Go Back  Bike Forums > Bike Forums > Singlespeed & Fixed Gear
Reload this Page >

Some stem/bars/chain questions

Notices
Singlespeed & Fixed Gear "I still feel that variable gears are only for people over forty-five. Isn't it better to triumph by the strength of your muscles than by the artifice of a derailer? We are getting soft...As for me, give me a fixed gear!"-- Henri Desgrange (31 January 1865 - 16 August 1940)

Some stem/bars/chain questions

Old 01-17-18, 01:55 PM
  #1  
Senior Member
Thread Starter
 
Join Date: Oct 2016
Location: Arizona
Posts: 106
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 63 Post(s)
Likes: 0
Liked 2 Times in 2 Posts
Some stem/bars/chain questions

I am looking into making my Bianchi Pista a bit more comfortable for riding around town. Currently have "bullhorns" from previous owner that I realized were sawed off upside down drops when I rewrapped them. My main question is, looking at my picture, should I be trying some sort of different stem, or should I just buy the cheapest pair of riser bars that I can find and see if I like them? I will eventually invest in nice drops, but I want another option that allows a slightly more upright position. Also, I know almost nothing about the components of this bike. Are those risers under the stem, or is that all part of the headset? Sorry, I'm a bit of a newbie.


As for the chain, it says KMC K-4L but I can't find out anything about this chain on the KMC website. I believe it might be the wrong chain for the bike, since the bike makes a strange sound when in motion, but it might just need cleaning and lube.
Attached Images
File Type: jpg
stem.JPG (88.4 KB, 112 views)
File Type: jpg
chain.JPG (95.7 KB, 110 views)
rEVOLVED is offline  
Old 01-17-18, 02:08 PM
  #2  
Senior Member
 
seau grateau's Avatar
 
Join Date: Sep 2009
Location: PHL
Posts: 9,948

Bikes: Litespeed Catalyst, IRO Rob Roy, All City Big Block

Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 1332 Post(s)
Liked 398 Times in 194 Posts
They're called spacers, and they can be moved above or below the stem, depending on how high you want it to be. The chain is a K710. If it's working now, it's fine. Noise probably means it's too tight or the drivetrain is dirty, and your cog looks like it was recovered from the wreckage of the Titanic, so a good cleaning would be a good place to start.
seau grateau is offline  
Old 01-17-18, 02:59 PM
  #3  
Señor Member
 
cali_axela's Avatar
 
Join Date: Aug 2012
Location: Portland, OR
Posts: 624

Bikes: All of them

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 31 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
What about your current position on the bike feels uncomfortable around town? Does it feel too aggressive, like you're hunched down and you'd prefer to be more upright? Or do you feel too stretched out, like you're reaching too far to get to the place you prefer holding your current bars? Since your stem is currently set as high as it can go, if you want a more upright position you should get a new stem with a greater angle so it'll raise the bars even higher. You could also try getting it 10 or 20mm shorter to decrease the reach, too. That sounds like a good place to start, rather than trying new bars -- I still use cut-off drops as bullhorns on my street fixie and love em, nothing wrong with that.
cali_axela is offline  
Old 01-17-18, 03:43 PM
  #4  
Senior Member
Thread Starter
 
Join Date: Oct 2016
Location: Arizona
Posts: 106
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 63 Post(s)
Likes: 0
Liked 2 Times in 2 Posts
Originally Posted by seau grateau
They're called spacers, and they can be moved above or below the stem, depending on how high you want it to be. The chain is a K710. If it's working now, it's fine. Noise probably means it's too tight or the drivetrain is dirty, and your cog looks like it was recovered from the wreckage of the Titanic, so a good cleaning would be a good place to start.
Recovered wreckage from the Titanic?

I need to learn how to disassemble this thing and clean it! Or maybe I can clean it well enough without taking it apart.
rEVOLVED is offline  
Old 01-17-18, 03:52 PM
  #5  
Senior Member
Thread Starter
 
Join Date: Oct 2016
Location: Arizona
Posts: 106
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 63 Post(s)
Likes: 0
Liked 2 Times in 2 Posts
Originally Posted by cali_axela
What about your current position on the bike feels uncomfortable around town? Does it feel too aggressive, like you're hunched down and you'd prefer to be more upright? Or do you feel too stretched out, like you're reaching too far to get to the place you prefer holding your current bars? Since your stem is currently set as high as it can go, if you want a more upright position you should get a new stem with a greater angle so it'll raise the bars even higher. You could also try getting it 10 or 20mm shorter to decrease the reach, too. That sounds like a good place to start, rather than trying new bars -- I still use cut-off drops as bullhorns on my street fixie and love em, nothing wrong with that.
It's not that I hate my current riding position. I just like options. I will definitely be more mindful on my next ride and see exactly what I'm looking to change. Thanks for the input!
rEVOLVED is offline  
Old 01-17-18, 05:10 PM
  #6  
Senior Member
 
seau grateau's Avatar
 
Join Date: Sep 2009
Location: PHL
Posts: 9,948

Bikes: Litespeed Catalyst, IRO Rob Roy, All City Big Block

Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 1332 Post(s)
Liked 398 Times in 194 Posts
Originally Posted by rEVOLVED
Recovered wreckage from the Titanic?

I need to learn how to disassemble this thing and clean it! Or maybe I can clean it well enough without taking it apart.
Yeah, you can do a pretty good job without disassembling too much. Just take off the wheel and give the cog a good scrubbing with a degreaser (I use Simple Green) and a coarse brush or sponge. Give the chain and chainring the same treatment, wipe dry, then re-lube the chain.
seau grateau is offline  
Old 01-17-18, 09:44 PM
  #7  
Senior Member
Thread Starter
 
Join Date: Oct 2016
Location: Arizona
Posts: 106
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 63 Post(s)
Likes: 0
Liked 2 Times in 2 Posts
Ok, so I just went out for a few miles with my handlebar position in mind, and I didn't come to anything conclusive. I wouldn't call the ride aggressive by any means, but I know that I'm looking for a bit more comfort overall. If anything, I may agree with the notion that I felt a little bit stretched out. I'm super new to the idea of trying to make my bike fit me perfectly, but with my back problems, I need to be certain that everything is where it should be.

I don't mind messing with the stem a little bit, but I'm confused that the simple answer doesn't seem to just be cheap riser bars. Would that be a bad idea?
rEVOLVED is offline  
Old 01-17-18, 10:18 PM
  #8  
Senior Member
 
79pmooney's Avatar
 
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,825

Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder

Mentioned: 128 Post(s)
Tagged: 0 Thread(s)
Quoted: 4742 Post(s)
Liked 3,860 Times in 2,509 Posts
Your bike's a fix gear. The most basic bike there is. The drivetrain hardly needs to be clean. The cog needs no attention at all unless the opinion of forum members matters. (My workhorse fix gear gets no attention for 18 months at a time save quick rinses with a light shower setting with the garden hose. I go probably 8-17,000 miles on two chains, then replace the cog, ring and chain.)

Chain tension (actually lack of tension) is important. I see to it the chain never goes tight over several full pedal revolutions until I know the chain has gone completely around. Super tight chains seem to be the popular thing now, but if you go the velodrome and watch the big boys race, you will see zero tight chains. That's right. None.

I googled KMC and found this: https://kmcchain.us/chain/k710/ I think you have a K-710. A BMX chain. It will work just fine but it is compete overkill for road riding. You hardly need peened rivets/pins. Regular rivets work just fine on 1/8" chains for our use and can be driven in and out repeatably with no damage to the side plates. (A chain I really like is the standard Isuzue chain, roughly $25. Very reliable.)

Bars and stems are so personal I won't go there. Plus I am such a drop HB guy, I know about nothing re: any other shape.

Ben
79pmooney is offline  
Old 01-19-18, 10:46 AM
  #9  
Senior Member
Thread Starter
 
Join Date: Oct 2016
Location: Arizona
Posts: 106
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 63 Post(s)
Likes: 0
Liked 2 Times in 2 Posts
I actually ended up flipping my bullhorns towards me last night for a 5 mile ride, essentially turning them into cafe bars. This definitely made for an interesting ride. I was much more upright, which I liked since I was riding in traffic after dark, but my back still hurt after the ride. I'm now wondering if at just over 6'1" my 57 frame is a tad too small for me. I'm leaning towards sizing up my next frame and attempting something closer to a french fit.
rEVOLVED is offline  
Old 01-25-18, 03:59 AM
  #10  
Junior Member
 
Join Date: May 2017
Posts: 18
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I wouldn't go thinking too small for your height and such a short ride. I'm 190cm and rode a 58cm 200km, 2 days with a full pack without issue. And that was the first proper long ride I ever did.
Have you had the bike fitted?
sabotenfighter is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
johnbanaag
Singlespeed & Fixed Gear
5
06-10-14 05:24 AM
John Nolan
Classic & Vintage
3
06-04-14 10:39 AM
zao
Touring
4
09-27-12 09:30 AM
SurlyLaika
Bicycle Mechanics
4
01-11-12 10:27 PM
oneeyedhobbit
Singlespeed & Fixed Gear
7
09-17-10 07:08 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.