74 Professional - tubular tire recommendations
#1
Full Member
Thread Starter
Join Date: Jul 2018
Location: Greenville, SC / Asheville, NC
Posts: 290
Bikes: '74 Raleigh Professional, '73 Raleigh Grand Prix, '84 Nishiki Medalist, '85 Gazelle Champion Mondial AB, '81 Peugeot Course, '79 Univega Gran Rally, '85 Torpado Super Strada
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 67 Post(s)
Likes: 0
Liked 10 Times
in
10 Posts
74 Professional - tubular tire recommendations
I picked up this beauty yesterday. 1974 Raleigh Professional, mix bag of campy components and cinelli stem/bars.
The original owner built it over a few years after buying the frame from a shop he worked at in the early 80s. Apparently the frame was ordered and the guy never showed to pick it up and it sat in the back of the shop for a few years. Some components were shipped from Italy while he was studying abroad in college. Really nice guy, very cool story.
But I digress. The tires need replacement and this is my first time dealing with tubulars. I typically stay away, but the original wheel sets are too good to swap out and I’d like to expand my knowledge as well.
So, any favorites out there? Tips or suggestions? I’m all ears. Thanks
The original owner built it over a few years after buying the frame from a shop he worked at in the early 80s. Apparently the frame was ordered and the guy never showed to pick it up and it sat in the back of the shop for a few years. Some components were shipped from Italy while he was studying abroad in college. Really nice guy, very cool story.
But I digress. The tires need replacement and this is my first time dealing with tubulars. I typically stay away, but the original wheel sets are too good to swap out and I’d like to expand my knowledge as well.
So, any favorites out there? Tips or suggestions? I’m all ears. Thanks
Last edited by Raleigh74; 10-22-18 at 06:46 PM.
#2
Senior Member
Join Date: Mar 2012
Location: Niagara Region, Canada
Posts: 1,458
Bikes: 1970s Alex Singer, 1960s Peugeot PX 10, 1960s Bertin C37, 1973 Carre Bertin C 37, 1972 Carlton Kermesse, 1981 Peugeot PX 14 Super Competition
Mentioned: 65 Post(s)
Tagged: 0 Thread(s)
Quoted: 348 Post(s)
Liked 268 Times
in
158 Posts
Raleigh74-
Death brake blocks! The fronts are backwards and would shoot out of the pad holders under braking.(Beautiful bike, by the way.)
Death brake blocks! The fronts are backwards and would shoot out of the pad holders under braking.(Beautiful bike, by the way.)
#3
Full Member
Thread Starter
Join Date: Jul 2018
Location: Greenville, SC / Asheville, NC
Posts: 290
Bikes: '74 Raleigh Professional, '73 Raleigh Grand Prix, '84 Nishiki Medalist, '85 Gazelle Champion Mondial AB, '81 Peugeot Course, '79 Univega Gran Rally, '85 Torpado Super Strada
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 67 Post(s)
Likes: 0
Liked 10 Times
in
10 Posts
#4
Senior Member
Join Date: Nov 2015
Posts: 4,515
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 1650 Post(s)
Likes: 0
Liked 850 Times
in
553 Posts
If you can swing the cost of Vittoria Corsa G tubulars, they are one of the best riding tubs out there right now. The big plus is they come in skinwall which is getting harder and harder to find on tubs.
At around 80 bucks a tire, they are not cheap but not crazy expensive either. If you think you might want to just try tubs out and cannot yet decide to commit to them, you can start out with entry level tires like Vittoria Rallies or Continental Giros. Just examine the closely if you can before you buy them for good tread alignment and minimum lumpiness at the base tape at the valve area.
Don't bother with NOS tubs from decades ago, if you plan to really ride the bike. Just not worth the risk and cost...
At around 80 bucks a tire, they are not cheap but not crazy expensive either. If you think you might want to just try tubs out and cannot yet decide to commit to them, you can start out with entry level tires like Vittoria Rallies or Continental Giros. Just examine the closely if you can before you buy them for good tread alignment and minimum lumpiness at the base tape at the valve area.
Don't bother with NOS tubs from decades ago, if you plan to really ride the bike. Just not worth the risk and cost...
#5
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,730
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1967 Post(s)
Liked 2,059 Times
in
1,129 Posts
Very pretty bike. I'm a recent convert and began 7 years ago with Gatorskins knowing they are comparatively harsh but more durable. They are a bear to mount and the nicer Competitions are even harder to mount. I've heard that other makes are easier to stretch onto the rim but I am a Continental fan boy. Whatever you get, get two plus a spare and make sure they have removable valve cores so you can use sealant if you go,that route. A cool bike like that deserves cool tires. And the coolest tires are tubulars. Stick with it. Don't let the others dissuade you.
#6
If I own it, I ride it
Join Date: Nov 2005
Location: Cardinal Country
Posts: 5,585
Bikes: Lejeune(14), Raleigh, Raysport, Jan De Reus, Gazelle, Masi, B. Carré(4), Springfield, Greg Lemond, Andre Bertin, Schwinn Paramount
Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 593 Post(s)
Likes: 0
Liked 663 Times
in
312 Posts
In order of preference: FMB Roubaix, Veloflex Roubaix or Vlaanderen, Vittoria Corsa G. Judicious shopping will get you any of these for around $80 a tire, but the FMBs will require more patience. IMO FMBs are worth the wait or paying a bit more. Once you buy any of those, put them on a rim, pump them up, and park them in a dark corner of your basement for aging. Check pressure about every three days as they will go down. While letting the good stuff age, go buy some lesser tires to ride in the mean time. After about six months (Winter is comng) mount the good stuff for the spring.
#7
Senior Member
Join Date: Oct 2014
Location: GWN
Posts: 2,538
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 1858 Post(s)
Liked 606 Times
in
403 Posts
In order of preference: FMB Roubaix, Veloflex Roubaix or Vlaanderen, Vittoria Corsa G. Judicious shopping will get you any of these for around $80 a tire, but the FMBs will require more patience. IMO FMBs are worth the wait or paying a bit more. Once you buy any of those, put them on a rim, pump them up, and park them in a dark corner of your basement for aging. Check pressure about every three days as they will go down. While letting the good stuff age, go buy some lesser tires to ride in the mean time. After about six months (Winter is comng) mount the good stuff for the spring.
Just watch their sales and get on their mailing list. Quite often they offer 12% off coupons.
#9
Bad example
Join Date: Nov 2015
Location: Seattle and Reims
Posts: 3,195
Bikes: Peugeot: AO-8 1973, PA-10 1971, PR-10 1973, Sante 1988; Masi Gran Criterium 1975, Stevenson Tourer 1980, Stevenson Criterium 1981, Schwinn Paramount 1972, Rodriguez 2006, Gitane Federal ~1975, Holdsworth Pro, Follis 172 ~1973, Bianchi '62
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 867 Post(s)
Liked 341 Times
in
162 Posts
I also am a great fan of wide Vittoria tubulars, but I want to get FMBs for my next set. Whatever you get, look for 27-28 mm width. The ride is amazing.
__________________
Keeping Seattle’s bike shops in business since 1978
Keeping Seattle’s bike shops in business since 1978
#10
Full Member
Thread Starter
Join Date: Jul 2018
Location: Greenville, SC / Asheville, NC
Posts: 290
Bikes: '74 Raleigh Professional, '73 Raleigh Grand Prix, '84 Nishiki Medalist, '85 Gazelle Champion Mondial AB, '81 Peugeot Course, '79 Univega Gran Rally, '85 Torpado Super Strada
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 67 Post(s)
Likes: 0
Liked 10 Times
in
10 Posts
Thanks for the suggestions guys! $119 for a pair of Vittorias seems like it may be my best bet right now.
#11
Junior Member
Join Date: Aug 2017
Location: Atlanta
Posts: 130
Bikes: '87 Centurion Ironman Expert, '88 Basso Loto, '89 Panasonic MC-5500, '92 Vitus 992
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 60 Post(s)
Likes: 0
Liked 10 Times
in
8 Posts
Here's the cheap route and the one I chose to get started with tubulars:
wiggle.com | Vittoria Rally Tubular Tyre | Tires
wiggle.com | Vittoria Rally Tubular Tyre | Tires
#12
Senior Member
Join Date: Oct 2014
Location: GWN
Posts: 2,538
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 1858 Post(s)
Liked 606 Times
in
403 Posts
Here's the cheap route and the one I chose to get started with tubulars:
wiggle.com | Vittoria Rally Tubular Tyre | Tires
wiggle.com | Vittoria Rally Tubular Tyre | Tires
#13
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,498
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1836 Post(s)
Liked 3,433 Times
in
1,596 Posts
sweet bike!
I've got a copper International and a Raleigh Team in team colors, and still have the urge to pick up a Pro in the blue mink & silver paint scheme... <sigh>. Raleigh's marketing was certainly effective in my case!
as far as tubulars go, I've got some Conti Sprinters on my Olmo. Nice tires, well made, durable, but not especially thrilling. Not so fond of the black sidewalls either. I think I need to try some that Lynn suggested.
slightly jealous Steve in Peoria
(who's got a 24 1/2" Pro that needs a new home??)
I've got a copper International and a Raleigh Team in team colors, and still have the urge to pick up a Pro in the blue mink & silver paint scheme... <sigh>. Raleigh's marketing was certainly effective in my case!
as far as tubulars go, I've got some Conti Sprinters on my Olmo. Nice tires, well made, durable, but not especially thrilling. Not so fond of the black sidewalls either. I think I need to try some that Lynn suggested.
slightly jealous Steve in Peoria
(who's got a 24 1/2" Pro that needs a new home??)
#14
Senior Member
Join Date: Apr 2005
Location: Wherever
Posts: 16,748
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 556 Post(s)
Likes: 0
Liked 133 Times
in
79 Posts
In order of preference: FMB Roubaix, Veloflex Roubaix or Vlaanderen, Vittoria Corsa G. Judicious shopping will get you any of these for around $80 a tire, but the FMBs will require more patience. IMO FMBs are worth the wait or paying a bit more. Once you buy any of those, put them on a rim, pump them up, and park them in a dark corner of your basement for aging. Check pressure about every three days as they will go down. While letting the good stuff age, go buy some lesser tires to ride in the mean time. After about six months (Winter is comng) mount the good stuff for the spring.
Beautiful bike, R-74.
#16
Senior Member
Those of you running 27-29mm tubs, what pressure do you like? I have a pair of Challenge PR on a bike (I know these get mixed reviews but I have been OK with them) and they say 95-135 psi. I generally go around 90.
#17
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,911
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 107 Post(s)
Tagged: 0 Thread(s)
Quoted: 2364 Post(s)
Liked 2,887 Times
in
1,574 Posts
If you can swing the cost of Vittoria Corsa G tubulars, they are one of the best riding tubs out there right now. The big plus is they come in skinwall which is getting harder and harder to find on tubs.
At around 80 bucks a tire, they are not cheap but not crazy expensive either. If you think you might want to just try tubs out and cannot yet decide to commit to them, you can start out with entry level tires like Vittoria Rallies or Continental Giros. Just examine the closely if you can before you buy them for good tread alignment and minimum lumpiness at the base tape at the valve area.
Don't bother with NOS tubs from decades ago, if you plan to really ride the bike. Just not worth the risk and cost...
At around 80 bucks a tire, they are not cheap but not crazy expensive either. If you think you might want to just try tubs out and cannot yet decide to commit to them, you can start out with entry level tires like Vittoria Rallies or Continental Giros. Just examine the closely if you can before you buy them for good tread alignment and minimum lumpiness at the base tape at the valve area.
Don't bother with NOS tubs from decades ago, if you plan to really ride the bike. Just not worth the risk and cost...
this is a uk shop....i have had good experiences with other Uk shops and just ordered the corsa g clinchers from probike kit (~83 for a pair with latex tubes)
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
#18
Senior Member
Join Date: Oct 2014
Location: GWN
Posts: 2,538
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 1858 Post(s)
Liked 606 Times
in
403 Posts
Actually for me that link is showing the 28’s as even a couple dollars less than the 25’s.
Those of you running 27-29mm tubs, what pressure do you like? I have a pair of Challenge PR on a bike (I know these get mixed reviews but I have been OK with them) and they say 95-135 psi. I generally go around 90.
I run them at 90 rear and 80 front. I am 6'1" at about 225lbs.
#19
Senior Member
Join Date: Oct 2013
Location: Great White North
Posts: 929
Bikes: I have a few
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 340 Post(s)
Liked 216 Times
in
105 Posts
#20
Senior Member
Join Date: Oct 2005
Location: SW Ohio
Posts: 3,694
Bikes: Puch Marco Polo, Saint Tropez, Masi Gran Criterium
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1172 Post(s)
Liked 445 Times
in
318 Posts
I’ll just put it out there for fans of the Continental Grand Prix 4000 clincher - these come in a tubular version as well. Yes they are black wall. The tread pattern is the same Grand Prix 4000 that many of us love. They cost about 70-80$ each on sale. They lay flat and should be hump free due to not being sewn. The tire is more of a lamination and the cotton base tape lays copletely flat ala TUFO. I like this concept myself and wonder why this particular model isn’t mentioned much.
#21
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,592
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1617 Post(s)
Liked 2,225 Times
in
1,110 Posts
I don't have the tubular version but the clincher version of the Vittoria Corsa G Graphene is heaven to ride. I have both 23 and 25's. Haven't tried the 25's yet. My next sew up set will be theses.
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
#23
Senior Member
Has anyone ever used Challenge tubulars?
#24
~>~
Those are Super Champion Arc en Ciel tubulars in the OP's pics, far better than the OEM wheels and later production.
Any modern Vittoria or Continental tubular tires will be far better tires than the Clement 50's that many MKIV Pros were shod with OEM back when.
OP: A very nice/very tall MKIV in excellent nick w/ good non-OEM build spec including a 54T chain ring.
As John Howard once said after winning the US National RR Championships (again) on a MKIV: " 52T chain rings don't cut it".
-Bandera
#25
Senior Member
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,083
Mentioned: 201 Post(s)
Tagged: 0 Thread(s)
Quoted: 3026 Post(s)
Liked 3,903 Times
in
1,426 Posts
In order of preference: FMB Roubaix, Veloflex Roubaix or Vlaanderen, Vittoria Corsa G. Judicious shopping will get you any of these for around $80 a tire, but the FMBs will require more patience. IMO FMBs are worth the wait or paying a bit more. Once you buy any of those, put them on a rim, pump them up, and park them in a dark corner of your basement for aging. Check pressure about every three days as they will go down. While letting the good stuff age, go buy some lesser tires to ride in the mean time. After about six months (Winter is comng) mount the good stuff for the spring.
On top of that, if you are looking for some fat tubulars, 32-34mm, I highly recommend the Dugast Pipistrello. The file tread pattern is not ideal for the road, but it's not bad either.