![]() |
Stepping off a Fixie
Ok here What are your techniques for stopping/getting off a fixed gear bicycle? |
The same as any other flavor of drive-train on a road bike, it's not a circus act.
-Bandera |
For me it depends.
For clipless... If I have a brake it's about the same as a freewheel bike because I can stop on the part of the stroke I want. If I don't have a brake I think about where I want to end up and unclip the planting foot just before I get there while my attached foot is in the down stroke. This gives enough time to plant my free foot before the clipped foot makes another rotation. The upstroke acts as the last bit of stopping force. |
Triple axel.
|
I try for the Lutz but it winds up looking like the klutz...
|
There's the "Sheldon Brown" dismount:
Instead of getting off to the side of the bicycle, the fixed-gear rider can go straight off the back. This technique works best if you ride with clips and straps, but if you are really proficient in disengaging from clipless pedals, try it at your own risk. As the bicycle slows to near walking speed, disengage your left foot, then wait for the right pedal to get to the bottom of its circle. As the right pedal starts to rise, straighten your right leg and let the motion of the pedal lift you up. Let go of the handlebars, let the saddle move forward between your legs, and put your left foot on the ground. As the bike goes ahead, grab it by the saddle. It takes a bit of courage to try this, but it is actually very easy to do. It is also extremely impressive to watch. When executed properly, it is very smooth, and you can go from riding to walking in a single fluid motion, without ever coming to a stop. |
When I want to stop bike, I time the bike to slow down, no stop. I decided I want to get off bike to the non drive side, I unclipped the drive side, kept non drive clipped in. Let's non drive's momentum lift me up, I also stand out of saddle as it lift left leg up, my right leg swing over the top tube and saddle toward the rear tire.
When non drive side lifted me at around 90 degree, my right legs (should be at non drive side now) will touch the ground then unclip left side afterward. Note: if you fail to unclip left side as moments your right touch the ground, you may finds it awkward. Practice make perfects. |
Jump off the back as descrbed up a few posts |
I unclip just before the bike comes to a stop. Put one foot down, then lift the other leg over the back. Hmm... that's just how I get off any bike.
|
Originally Posted by hay
(Post 20647433)
Jump off the back as descrbed up a few posts |
Originally Posted by rms13
(Post 20652638)
yep. jump off the back and ghost ride it into some bushes and go collect it
|
Originally Posted by mtb_addict
(Post 20652661)
What if you come to a stop, and your pedal is in the wrong position? But you cannot roll forward to reposition the pedal, due to cross traffic.
|
Originally Posted by mtb_addict
(Post 20652661)
What if you come to a stop, and your pedal is in the wrong position? But you cannot roll forward to reposition the pedal, due to cross traffic.
Ben |
Originally Posted by mtb_addict
(Post 20652661)
What if you come to a stop, and your pedal is in the wrong position? But you cannot roll forward to reposition the pedal, due to cross traffic.
-Bandera |
I never get off my fixie.
|
https://cimg5.ibsrv.net/gimg/bikefor...ba31e8550b.jpg Mom,bring me a meat loaf sandwich. |
Just lift up the road and move it back a bit.
Or accept certain death as Seau says - we all gotta go sometime. Might as well be while doing something we don't fully comprehend. |
Originally Posted by mtb_addict
(Post 20652661)
What if you come to a stop, and your pedal is in the wrong position? But you cannot roll forward to reposition the pedal, due to cross traffic.
|
Originally Posted by JohnDThompson
(Post 20654966)
Apply front brake to lock the wheel, push forward, lifting the rear wheel off the ground, rotate the pedals until they're properly oriented, release front brake, done.
|
Originally Posted by TimothyH
(Post 20653030)
I never get off my fixie.
Dave |
Originally Posted by Caliper
(Post 20655929)
Or, lacking a brake, just pick up the rear of the bike between your legs and rotate the pedals to reposition. It's less graceful, but would work assuming you aren't riding a fairly oversized frame.
also that meatloaf sandwich looks good, thread jack the topic to favorite sandwiches? |
Originally Posted by hardboiled718
(Post 20659155)
You don't even really need to step off the bike, or use the front brake. If you've got some foot retention just hop the rear wheel, similar to how you'd do a skip stop, and back pedal while it's in the air
|
Originally Posted by Caliper
(Post 20660178)
Who said anything about getting off? You're still astride the bike, just lifting the rear wheel between your legs to spin it.
|
Originally Posted by mtb_addict
(Post 20662697)
After reading this thread, I really now want to get a fixie and learn to become a master of fixed gear bike control.
Dont overthink it |
It's too late Hffy Addict has already been overthinking it to the point the old brain got so hot it turned to liquid and poured right out ; )
They have no plans to ever buy a bike and if they do it will be another wally-mart special so they can avoid mountain biking like the plague. When I make plans for bikes I usually try and follow through with them if I have the money or I will at least put parts to use on frames I pick up. I do like to sit around and say "oooh new bike should I do it" but then usually at some point I will have a new bike (or an old bike) In this year alone I have done about 7 different projects granted a lot of it was free stuff that I put a little money into to build up (or the Langster which was a replacement for a cracked frame) and two of those builds I am 100% not keeping because they aren't my size and one build I am probably selling but wanted something extra to play with for this winter. Our Addict in the past three years hasn't done anything. Granted I probably won't take on that many projects again for a long time because it has been overwhelming and hard to get things finished but on the plus I have gotten rid of some spare parts and cleaned up a little(ish) |
| All times are GMT -6. The time now is 11:39 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.