Toronto's Post and Ring Bikestands Vulnerable
#1
Thread Starter
Dead Men Assume...
Joined: Sep 2004
Posts: 852
Likes: 0
From: Singapore
Bikes: Bike Friday NWT
Toronto's Post and Ring Bikestands Vulnerable
Not sure if this has been posted before or not but read in the Toronto Star that the city's famous post-and-rings can be snapped open with a two-by-four piece of wood:
https://www.thestar.com/NASApp/cs/Con...2154&t=TS_Home
Beside the post lay a plank of wood, and the metal ring that bears the words City of Toronto was left in two pieces. Lama believes there's a flaw in the bike post that allowed the thief to use the two-by-four as leverage to snap the ring in two.
"When I talked to the cops, they said a couple of other bikes were stolen that way." The officer told him to get rid of the wood "so no one sees that these posts can be busted like that."
"When I talked to the cops, they said a couple of other bikes were stolen that way." The officer told him to get rid of the wood "so no one sees that these posts can be busted like that."
https://www.thestar.com/NASApp/cs/Con...2154&t=TS_Home
#2
I passed this along to a friend in Toronto. She'd read the article and says the new trend is for bike thieves to pull up with a truck, and load the entire bike rack, bikes, locks, and all.
__________________
Some people are like a Slinky ... not really good for anything, but you still can't help but smile when you shove them down the stairs.
Some people are like a Slinky ... not really good for anything, but you still can't help but smile when you shove them down the stairs.
#3
<2<wheel<<REWIND<
Joined: Aug 2006
Posts: 46
Likes: 0
From: Toronto
Bikes: Cervelo 2010 RS (for fun) - Specialized '06 Langster fixie (for commuting)
i saw that article today - particularly brutal since myself and two other co-workers (out of a work force of less than TEN) have had bikes lifted in the last month or so.
harvesters are out in full-force, protect your assets, folks.
joe
harvesters are out in full-force, protect your assets, folks.
joe
#4
So I says to Mable I says
Joined: Jul 2005
Posts: 4,947
Likes: 0
From: Toronto
Bikes: '05 Urbanite Fixie, '06 Lemond Croix de Fer, '06 Jamis Dragon Pro, '07 IRO Bikeforums Track, '07 Planet-X Uncle John
Somewhat off-topic: I lost my front wheel last week. blargh.
A friend of mine returned to his bike a couple years ago to find half the ring snapped off. Close call!
A friend of mine returned to his bike a couple years ago to find half the ring snapped off. Close call!
#5
Raving looney
Joined: Jul 2006
Posts: 2,482
Likes: 0
From: Toronto, ON, Canada
Bikes: 70s Leader Precision w/Shimano 600 (road), IRO Rob Roy (Fixed)
Wow, that's an eye opener - thanks for the link.
I had my bike taken from my own back yard between 3pm and 6pm the other Sunday, thankfully my lock (it wasn't locked TO anything, just to the frame/backwheel) saved the day I think, as I found it across the street and just around the corner. They ripped off my tools and kit, and my saddle but left the saddle bag (who does that?!)..
Scares me reading this about the posts now.. I use one for 20 mins on my commute in
Edit: lock is an Onguard standard Ulock, worth every darn penny!
I had my bike taken from my own back yard between 3pm and 6pm the other Sunday, thankfully my lock (it wasn't locked TO anything, just to the frame/backwheel) saved the day I think, as I found it across the street and just around the corner. They ripped off my tools and kit, and my saddle but left the saddle bag (who does that?!)..
Scares me reading this about the posts now.. I use one for 20 mins on my commute in

Edit: lock is an Onguard standard Ulock, worth every darn penny!
Last edited by Flimflam; 08-09-06 at 03:43 PM.
#7
Try finding two immovable posts 1 meter apart, and lock the frame & a wheel to each of them? The bike pictured below is locked to a parking meter and a street sign, for example. 2 types of locks, etc etc. https://www.mechbgon.com/lock/index.html
#10
Well I think if they can snap the rings off they can just slide the bicycle up off the pole afterwords.. but then again i guess it depends how and where the ring actually brakes, I would do that just to be on the safe side if I couldnt find anything else to lock too.
Last time I was in Toronto was 2001, saw lots of frames of gutted bicycles locked up everywhere.
Last time I was in Toronto was 2001, saw lots of frames of gutted bicycles locked up everywhere.
#11
cab horn

Joined: Jun 2004
Posts: 28,353
Likes: 30
From: Toronto
Bikes: 1987 Bianchi Campione
Originally Posted by divineAndbright
Well I think if they can snap the rings off they can just slide the bicycle up off the pole afterwords.. but then again i guess it depends how and where the ring actually brakes, I would do that just to be on the safe side if I couldnt find anything else to lock too.
Last time I was in Toronto was 2001, saw lots of frames of gutted bicycles locked up everywhere.
Last time I was in Toronto was 2001, saw lots of frames of gutted bicycles locked up everywhere.
#12
Thread Starter
Dead Men Assume...
Joined: Sep 2004
Posts: 852
Likes: 0
From: Singapore
Bikes: Bike Friday NWT
Originally Posted by mechBgon
How about ignoring the ring, and just locking to the post itself with a U-lock, like in the pic below. Any good?
#13
Quote:Beside the post lay a plank of wood, and the metal ring that bears the words City of Toronto was left in two pieces. Lama believes there's a flaw in the bike post that allowed the thief to use the two-by-four as leverage to snap the ring in two.
"When I talked to the cops, they said a couple of other bikes were stolen that way." The officer told him to get rid of the wood "so no one sees that these posts can be busted like that."
Good thinking, never suspecting it was going to be published in the paper for millions to read, anyway.
"When I talked to the cops, they said a couple of other bikes were stolen that way." The officer told him to get rid of the wood "so no one sees that these posts can be busted like that."
Good thinking, never suspecting it was going to be published in the paper for millions to read, anyway.
__________________
Some people are like a Slinky ... not really good for anything, but you still can't help but smile when you shove them down the stairs.
Some people are like a Slinky ... not really good for anything, but you still can't help but smile when you shove them down the stairs.
#14
Originally Posted by IronMac
That sounds like a good idea but I'm not sure how much clearance there is along the post below the ring itself. You may have to take off the front wheel in order to have the bike "kneel" down enough.
Alternately, with a fairly long chain like a Kryptonite New York Chain, you could put a couple wraps of chain around the post down there below the ring and make sure all available slack is removed, to get a "python grip" on the post. But if I had a New York Chain along, I'd go right for a full-blown streetlight pole. Let's see them cut through THAT!
Last edited by mechBgon; 08-10-06 at 09:35 AM.
#15
Thread Starter
Dead Men Assume...
Joined: Sep 2004
Posts: 852
Likes: 0
From: Singapore
Bikes: Bike Friday NWT
The city has started a series of tests to see how vulnerable the posts really are:
https://www.theglobeandmail.com/servl...ery=bike+posts
https://www.theglobeandmail.com/servl...ery=bike+posts
#16
Senior Member
Joined: Dec 2004
Posts: 1,258
Likes: 1
From: Toronto
Bikes: BikeE AT, Firebike Bling Bling, Norco Trike (customized)
The latest story, this time from the Toronto Sun
https://www.torontosun.com/News/Toron...58316-sun.html
https://www.torontosun.com/News/Toron...58316-sun.html






