obrentharris 

I'm looking for all the following items for a new build.

7-speed freewheel, with 28 or 30 large cog.
28-hole tubular rims (new or very lightly used)
Challenge Tubular tires - Strada Bianca or Paris Roubaix (new or very lightly used)

I have the following items to trade

Phil Wood 27" wheel set (mis-matched rims)
Chorus 10 crankset
Campy Record crank bolts and washers
Campy Record dropout adjusters (new)
Campy chainring bolts
Campy Record front derr. (both with and without lip)
Campy Record downtube shifters (both clip-on and braze-on)
Campy Record french headset
Campy Record 8 speed rear derailleur (missing barrel adjuster)
Universal LR-1 brake lever set (new)
Shimano 600 tricolor front derr. 28.6 (FD 6401)
Shimano XT front derr. 34.9 (FD M737)
Shimano 8-speed hyperglide cassette - New (HG50-8)
Suntour Superbe Pro front derr. for braze-on fitment
Clement XPLOR MSO 700 x 40 tire (ridden 65 miles)

Some of the items I want are more valuable than some of the items I'm offering but I'm sure I can come up with a way to make up the difference.
Thanks,
Brent

unworthy1

I found the pair that did not sell at the Alameda swap (another pair did) and these have the "modern" logo and are marked "64-38" and "Giro D'Italia" and have scratches but nothing is damaged. Measured to be 26.4 by my calipers...I'd offer you pix but the ones I took with my cellphone are locked in limbo-land cause my phone is acting up today. Maybe it needs a bath in the Bay!

eschlwc

B^) the bike is from '84, so they sound perf.

pm sent.

Last ride 76 

Actually it's headed back towards Campy. That's how it came, 8 speed titanium group, now on a Chesini Innovation.

Henry III

Looking for a set(4) of good chrome mounting bolts for a pair of Universal 61 centerpulls and one cable hanger.

Midtown

Hey Gang,

A neighbor of mine asked me this morning if I knew anyone selling a nice road bike.
He's in his early 50's, 5"7" with a medium build and recently retired from the military.
I was hoping you could help me find this gentleman a C&V bike.
Anyone in the Twin Cities area who has, or knows of someone selling a nice road bike please let me know.

Thank you,
T.

scozim 

ISO:

Nutted, mid reach brakes - up to 57mm in length - Diacompe, Weinmann, Suntour, Shimano (not real picky)
Helicomatic 6 spd freewheel - ideally with a 24 large ring but a 13-21 would suffice also


Have:

Short reach:
Sach New Success brakes - need recessed nuts
Suntour Edge brakes - need recessed nuts
Braze on Suntour Superbe front derailleur
Shimano 600 rainbow (6400) rear derailleur - a little scuffed



ISO:
Sugino 170mm Super Mighty left side crank arm

Have:
Sugino 170m Mighty Tour left side crank arm

velofinds

ISO a nice lugged steel 52-54cm frameset (frame, fork, plus any extras like BB, headset, and stem). My wish list:

- Italian or Belgian - think De Rosa, Pinarello, Merckx, etc., or possibly a steel LOOK
- High-end Columbus tubing - think SLX, TSX, MAX, EL, etc. or Reynolds equivalent (i.e., 753, 631). Would consider SL. Would not consider Cromor, Aelle, Gara, Tretubi, etc.
- Internal brake cable routing
- Short of a fully-chromed bike (it is possible to have too much of a good thing!), chrome trim is great - think fork, rear triangle, lugs, dropouts, and so forth.
- Clearance for at least 25mm tires (which shouldn't be a problem I think), though up to 27-28mm would be even better.

Looking forward to seeing what you have

cyclotoine

Want:

Shimano 600 EX non-drive 170mm crank arm
Shimano 600 tricolour non-drive 172.5mm crank arm

Have:

Shimano 600 EX 170mm drive side crank arm and rings if wanted
Shimano 600 tricolour 172.5 mm drive side crank arm.

Want to make a set or I'll be forced to throw there in the metal recycling.

bwilli88 

Want 1 1/8 alloy quill stem with a rise but only 60mm long, would look like the following pictures.

This one is stuck but I really like the look and want to just hack it out but only if I can find a replacement just like it. The welded stem just does not have the same beefy look.

seedsbelize 

ISO: Brooks C 15, color unimportant
Have Brooks C 17, slate. Lightly used.

I'll be in the USA July 10 - 16

Dimmerswitch

ISO decent(metal) clamp on front derailleur and claw rd for an old 10 speed

The simplex set on my fiance's bike finally gave up.


Not much to barter with as I am just getting really into bikes.
Have a set of steel 27x1 1/4 wheels with high flange hubs, dimpled
And a brand new shimano hg 41 MTB cassette 11-28


I'm in West Michigan

noglider 

@Dimmerswitch I have lots of garden variety stuff such as a SunTour V which would work fine. Email me at the address below.

mountaindave 

Noooooooo!!!!! Somewhere, somebody needs these crank arms! Also post in the orphan parts spreadsheet!

icepick_trotsky 

I have an 8 speed 11-32 Shimano cassette I'd like to trade for an 8 speed 11-28 or so cassette. Mine has about 1500 miles on it, and still going strong, so used is fine.

Anyone want lower gears? I don't!

Miele Man

ISO Dura Ace AX FRONT hub & 7 spd 105 Downtube shifters

twolve

ISO lots of random stuff. Most of it to build something similar to my bike that was recently stolen or other projects.
650B wheelset, 5, 6 or 7 speed.
Nitto stem
Nitto promenade bars.
Dia come brake levers that will work on swept back bars.
Suntour Cyclone GT rear derailleur
Sugino AT 170 or 172.5mm crankset. No chainrings needed.

Have lots:
Shimano 600 tricolor brake calipers and levers, crankset (172.5mm), front braze on derailleur, shifters (for 7 speed rear).
700c velocity aerohead laced to tricolor hubs.
Brooks B17 new, but with a scuff on back.
Very short reach nitto technomic stem, about 60mm I'd say.
Nitto rando bars, almost new.
7 speed ultegra rear derailleur
170mm SR Apex triple crankset
Deore 660 rear and front derailleur
Lots of other random stuff as well!

Thanks!

scozim 

ISO: cable mounting bolt with bracket for Shimano 600 Arabesque brakes. First two show the hole where the missing part is and the last is what it looks like on the other brake that I have.





Part that is needed:

obrentharris 

Wanted
Adjusting barrel for Campy Record 8 speed rear der. (The threads are smaller diameter than the later Campy der's.)
Low gear limiting screw for same derailleur.

Have
Campy Record crank bolts and washers
Campy Record dropout adjusters (new)
Campy chainring bolts

Brent

Barrel adjuster found. Limiting screw still needed.

Narhay

Wanted: Campagnolo Nuovo Record nutted brake calipers in good to excellent condition. Normal reach (mid 40s to mid 50s mm reach). Condition of pads not important as I will be getting a new set. No rust.

Spaghetti Legs 

Have 2 Chorus and 1 Record in English thread. the Chorus are the aluminum body and the Record is carbon body. All in pretty good shape.

icepick_trotsky 

I have the same request as @Spaghetti Legs if two turn up. I can trade a Chorus BSA threaded BB. I would do Miche or some other ISO taper make as well.

icepick_trotsky 

What do you mean by 7 speed ultegra, @twolve?

twolve

Pardon my ignorance with all things index, but it's a RD 6500 and it is currently indexing with 7 speed cassette and a trip-color. After a google search, this should be a 9 speed derailleur?

icepick_trotsky 

Gotcha. I wasn't sure if it was 6200, 6400 (both labeled 600) or a later Ultegra labeled RD. That one was originally 9 speed, but most Shimano indexes exactly the same 6 through 10 speed.