I think that by asking for another Simplex pulley, you're setting yourself up for disappointment in very short order. The plastic they used in those just has not held up well at all. What happened to yours, happens to a LOT of them. Sun Tours match the dimensions, and don't have the propensity to spontaneously disintegrate.

I saw a couple of these restored bikes and were very impressed with it.Looking for a Nuovoitalia or ameritalia model and would be very willing to pay up to $1,000.00 for a nice umblemished frame.Thanks

Have:

Huret stem shifter, 5/6/7-speed non-indexed. Rider condition, needs a good cleanup. No guides:



Want:

Flexible, but will not accept cash. Parts trades only.

-Kurt

In that case, everyone should send me their Simplex pulleys in order to avoid imminent catastrophe! I do see the wisdom in your advice, but in this case I'm after 'correctness', not functionality.

Wanted: Araya Aero 1 tubular 27" 36 hole

( Replace damaged rim on '81 Lotus Super Pro "Aero" EDIT: I thought this bike was a 700c setup but apparently it's 27". I could have sworn that the original Araya Aero 1's were 700c. But my spares are actually Araya 27 1W rims and they mate with the brake pads just fine. So I guess I am actually looking for Araya Aero 1 in 27" 36h to replace the damaged rear wheel. &nbsp

I'm not sure if this is anything like you're looking for, but I came across this on Craigslist and figured I'd post it for you.

https://losangeles.craigslist.org/lac...778896883.html

It looks as if we've been moved...

I am now ISO cable/housing cutters. Used is fine, as long as it still cuts at least cables cleanly.

Also ISO:
-Size 12-12.5 road or mountain shoes

JYB....I have a few sets of Simplex pulleys. PM for a pair on the house.

ISO: Dura Ace 7400 rear axle cones for a freewheel style hub.

Will ones from a tri-color 600 cassette hub work?

No. I'm fairly certain its a Dura Ace specific part.

ISO 6/3 18 speed bar-end shifters.

PM sent.

my bad, thread is now where it is supposed to be

Have
Campagnolo? Seatpost 25mm It’s been cut for some reason.
Campagnolo Victory Seatpost 25 mm
Campagnolo Victory Calipers and levers no hoods otherwise very good shape
Extra Set Victory Levers missing some hardware no hoods
Campagnolo spindles 70-ss black and silver
Campagnolo 80's Record Calipers no barrel adjusters
Miscellaneous spindle says 3GB SCM 85-1
Shimano bottom bracket cups English (Traded)
Campagnolo veloce? cartridge bottom bracket (black) Italian thread Good shape
Sugino bottom bracket Italian thread Good shape
Miscellaneous campy bottom bracket cup
Campagnolo Super Record Rear Derailleur Pat 80. Good condition I recently rebuilt it entirely.
2 x Shimano 600 rear derailleur’s
Shimano light action derailleur
Saccon Aero levers
Grande Compe Aero levers (Traded)
Campagnolo shift levers cut outs
Campagnolo shift levers standard
Shimano 105 levers
Mavic GP4 wheels rear wheel has campy low flange
More to come have not had a chance to take pics of everything

Pics available here

https://picasaweb.google.com/rickbaisa/TradePics#



Need
Campy brake pivot bolt
Campy Record High Flange Hubs

ISO: not C&V stuff
-Modern triple road crankset + bottom bracket for my cyclocross/offroad touring build ('05 Raleigh Team Cross). Something with about a 30-32 small ring and 165-170 arm length. Prefer Shimano (105 or better) or FSA but will consider others. Not really sure what I want but need to replace the track cranks on there now. Pending
- 105 or better triple clamp on FD - Pending
- Michelin Cyclocross Jet tires - 700x30
- Cross levers

Have: C&V stuff.
-Superbe Pro crankset. 170. Nice condition with black rings.
- Also a bunch of other stuff, see my past on page 146 for more

OK, I've hit a major snag.

I have a rear RSX road caliper with short reach. Based on the size of my frame, I thought it would be able to accommodate 700c wheels (Nishiki frame made for 27"). Not so.

If anybody has a caliper with long reach that even KIND OF resembles an RSX caliper (picture below), I'll trade you my caliper with short reach.

This project is getting way too difficult.

I had the same problem w/ my Trek. I picked up a Tektro medium reach (looks similar enough for me) for $17 from my LBS. It works fabulous

I should have an extra rear shimano slr caliper. Single pivot and not beautiful but the reach is 47-57

I'd love to see some pictures. Pretty much anything that'll brake and has pads.

The pads are old and hard but slr calipers are decent for a single pivot and have really long reach. I can take a pic later tonight.

Have: New/unused 13-30 Suntour Winner Freewheel (4 prong) British threading

Want: New/unused freewheel with 12-13 small and 26-28 large, something vintage & long wearing, think Suntour, Sante, Dura Ace. British threading

I could use some help to locate a whole (or parts for) front wheel for a 1989 Club Fuji. The component group is Shimano Exage A450 Sport LX, including the missing front hub. The rim would be Wolber Gentleman GTA 700c, double walled with eyelets. That's all that I know, except what's listed on teh ClassicFuji 1989 brochure.

On the outside chance that you might have either of these components available or such a wheel not committed to an existing bike?

Thanks so much,
Phil G.

ISO
Mavic open pro 700c front wheel, silver/grey
Brook imperial
On One Midge bars or similar

ELF bmx f/f

Have
Sugino ALP double, 170mm
Sugino Mighty comp double, 171
Red Look pedals
Fuji Saddle from 85 team
Shimano aberesque? fr&r derailures

suntour cyclone aero shifters
Scott aero bars
lots of chain rings/stems/levers

ISO 4x shimano style brake pad carriers. dont need the brake pads just the carriers so i can put carbon pads on older brakes


Have (in addition to my stuff from the last few pages)
pair of NOS 650c 28h Mavic open 4 CD clincher rims