The Trek 760 Appreciation Thread (770 and 170 included)
#101
Senior Member
Thread Starter
Join Date: Jul 2004
Location: northern michigan
Posts: 13,317
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Liked 595 Times
in
313 Posts
The full 531c is a unique feel. Smooth as silk, it is quick, silent and responsive. I like to ride my 760 after a hard and fast ride on my cannondale criterium series. It's like coming home, kicking off the work boots for a pair of slippers.
#102
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1609 Post(s)
Liked 2,216 Times
in
1,103 Posts
Update on fork. Picked it up. the frame was in an accident so the TT and DT were damaged. The owner couldn't see that the fork was bent too until I pointed it out to him. So the bend is not readily noticed to the untrained eye. I believe I can bend it back into alignment. I am not concerned about the cold working of the material and I think the risk is worth the effort due to the difficulty of find a fork for this bike. Worse case scenario would be to order tubes and rebuild the fork. The crown is the real differentiator! It has Campagnolo DO's
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
#104
Senior Member
Thread Starter
Join Date: Jul 2004
Location: northern michigan
Posts: 13,317
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Liked 595 Times
in
313 Posts
Update on fork. Picked it up. the frame was in an accident so the TT and DT were damaged. The owner couldn't see that the fork was bent too until I pointed it out to him. So the bend is not readily noticed to the untrained eye. I believe I can bend it back into alignment. I am not concerned about the cold working of the material and I think the risk is worth the effort due to the difficulty of find a fork for this bike. Worse case scenario would be to order tubes and rebuild the fork. The crown is the real differentiator! It has Campagnolo DO's
#105
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1609 Post(s)
Liked 2,216 Times
in
1,103 Posts
I have a friend that builds his own frames that is not far away. He won't build for others but he might help me with the fork. He recently started building his own forks instead of purchasing them. He is a picture trying to capture the extend of the "bent" condition. Depth of field is not big enough but I think you can see the condition. There were a few cracks in the paint so I "chipped" them out to se if there was any cracks in the steel. None.
[IMG]WP_20150430_008 by superissimo_83, on Flickr[/IMG]
the crack in the paint was between the longer edges in this next picture. Obviously nothing is there.
[IMG]WP_20150430_002 by superissimo_83, on Flickr[/IMG]
[IMG]WP_20150430_008 by superissimo_83, on Flickr[/IMG]
the crack in the paint was between the longer edges in this next picture. Obviously nothing is there.
[IMG]WP_20150430_002 by superissimo_83, on Flickr[/IMG]
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
#106
Senior Member
Join Date: Sep 2013
Location: Chicago
Posts: 1,082
Bikes: '72 Peugeot PX-10 '78 Motobecane Le Champion '83 Motobecane Grand Jubile '85 Trek 830 '88 Merckx Team ADR Corsa Extra
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 471 Post(s)
Liked 1,214 Times
in
651 Posts
If you havent had it on the road and you dont mind a few wrench sessions then why not.
The full 531c is a unique feel. Smooth as silk, it is quick, silent and responsive. I like to ride my 760 after a hard and fast ride on my cannondale criterium series. It's like coming home, kicking off the work boots for a pair of slippers.
The full 531c is a unique feel. Smooth as silk, it is quick, silent and responsive. I like to ride my 760 after a hard and fast ride on my cannondale criterium series. It's like coming home, kicking off the work boots for a pair of slippers.
#109
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1609 Post(s)
Liked 2,216 Times
in
1,103 Posts
Update on the bent 760 fork here at the bottom of the page. How I did it.
From this:
[IMG]WP_20150430_008 on Flickr[/IMG]
To this:
[IMG]P1020998 on Flickr[/IMG]
From this:
[IMG]WP_20150430_008 on Flickr[/IMG]
To this:
[IMG]P1020998 on Flickr[/IMG]
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
Last edited by SJX426; 05-28-15 at 12:26 PM.
#110
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,649
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,704 Times
in
937 Posts
Congratulations and I hope it works rightly!
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#111
Señor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,942
Bikes: Mostly English - predominantly Raleighs
Mentioned: 71 Post(s)
Tagged: 0 Thread(s)
Quoted: 1494 Post(s)
Liked 1,099 Times
in
644 Posts
Had one. Got it nicely painted. Rode it. It was just a bit too small, so I sold it. Thread here.
__________________
In search of what to search for.
In search of what to search for.
#112
Senior Member
Thread Starter
Join Date: Jul 2004
Location: northern michigan
Posts: 13,317
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Liked 595 Times
in
313 Posts
Had one. Got it nicely painted. Rode it. It was just a bit too small, so I sold it. Thread here.
#113
Junior Member
Upthywazzoo,
That is gorgeous x1000. Do you by chance have the info on that color green? I have a beaujolais 760 and have been toying with the idea of going green.
Thanks!
That is gorgeous x1000. Do you by chance have the info on that color green? I have a beaujolais 760 and have been toying with the idea of going green.
Thanks!
#114
Senior Member
Last edited by upthywazzoo; 05-12-15 at 08:52 AM.
#115
Senior Member
Join Date: Dec 2001
Location: n.w. superdrome
Posts: 17,687
Bikes: 1 trek, serotta, rih, de Reus, Pogliaghi and finally a Zieleman! and got a DeRosa
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Likes: 0
Liked 9 Times
in
9 Posts
Got my 770 for $25 a few years back, half the paint stripped, rust on the seat stays and generally in poor condition.
Decided since it was an open book to do a 'custom' paint scheme. I spent a few days in the paint booth and came up with
this combo. Decals are from VeloCals and are outstanding, I think I'm going to order the rest of the set and give up the minimalist look.
I also need to find a headbadge and post more recent pic's this one is at least 5 years old.
Decided since it was an open book to do a 'custom' paint scheme. I spent a few days in the paint booth and came up with
this combo. Decals are from VeloCals and are outstanding, I think I'm going to order the rest of the set and give up the minimalist look.
I also need to find a headbadge and post more recent pic's this one is at least 5 years old.
__________________
Sono più lento di quel che sembra.
Odio la gente, tutti.
Want to upgrade your membership? Click Here.
Sono più lento di quel che sembra.
Odio la gente, tutti.
Want to upgrade your membership? Click Here.
#116
Senior Member
Thread Starter
Join Date: Jul 2004
Location: northern michigan
Posts: 13,317
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Liked 595 Times
in
313 Posts
Got my 770 for $25 a few years back, half the paint stripped, rust on the seat stays and generally in poor condition.
Decided since it was an open book to do a 'custom' paint scheme. I spent a few days in the paint booth and came up with
this combo. Decals are from VeloCals and are outstanding, I think I'm going to order the rest of the set and give up the minimalist look.
I also need to find a headbadge and post more recent pic's this one is at least 5 years old.
Decided since it was an open book to do a 'custom' paint scheme. I spent a few days in the paint booth and came up with
this combo. Decals are from VeloCals and are outstanding, I think I'm going to order the rest of the set and give up the minimalist look.
I also need to find a headbadge and post more recent pic's this one is at least 5 years old.
#117
Senior Member
Thread Starter
Join Date: Jul 2004
Location: northern michigan
Posts: 13,317
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Liked 595 Times
in
313 Posts
Tonight I rode my 16mi personal TT route and decided to leave the Cdale Crit home. Instead, I put the ride accessories on the 760. Ended up with a fast ride. Anytime I can ride that course under an hour is a good trip. Done deal. That was the first time I've taken it on a timed course (with hills) and I must say, it's an impressive bike.
#118
CL Addict
Join Date: Oct 2007
Location: Evanston, IL
Posts: 1,067
Bikes: '50s Leon Cattrysse - late 50s Raleigh Lenton Sports - 1960/61 Raleigh Lenton Grand Prix - '72 Canadian Tire Company Supercycle - '74 Raleigh International - '83 Nishiki Cresta - '84 Centurion Turbo - '86 v. Herwerden (Chesini) - '87 Specialized Sirr
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked 96 Times
in
59 Posts
770 finished:
__________________
#120
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1609 Post(s)
Liked 2,216 Times
in
1,103 Posts
Update on post #109 fork.
Talked to a friend who builds his own bikes. He is on #4 and used all Richard Sachs lugs and tubing. He built a jig to validate and copy fork off-sets. He allowed me to borrow it and now I have a 760 fork that is off set correctly and looks to be completely aligned.
The jig is a 1x1 squared tube with an QR axle set up at one end for mounting the DO's. Two side plates are mounted for the steerer to nestle in and then in side are two set screwed for the steerer to sit on. The way it works is simple. The distance from the center of the "axle to the top of the tubing is .5 inches. The rest of the off set is adjusted by the set screws. Two are used to insure the steerer is parallel to the tubing.
[IMG]Fork Jig 5, on Flickr[/IMG]
[IMG]Fork Jig 4 wfork, on Flickr[/IMG]
[IMG]Fork Jig 3 wfork, on Flickr[/IMG]
Talked to a friend who builds his own bikes. He is on #4 and used all Richard Sachs lugs and tubing. He built a jig to validate and copy fork off-sets. He allowed me to borrow it and now I have a 760 fork that is off set correctly and looks to be completely aligned.
The jig is a 1x1 squared tube with an QR axle set up at one end for mounting the DO's. Two side plates are mounted for the steerer to nestle in and then in side are two set screwed for the steerer to sit on. The way it works is simple. The distance from the center of the "axle to the top of the tubing is .5 inches. The rest of the off set is adjusted by the set screws. Two are used to insure the steerer is parallel to the tubing.
[IMG]Fork Jig 5, on Flickr[/IMG]
[IMG]Fork Jig 4 wfork, on Flickr[/IMG]
[IMG]Fork Jig 3 wfork, on Flickr[/IMG]
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
Last edited by SJX426; 08-03-15 at 04:44 AM.
#121
Senior Member
Thread Starter
Join Date: Jul 2004
Location: northern michigan
Posts: 13,317
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Liked 595 Times
in
313 Posts
Update on post #109 fork.
Talked to a friend who builds his own bikes. He is on #4 and used all Richard Sachs lugs and tubing. He built a jig to validate and copy fork off-sets. He allowed me to borrow it and now I have a 760 fork that is off set correctly and looks to be completely aligned.
The jig is a 1x1 squared tube with an QR axle set up at one end for mounting the DO's. Two side plates are mounted for the steerer to nestle in and then in side are two set screwed for the steerer to sit on. The way it works is simple. The distance from the center of the "axle to the top of the tubing is .5 inches. The rest of the off set is adjusted by the set screws. Two are used to insure the steerer is parallel to the tubing.
[IMG]Fork Jig 5, on Flickr[/IMG]
[IMG]Fork Jig 4 wfork, on Flickr[/IMG]
[IMG]Fork Jig 3 wfork, on Flickr[/IMG]
Talked to a friend who builds his own bikes. He is on #4 and used all Richard Sachs lugs and tubing. He built a jig to validate and copy fork off-sets. He allowed me to borrow it and now I have a 760 fork that is off set correctly and looks to be completely aligned.
The jig is a 1x1 squared tube with an QR axle set up at one end for mounting the DO's. Two side plates are mounted for the steerer to nestle in and then in side are two set screwed for the steerer to sit on. The way it works is simple. The distance from the center of the "axle to the top of the tubing is .5 inches. The rest of the off set is adjusted by the set screws. Two are used to insure the steerer is parallel to the tubing.
[IMG]Fork Jig 5, on Flickr[/IMG]
[IMG]Fork Jig 4 wfork, on Flickr[/IMG]
[IMG]Fork Jig 3 wfork, on Flickr[/IMG]
#122
Senior Member
Thread Starter
Join Date: Jul 2004
Location: northern michigan
Posts: 13,317
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Liked 595 Times
in
313 Posts
So, I have this idea. Since buying this bike exactly a year ago, I've toyed with the idea of running a tubular wheelset on this bike. Now that I have such a set on the Colnago, this will be the next move to try that idea. If I like it, then it will be a future upgrade.
#123
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1609 Post(s)
Liked 2,216 Times
in
1,103 Posts
Do it! I have not built the 760 yet. I actually borrowed the headset to use on a Masi Gran Corsa to see if I like the ride of the frame set (which is for sale). I heard good things about it that I need to find out for myself. Wrong thread for this, but it has a 7speed 105 group on it now with tubulars, GL330's and Mavic 501 hubs, 32 hole, IRD 7speed freewheel.
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
#124
Senior Member
Thread Starter
Join Date: Jul 2004
Location: northern michigan
Posts: 13,317
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Liked 595 Times
in
313 Posts
Do it! I have not built the 760 yet. I actually borrowed the headset to use on a Masi Gran Corsa to see if I like the ride of the frame set (which is for sale). I heard good things about it that I need to find out for myself. Wrong thread for this, but it has a 7speed 105 group on it now with tubulars, GL330's and Mavic 501 hubs, 32 hole, IRD 7speed freewheel.
#125
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1609 Post(s)
Liked 2,216 Times
in
1,103 Posts
Since I am going with Superbe Pro for the Trek, I should start looking for a headset and leave the Masi alone.
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.