custom titanium stems from China
#1
Senior Member
Thread Starter
Join Date: Oct 2005
Location: SW Ohio
Posts: 3,692
Bikes: Puch Marco Polo, Saint Tropez, Masi Gran Criterium
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1169 Post(s)
Liked 444 Times
in
317 Posts
custom titanium stems from China
Not sure if any classic and vintage bike rebuilders have considered this or not but I am intrigued at the idea of running a titanium stem on several of my 1990's/early 2000's era aluminum roadbike builds I'm working on. One of them the Klein Quantum has a 1" straight steerer and I have outfitted this with a really nifty ti aheadset type stem that accepts 31.8 bars. This part was less than $100 and really looks great with a matching ti seatpost.
The custom one I just ordered is for a Cannondale Six13 that I am working on. It will have Deda Trentacinque 35.0 bars so I need the titanium builder to do the custom option. They say they are willing to do it for me and the price is $135. If the quality of the finished product is anything like what I got in the 1" aheadset stem, I'm gonna be stoked.
The custom one I just ordered is for a Cannondale Six13 that I am working on. It will have Deda Trentacinque 35.0 bars so I need the titanium builder to do the custom option. They say they are willing to do it for me and the price is $135. If the quality of the finished product is anything like what I got in the 1" aheadset stem, I'm gonna be stoked.
#2
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,834 Times
in
1,998 Posts
No images of the one in hand?
#3
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,157
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 269 Post(s)
Tagged: 0 Thread(s)
Quoted: 4540 Post(s)
Liked 6,467 Times
in
3,717 Posts
Not sure if any classic and vintage bike rebuilders have considered this or not but I am intrigued at the idea of running a titanium stem on several of my 1990's/early 2000's era aluminum roadbike builds I'm working on. One of them the Klein Quantum has a 1" straight steerer and I have outfitted this with a really nifty ti aheadset type stem that accepts 31.8 bars. This part was less than $100 and really looks great with a matching ti seatpost.
The custom one I just ordered is for a Cannondale Six13 that I am working on. It will have Deda Trentacinque 35.0 bars so I need the titanium builder to do the custom option. They say they are willing to do it for me and the price is $135. If the quality of the finished product is anything like what I got in the 1" aheadset stem, I'm gonna be stoked.
The custom one I just ordered is for a Cannondale Six13 that I am working on. It will have Deda Trentacinque 35.0 bars so I need the titanium builder to do the custom option. They say they are willing to do it for me and the price is $135. If the quality of the finished product is anything like what I got in the 1" aheadset stem, I'm gonna be stoked.
#4
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,917
Bikes: Too many to list here check my signature.
Mentioned: 194 Post(s)
Tagged: 2 Thread(s)
Quoted: 2954 Post(s)
Liked 2,987 Times
in
1,522 Posts
They are made from old Chengdu J-7 parts
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
Likes For Bianchigirll:
Likes For masi61:
#6
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,534
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2432 Post(s)
Liked 4,439 Times
in
2,104 Posts
Likes For cudak888:
#7
Senior Member
Join Date: Dec 2014
Location: Central Virginia
Posts: 4,793
Bikes: Numerous
Mentioned: 150 Post(s)
Tagged: 0 Thread(s)
Quoted: 1678 Post(s)
Liked 3,148 Times
in
924 Posts
I’m pretty sure Waltly Ti bikes are made in China and people tend to be really happy with them. Right now, due to high demand , wait times for a custom frame are “3-4 months” .
https://www.waltlytitanium.com
https://www.waltlytitanium.com
__________________
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
#8
Senior Member
Join Date: Mar 2021
Location: Beaverton, OR
Posts: 1,448
Bikes: You had me at rusty and Italian!!
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 573 Post(s)
Liked 1,065 Times
in
554 Posts
I have never been on AliExpress because I thought it was cheap knockoff stuff. Now I’m intrigued and I suspect it could become quite a rabbit hole.
#9
It's MY mountain
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 10,005
Bikes: Klein, Merckx, Trek
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 4355 Post(s)
Liked 3,020 Times
in
1,637 Posts
I have zero doubt there are Chinese craftspeople who can weld Ti with the best of them... but Chinese businesses tend to go with the cheapest thing they can get away with... labor, materials, quality control, and overhead... so you just have to be more diligent.
Likes For DiabloScott:
#10
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,534
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2432 Post(s)
Liked 4,439 Times
in
2,104 Posts
As I say this, I can't help but think of the gorgeous Velo Orange Gran Cru stem. It's not crap. IIRC, it's either from China or Taiwan.
Granted, there's no guarantee that by cutting out the middleman you're getting a decent product, but only experience from other customers will bear out exactly what you are getting for $135.
-Kurt
Last edited by cudak888; 01-23-22 at 08:58 PM.
Likes For cudak888:
#11
Senior Member
Join Date: Dec 2005
Posts: 17,195
Mentioned: 482 Post(s)
Tagged: 0 Thread(s)
Quoted: 3824 Post(s)
Liked 6,786 Times
in
2,637 Posts
Likes For nlerner:
#12
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,534
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2432 Post(s)
Liked 4,439 Times
in
2,104 Posts
I found this VERY high-quality, anodized aluminum handlebar there. I couldn't find a pattern like this offered anywhere else from anyone, name brand or otherwise.
AliExpress is also where this 1X MTB Hollowtech II crankset came from. Couldn't find anything quite like it from stateside sellers.
-Kurt
AliExpress is also where this 1X MTB Hollowtech II crankset came from. Couldn't find anything quite like it from stateside sellers.
-Kurt
Likes For RustyJames:
#14
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,534
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2432 Post(s)
Liked 4,439 Times
in
2,104 Posts
Yet, the OP gave us next to no information, so this conversation is half guesswork. They could be ordering a Taiwanese-made, custom TI stem through a Chinese dealer, for all we know.
IMHO, the OP's post has so little to converse upon without a picture that this thread was destined to devolve into something completely ambiguous and not particularly grounded in the first place.
-Kurt
Last edited by cudak888; 01-23-22 at 09:06 PM.
#15
Senior Member
Join Date: May 2019
Location: Burien WA
Posts: 527
Bikes: Cannondale Synapse, LeMond Victoire, Bianchi Campione d'Italia, Kona Hei Hei, Ritchey Ultra, Schwinn "Paramount" PDG, '83 Trek 640
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 273 Post(s)
Liked 339 Times
in
218 Posts
I'm not the OP, but I can offer this example, from J&L Titanium via eBay. Not quite the level of welding and finish that I'd look for from, say, Moots or Ibis, but it's darn fine.
Similar in design to the Velo-Orange "tall stack" stem. This one is made for a threadless 1" steerer tube and 31.8mm handlebars. Slated for an upcoming build this spring. Or summer...
Similar in design to the Velo-Orange "tall stack" stem. This one is made for a threadless 1" steerer tube and 31.8mm handlebars. Slated for an upcoming build this spring. Or summer...
Likes For masi61:
#17
Senior Member
Thread Starter
Join Date: Oct 2005
Location: SW Ohio
Posts: 3,692
Bikes: Puch Marco Polo, Saint Tropez, Masi Gran Criterium
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1169 Post(s)
Liked 444 Times
in
317 Posts
mhespenheide - I think this is the same stem I have here. Hopefully the single bolt is sufficient to keep the headset bearings at the correct pre-tension level. The fact that these were made for 1” steerers is nice (I have a second one in reserve for a future project).
I will post photos of the custom one for the 35.0 bars when I get it. Hopefully the 35.0 bar clamp in titanium won’t be so garishly large as to detract….
cudak888 - my apologies for being speculative… I will occasionally sneak in a quick post from work (during a moment of downtime only) to spark my own anticipation of fun things to come. I am an RN working 12 hour shifts and also recovering from COVID. BTW: on the Klein pictured, I realize that I will need to cut the fork down although the temporary protuberance on top of the stem doesn’t look horrible. The knurled spacers top and bottom I think accentuate the quality look of the titanium stem. Velo Orange sold them a few years ago but I can’t find them any more. If anyone knows of a vendor still selling these knurled (faceted) spacers, please share the vendor name…
I will post photos of the custom one for the 35.0 bars when I get it. Hopefully the 35.0 bar clamp in titanium won’t be so garishly large as to detract….
cudak888 - my apologies for being speculative… I will occasionally sneak in a quick post from work (during a moment of downtime only) to spark my own anticipation of fun things to come. I am an RN working 12 hour shifts and also recovering from COVID. BTW: on the Klein pictured, I realize that I will need to cut the fork down although the temporary protuberance on top of the stem doesn’t look horrible. The knurled spacers top and bottom I think accentuate the quality look of the titanium stem. Velo Orange sold them a few years ago but I can’t find them any more. If anyone knows of a vendor still selling these knurled (faceted) spacers, please share the vendor name…
#18
Senior Member
Join Date: Jun 2012
Location: Stillwater, OK
Posts: 7,829
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 1873 Post(s)
Liked 693 Times
in
469 Posts
Hmm, a Ti stem on a Six13, I'm having a hard time picturing it. Which Six13 are you working on specifically? (I really miss my Six13 )
__________________
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
#19
Senior Member
Join Date: Jul 2018
Posts: 617
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 170 Post(s)
Likes: 0
Liked 258 Times
in
149 Posts
As a general statement, I wouldn't have a problem with something coming out of Taiwan, the level of craftsmanship there is quite high. I get all my basic consumable parts from a Taiwan supplier and have not been disappointed yet. I've also racked up thousands of miles on my Bianchi S9, a ti frame apparently welded in Taiwan.
#20
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,053
Bikes: Yes, please.
Mentioned: 283 Post(s)
Tagged: 0 Thread(s)
Quoted: 2217 Post(s)
Liked 4,739 Times
in
1,801 Posts
Ah! The Fishbed! If I ever become a member of the C&V section of Planeforums.net, it'll be because I bought one of those.
Likes For non-fixie:
#21
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,534
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2432 Post(s)
Liked 4,439 Times
in
2,104 Posts
cudak888 - my apologies for being speculative… I will occasionally sneak in a quick post from work (during a moment of downtime only) to spark my own anticipation of fun things to come. I am an RN working 12 hour shifts and also recovering from COVID.
-Kurt
Likes For cudak888:
#22
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,834 Times
in
1,998 Posts
I found this VERY high-quality, anodized aluminum handlebar there. I couldn't find a pattern like this offered anywhere else from anyone, name brand or otherwise.
AliExpress is also where this 1X MTB Hollowtech II crankset came from. Couldn't find anything quite like it from stateside sellers.
-Kurt
AliExpress is also where this 1X MTB Hollowtech II crankset came from. Couldn't find anything quite like it from stateside sellers.
-Kurt
#23
Senior Member
Join Date: Aug 2009
Posts: 2,461
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1602 Post(s)
Liked 1,785 Times
in
1,003 Posts
I would be interested if they made quill stems.
#24
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,534
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2432 Post(s)
Liked 4,439 Times
in
2,104 Posts
#25
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,834 Times
in
1,998 Posts