Vincitore! Vincitore! Cena di Pollo!
11-20-22, 12:51 AM
#1
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,856
Bikes: Yes
Mentioned: 532 Post(s)
Tagged: 0 Thread(s)
Quoted: 3300 Post(s)
Liked 4,088 Times
in
1,512 Posts
Vincitore! Vincitore! Cena di Pollo!
Just when I think I've got the N+1 thing under control, I'm innocently browsing the Craigslist bike parts section and I come across a couple of vintage frames in my size, both with classic champagne paint. A few texts and emails later, I brought them both home.
I'll start with the one that gave me the title for this thread -- a 1971 Mercian Vincitore. I had never given Mercian bikes much thought before. I see them on here now and then and they're always beautiful, but I could say that about an endless list of bike brands. Mercian wasn't on my short list. But I have a particular weakness for either chrome lugs or particularly ornate lugs, and this one had lugs that were both chrome and ornate. I had to have it.
The paint is rough, but that's actually a characteristic I like in old frames. It means I can send it off to @gugie for some Gugificazione without worrying about the finish. I'm not sure how far I'll go with this one, but it needs at least water bottle bosses. As for paint, I'm thinking British racing green with a white head tube and seat panel.
But wait, there's more! I mentioned two frames, right? Well, brace yourself for this next one...
That's right, a Huffy Aerowind. The seller wasn't going to be home when I could come by, so he left it on the porch along with a jar for me to put my money in. Even within Portland city limits, this bike wasn't taken after being left out on the porch like that, can you believe it? I guess no one who wandered by was aware of its value...
Well, this one doesn't have the original parts, so it comes up a couple a few 9's short of that value, but at least one person obviously thinks highly of these.
Plus it has a brazed-on kickstand plate!
I'll start with the one that gave me the title for this thread -- a 1971 Mercian Vincitore. I had never given Mercian bikes much thought before. I see them on here now and then and they're always beautiful, but I could say that about an endless list of bike brands. Mercian wasn't on my short list. But I have a particular weakness for either chrome lugs or particularly ornate lugs, and this one had lugs that were both chrome and ornate. I had to have it.
The paint is rough, but that's actually a characteristic I like in old frames. It means I can send it off to @gugie for some Gugificazione without worrying about the finish. I'm not sure how far I'll go with this one, but it needs at least water bottle bosses. As for paint, I'm thinking British racing green with a white head tube and seat panel.
But wait, there's more! I mentioned two frames, right? Well, brace yourself for this next one...
That's right, a Huffy Aerowind. The seller wasn't going to be home when I could come by, so he left it on the porch along with a jar for me to put my money in. Even within Portland city limits, this bike wasn't taken after being left out on the porch like that, can you believe it? I guess no one who wandered by was aware of its value...
Well, this one doesn't have the original parts, so it comes up a couple a few 9's short of that value, but at least one person obviously thinks highly of these.
Plus it has a brazed-on kickstand plate!
__________________
My Bikes
My Bikes
Last edited by Andy_K; 11-20-22 at 01:17 AM.
Likes For Andy_K:
11-20-22, 01:29 AM
#2
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,262
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 272 Post(s)
Tagged: 0 Thread(s)
Quoted: 4577 Post(s)
Liked 6,567 Times
in
3,770 Posts
Just when I think I've got the N+1 thing under control, I'm innocently browsing the Craigslist bike parts section and I come across a couple of vintage frames in my size, both with classic champagne paint. A few texts and emails later, I brought them both home.
I'll start with the one that gave me the title for this thread -- a 1971 Mercian Vincitore. I had never given Mercian bikes much thought before. I see them on here now and then and they're always beautiful, but I could say that about an endless list of bike brands. Mercian wasn't on my short list. But I have a particular weakness for either chrome lugs or particularly ornate lugs, and this one had lugs that were both chrome and ornate. I had to have it.
The paint is rough, but that's actually a characteristic I like in old frames. It means I can send it off to @gugie for some Gugificazione without worrying about the finish. I'm not sure how far I'll go with this one, but it needs at least water bottle bosses. As for paint, I'm thinking British racing green with a white head tube and seat panel.
I'll start with the one that gave me the title for this thread -- a 1971 Mercian Vincitore. I had never given Mercian bikes much thought before. I see them on here now and then and they're always beautiful, but I could say that about an endless list of bike brands. Mercian wasn't on my short list. But I have a particular weakness for either chrome lugs or particularly ornate lugs, and this one had lugs that were both chrome and ornate. I had to have it.
The paint is rough, but that's actually a characteristic I like in old frames. It means I can send it off to @gugie for some Gugificazione without worrying about the finish. I'm not sure how far I'll go with this one, but it needs at least water bottle bosses. As for paint, I'm thinking British racing green with a white head tube and seat panel.
WOW!!!H**Y CRAP those lugs are awesome.
Great call on the BRG paint, no brainer IMO.
Last edited by merziac; 11-20-22 at 01:33 AM.
Likes For merziac:
11-20-22, 01:41 AM
#3
Senior Member
Join Date: Aug 2017
Location: Minneapolis
Posts: 948
Bikes: 1968 Raleigh Super Course, 1972 Raleigh Professional, 1975 Raleigh International, 1978 Raleigh Professional, 1985 Raleigh Prestige, 1972 Schwinn Paramount, 1980 Schwinn Voyageur 11.8, 1960 Carlton Franco Suisse Peugeot PX10, 1972 Motobecane Le Champ
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 326 Post(s)
Liked 697 Times
in
355 Posts
I don’t think anybody could have n+1 under control when looking at a Mercian like that, it’s gorgeous! Not even seeing that seeing that Huffy next to it ruins it for me.
Likes For Pcampeau:
11-20-22, 01:54 AM
#5
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,262
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 272 Post(s)
Tagged: 0 Thread(s)
Quoted: 4577 Post(s)
Liked 6,567 Times
in
3,770 Posts
Likes For merziac:
11-20-22, 01:54 AM
#6
Senior Member
Join Date: May 2013
Location: Pacific Northwest
Posts: 1,994
Bikes: ‘87 Marinoni SLX Sports Tourer, ‘79 Miyata 912 by Gugificazione
Mentioned: 166 Post(s)
Tagged: 0 Thread(s)
Quoted: 504 Post(s)
Liked 471 Times
in
260 Posts
There are SO many things about that Huffy Aerowind that truly had me LOL! 😂
Can’t wait to see that one decked out in your usual Campy 10x3, maybe on an inverted Soma Hwy One bar. It really needs an aero seatpost. Do they come that small? Then add a mattress saddle to “match” the kickstand and its plate, not to mention that oh-so-artful rear brake “bridge” with its integral fender mount. Don’t forget those hooked washers on your front axle for safe retention.
(But that Mercian truly does have lovely lugs. It will be a beautiful bike when you’re done.)
Can’t wait to see that one decked out in your usual Campy 10x3, maybe on an inverted Soma Hwy One bar. It really needs an aero seatpost. Do they come that small? Then add a mattress saddle to “match” the kickstand and its plate, not to mention that oh-so-artful rear brake “bridge” with its integral fender mount. Don’t forget those hooked washers on your front axle for safe retention.
(But that Mercian truly does have lovely lugs. It will be a beautiful bike when you’re done.)
Likes For Dfrost:
11-20-22, 02:23 AM
#7
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,856
Bikes: Yes
Mentioned: 532 Post(s)
Tagged: 0 Thread(s)
Quoted: 3300 Post(s)
Liked 4,088 Times
in
1,512 Posts
Seriously, this thing weighs over 12 pounds as pictured. I don't know how they got there. I had my wife hold each of these. She asked if one had hollow tubes and the other was solid.
__________________
My Bikes
My Bikes
Likes For Andy_K:
11-20-22, 02:57 AM
#8
ambulatory senior
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,003
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 3,681 Times
in
1,685 Posts
That Mercian rocks. So glad you got it!
Likes For 52telecaster:
11-20-22, 03:48 AM
#9
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,490
Mentioned: 419 Post(s)
Tagged: 1 Thread(s)
Quoted: 3885 Post(s)
Liked 3,502 Times
in
2,276 Posts
-----
here is a Rebour rendering done for Andy Bertin illustrating the Vincitore's BOCAMA semi-sloper -
-----
here is a Rebour rendering done for Andy Bertin illustrating the Vincitore's BOCAMA semi-sloper -
-----
11-20-22, 06:16 AM
#10
Senior Member
Join Date: Mar 2021
Location: Beaverton, OR
Posts: 1,470
Bikes: You had me at rusty and Italian!!
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 580 Post(s)
Liked 1,091 Times
in
567 Posts
I’ve seen that Huffy kicking around CL for awhile so it’s great it found a loving home.
The Mercian would be hard to say no to. Fancy chrome lugs make my bits tingle too. I’m sure it’s gonna look fabulous when it’s done!
The Mercian would be hard to say no to. Fancy chrome lugs make my bits tingle too. I’m sure it’s gonna look fabulous when it’s done!
Likes For RustyJames:
11-20-22, 06:26 AM
#11
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 28,007
Bikes: Too many to list here check my signature.
Mentioned: 194 Post(s)
Tagged: 2 Thread(s)
Quoted: 2978 Post(s)
Liked 3,091 Times
in
1,575 Posts
“ Just when I think I've got the N+1 thing under control, I'm innocently browsing the Craigslist bike parts section and I “
isn’t that sort of like a recovering alcoholic dropping by to chat with his favorite bartender?
The Mercian is fabulous, love those lugs
isn’t that sort of like a recovering alcoholic dropping by to chat with his favorite bartender?
The Mercian is fabulous, love those lugs
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
Likes For Bianchigirll:
11-20-22, 08:48 AM
#13
Senior Member
Join Date: Aug 2007
Location: California
Posts: 985
Bikes: '87 Serotta Colorado,'96 Moots VaMoots, Bertoni MAX, Eddy Merckx Grand Prix Team USA
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 171 Post(s)
Liked 348 Times
in
149 Posts
Would love to GCN put that Aerowind up against the latest aero super bike in a side by side comparison. I'm guessing the results would be surprising...
Nice score Andy.
Nice score Andy.
Likes For velomateo:
11-20-22, 09:37 AM
#14
Senior Member
Join Date: Aug 2013
Posts: 2,321
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 767 Post(s)
Liked 1,898 Times
in
889 Posts
So, 3x10 Campagnolo for that sweet Huffy?
You know, an Aerowind jersey would be absurdly cool. Make sure you acquire an aero helmet to take full advantage of that frame's air slicing capabilities.
You know, an Aerowind jersey would be absurdly cool. Make sure you acquire an aero helmet to take full advantage of that frame's air slicing capabilities.
Likes For BFisher:
11-20-22, 03:44 PM
#16
Newbie
Mercian
Nice find. Yes your Mercian would look good in BRG, like my Waterford. Not exactly BRG, but close. Or blue and white with red striping like
my 1974 Mercian Pro Road frame. Union Jack
colors. Bill
Likes For BillRS22:
11-20-22, 03:46 PM
#17
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,856
Bikes: Yes
Mentioned: 532 Post(s)
Tagged: 0 Thread(s)
Quoted: 3300 Post(s)
Liked 4,088 Times
in
1,512 Posts
Thanks! That's very cool.
__________________
My Bikes
My Bikes
Likes For Andy_K:
11-20-22, 03:49 PM
#18
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,856
Bikes: Yes
Mentioned: 532 Post(s)
Tagged: 0 Thread(s)
Quoted: 3300 Post(s)
Liked 4,088 Times
in
1,512 Posts
__________________
My Bikes
My Bikes
Likes For Andy_K:
11-20-22, 03:50 PM
#19
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,856
Bikes: Yes
Mentioned: 532 Post(s)
Tagged: 0 Thread(s)
Quoted: 3300 Post(s)
Liked 4,088 Times
in
1,512 Posts
__________________
My Bikes
My Bikes
11-20-22, 03:53 PM
#20
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,856
Bikes: Yes
Mentioned: 532 Post(s)
Tagged: 0 Thread(s)
Quoted: 3300 Post(s)
Liked 4,088 Times
in
1,512 Posts
Yeah, it is a bit like that. I was there looking for wheels for a different frame. Ultimately this could end up being a net gain because I'm going to need to sell a few bikes to finance the paint for the Mercian.
__________________
My Bikes
My Bikes
Likes For Andy_K:
11-20-22, 04:09 PM
#21
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,561
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2756 Post(s)
Liked 3,427 Times
in
2,075 Posts
That's BBC though, so it isn't based in reality.
https://budgetbicyclectr.com/vintage...-sale.html?p=3
11-20-22, 04:36 PM
#22
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,856
Bikes: Yes
Mentioned: 532 Post(s)
Tagged: 0 Thread(s)
Quoted: 3300 Post(s)
Liked 4,088 Times
in
1,512 Posts
That's BBC though, so it isn't based in reality.
https://budgetbicyclectr.com/vintage...-sale.html?p=3
https://budgetbicyclectr.com/vintage...-sale.html?p=3
__________________
My Bikes
My Bikes
Likes For Andy_K:
11-20-22, 04:46 PM
#23
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,130
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2546 Post(s)
Liked 3,371 Times
in
2,113 Posts
Personally, I like your work. You could probably do a fine job.
11-20-22, 06:11 PM
#24
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,856
Bikes: Yes
Mentioned: 532 Post(s)
Tagged: 0 Thread(s)
Quoted: 3300 Post(s)
Liked 4,088 Times
in
1,512 Posts
I've made a few bikes look good, but I don't know how long they'd stay that way if ridden regularly. I have only have facilities to work with rattle cans. Plus I'd hate to have to do the masking on these lugs.
__________________
My Bikes
My Bikes
11-20-22, 06:38 PM
#25
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,703
Bikes: It's complicated.
Mentioned: 1307 Post(s)
Tagged: 0 Thread(s)
Quoted: 4719 Post(s)
Liked 5,989 Times
in
2,333 Posts
There's a sign right above the entrance to the Atelier:
"Bring the Mercian, leave the Huffy"
There wasn't earlier till I saw this post.
"Bring the Mercian, leave the Huffy"
There wasn't earlier till I saw this post.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.