutUSByEaFaHaPBz%7Ctkp%3ABk9SR4zVzbPTYQDD
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
Likes For jdawginsc:
03-01-23, 12:48 PM
#49
Malcontent
Join Date: May 2018
Location: Milwaukee
Posts: 132
Bikes: I honestly don't know...
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 81 Post(s)
Liked 98 Times
in
46 Posts
Since this appears to have become a 'Share Your Gugificazione' thread, I'll make a small contribution.
Mark added a second set of bottle cage bosses on the seat tube, filled in the internal brake cable guide holes on the top tube and added external guides (note they're offset to 11 o'clock). He also filled in the holes for the internally-routed gear cables, adding external gear lever bosses and a pair of Campy guides on top of the shell as well as a diver's helmet stop on the chainstay for good measure:
After the torch-work, he took the frame and fork to be media blasted, resulting a beautiful, even matte finish. I wanted to keep that look, so clear-coated the frame with matte Krylon clear.
In this close-up, you can see the clean brazing around the edges of the Campy guide, and just make out the plugged hole the FD cable used to emerge from in the original, internally routed configuration:
Of course it carries the 'Seal of Approval'; note the exclamation point is absent - the tiny dent wouldn't allow it to lay flat and stay stuck. Oh, well:
Apres-Cino, 2021 - exactly the type of ride I had in mind when pitching my vision to Mark:
The bike currently resides in his garage, patiently awaiting the next Cino. Fingers crossed, that will be July of this year; it'll be nice to get reacquainted with this bike - and get a gander at how the patina is developing!
DD
Mark added a second set of bottle cage bosses on the seat tube, filled in the internal brake cable guide holes on the top tube and added external guides (note they're offset to 11 o'clock). He also filled in the holes for the internally-routed gear cables, adding external gear lever bosses and a pair of Campy guides on top of the shell as well as a diver's helmet stop on the chainstay for good measure:
After the torch-work, he took the frame and fork to be media blasted, resulting a beautiful, even matte finish. I wanted to keep that look, so clear-coated the frame with matte Krylon clear.
In this close-up, you can see the clean brazing around the edges of the Campy guide, and just make out the plugged hole the FD cable used to emerge from in the original, internally routed configuration:
Of course it carries the 'Seal of Approval'; note the exclamation point is absent - the tiny dent wouldn't allow it to lay flat and stay stuck. Oh, well:
Apres-Cino, 2021 - exactly the type of ride I had in mind when pitching my vision to Mark:
The bike currently resides in his garage, patiently awaiting the next Cino. Fingers crossed, that will be July of this year; it'll be nice to get reacquainted with this bike - and get a gander at how the patina is developing!
DD
03-01-23, 01:00 PM
#50
ambulatory senior
Thread Starter
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,001
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1957 Post(s)
Liked 3,669 Times
in
1,683 Posts