Nashbar Nekkid VS Wabi Classic Which One For Someone New to SS
The Wabi Classic is $275 the Nashbar Nekkid is $125. They both should fit. I'm using it for around town but would like to try it on slower 11-14 mph group rides of 20-30 miles. Is the Wabi Really going to be that much better?
https://cimg1.ibsrv.net/gimg/bikefor...d4433ab016.png The Wabi in question... https://chattanooga.craigslist.org/bik/d/chattanooga-wabi-classic-single-speed/7394066665.html Don't really like the bullhorn bars. https://cimg7.ibsrv.net/gimg/bikefor...98f06f8a3b.png |
That Wabi only has a front brake. If you are going to ride it with a singlespeed freewheel, you will need to add a rear brake. Also, Wabis are sized center to center, so a 55cm will be equivalent to a 58cm sized center to top. Make sure you stand over the bike before buying.
The Wabi frameset and wheelset are much better quality and lighter than the Nashbar. If you are climbing hills, it is worth the extra cost. |
Originally Posted by TejanoTrackie
(Post 22283175)
That Wabi only has a front brake. If you are going to ride it with a singlespeed freewheel, you will need to add a rear brake. Also, Wabis are sized center to center, so a 55cm will be equivalent to a 58cm sized center to top. Make sure you stand over the bike before buying.
The Wabi frameset and wheelset are much better quality and lighter than the Nashbar. If you are climbing hills, it is worth the extra cost. On the other hand. I want to buy drops. That plus a rear brake means the Wabi is going to cost over $400 all in |
Originally Posted by RoadWearier
(Post 22283252)
Ok. Thanks. There are definitely hills. Does something other than weight lead you to that conclusion?
As to the cost issue, you will need to buy a pair of cone wrenches to adjust the wheel bearings on the Nashbar. Either that, or pay a bike shop to do it. Sometimes, the bearings are too tight from the factory, causing unnecessary drag and wear. Also, the Wabi wheels will be true, but the Nashbar wheels might not be. Do you know how to true your wheels ? If not, more expense at the bike shop. |
Originally Posted by TejanoTrackie
(Post 22283296)
No, mainly the weight difference.
As to the cost issue, you will need to buy a pair of cone wrenches to adjust the wheel bearings on the Nashbar. Either that, or pay a bike shop to do it. Sometimes, the bearings are too tight from the factory, causing unnecessary drag and wear. Also, the Wabi wheels will be true, but the Nashbar wheels might not be. Do you know how to true your wheels ? If not, more expense at the bike shop. |
I think the Wabi would be easier in a resale scenario so I would lean more towards it.
$275 is a great price for it. Wish it were closer to me |
Looks like the price on the wabi went up to $400. They look like quite different bikes to me. Certainly very different price-points. The Nashbar is probably good enough for how you say you plan to use it.
|
Originally Posted by kingston
(Post 22283604)
Looks like the price on the wabi went up to $400. They look like quite different bikes to me. Certainly very different price-points. The Nashbar is probably good enough for how you say you plan to use it.
I'm starting to understand why so many folks on here own so many bikes! |
The Wabi is a better bike. If you're looking for a bike for hills and group rides, a bike with gears will be better than either one.
|
A Wabi Classic for $275?!? You'd be a fool not to go that route
noticed you said you'd buy the cheaper first then the Wabi if u don't like it... But why? Just buy the better bike at an amazing price. |
Originally Posted by ceelint
(Post 22286827)
A Wabi Classic for $275?!? You'd be a fool not to go that route
noticed you said you'd buy the cheaper first then the Wabi if u don't like it... But why? Just buy the better bike at an amazing price. |
55cm Classic might be too large for you - especially standover. I'd measure you actual inseam and check how it clears the 32.5" standover.
|
Originally Posted by wabi_damon
(Post 22287157)
55cm Classic might be too large for you - especially standover. I'd measure you actual inseam and check how it clears the 32.5" standover.
|
With all those spacers under the Wabi’s stem, you can probably lose the Viagra stem angle and still find a comfortable handlebar height. That said, the rear tire clearance at the seat tube looks pretty tight — keep that wheel true and round!
|
Originally Posted by RoadWearier
(Post 22287377)
Yeah I looked up sizing on the website. Good deal or not I think I'm just going to stick with this. I just busted my ass test-riding an old Bianchi ten-speed so I'm done with bike looking. Think I'll just concentrate on bike riding.
|
Buy the Wabi. Better quality bike and worth putting more money into over the years. Make sure it fits you, and +1 for adding a rear brake. You won't have buyer's remorse with the Wabi, the Nashbar you probably will.
|
All times are GMT -6. The time now is 06:35 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.