Time for a new seat. Suggestions?
#1
Senior Member
Thread Starter
Join Date: Oct 2018
Location: Thornhill, Canada
Posts: 707
Bikes: United Motocross BMX, Specialized Langster, Giant OCR, Marin Muirwoods, Globe Roll2, VROD:)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 221 Post(s)
Liked 362 Times
in
224 Posts
Time for a new seat. Suggestions?
The OEM seat on my Roll2 is starting to look worn and has a few tears at the butt corner.
I like the look of the rivets and while another white seat will keep it looking original I'm open to suggestions re colour.
What's your opinion on a B17? Eg. Is it the right seat for my bike setup. I understand these Brooks seats take a while to break in (~500miles?) and costly but will probably be the last one I buy.
So what say you fine folks.......
I like the look of the rivets and while another white seat will keep it looking original I'm open to suggestions re colour.
What's your opinion on a B17? Eg. Is it the right seat for my bike setup. I understand these Brooks seats take a while to break in (~500miles?) and costly but will probably be the last one I buy.
So what say you fine folks.......

#2
Full Member
Join Date: Mar 2004
Location: Glendora, CA
Posts: 379
Bikes: Merlin Extralight '94 & Cannondale Supersix '15
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 210 Post(s)
Liked 253 Times
in
152 Posts
The white saddle looks great on your rig.
You can find Selle San Marco Rolls saddles in white on eBay all day long.
Typically about $100 or so and way more comfy than any Brooks.
You can find Selle San Marco Rolls saddles in white on eBay all day long.
Typically about $100 or so and way more comfy than any Brooks.
Likes For roadcrankr:
#4
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 12,442
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 3916 Post(s)
Liked 3,383 Times
in
2,273 Posts
I hear Recaro makes great seats for a lot of applications for a bike I would go for a saddle and for me personally I would go Brooks Cambium C17 for my checks but in the end none of that matters it is all about what you find comfortable.
If you liked your current saddle the Soma Okami saddle is pretty close to it I had a Ta-Bo from them which of course it a Selle Italia Turbo clone because at the time I wanted a direct replacement for the old Turbo saddle on a vintage bike that I could ride as this saddle was a limited edition from what I understand and didn't want to further ride it.
If you liked your current saddle the Soma Okami saddle is pretty close to it I had a Ta-Bo from them which of course it a Selle Italia Turbo clone because at the time I wanted a direct replacement for the old Turbo saddle on a vintage bike that I could ride as this saddle was a limited edition from what I understand and didn't want to further ride it.
#5
Senior Member
Thread Starter
Join Date: Oct 2018
Location: Thornhill, Canada
Posts: 707
Bikes: United Motocross BMX, Specialized Langster, Giant OCR, Marin Muirwoods, Globe Roll2, VROD:)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 221 Post(s)
Liked 362 Times
in
224 Posts
I've been searching....so many choices out there!
I really like the Soma Okami Lite and the copper rivets add a nice touch, but doesn't appear to be available in white.
Probably go with another white seat......
I really like the Soma Okami Lite and the copper rivets add a nice touch, but doesn't appear to be available in white.
Probably go with another white seat......
Last edited by Speedway2; 05-21-23 at 10:08 AM.
#6
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 12,442
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 3916 Post(s)
Liked 3,383 Times
in
2,273 Posts
It used to be available in white I would reach out to Soma/Merry Sales Co and see if they might have one or know if any shops might have one still?
#7
Tinker-er
Join Date: Oct 2007
Location: Mid-Atlantic
Posts: 275
Bikes: 1956 Rudge Sports; 1958 Rudge Sports; 1983 Univega Alpina Uno; 1981 Miyata 610; 1973 Raleigh Twenty; 1971 Raleigh Twenty; 1994 Breezer Lightning XTR, V4 Yuba Mundo aka "The Schlepper", 1987 Raleigh "The Edge" Mountain Trials, 1951 Rudge Aero Clubman
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 113 Post(s)
Liked 161 Times
in
111 Posts
See if you can get a loaner from a shop to try out.
Aside from that, I would highly recommend the Brooks Cambium saddles; no break-in period, no anxiety over getting them wet, no regular treatment with proofide or whatever else to soften/preserve the leather. I love my leather Brooks saddles; I have a B17, B67, and old version Conquest; that said, if it's your first Brooks, get a Cambium and just ride without the extra accoutrements, rituals, and anxiety. Take my opinion with a grain of salt though.
Go try out as many as you can. Friends' bikes, shop bikes, shop loaner saddles, whatever you can do to actually sit on one for more than a couple minutes. Your physiology is different than mine and every other person's, so you are only going to fit a saddle that works for YOU, not me, not anyone else out there.
Aside from that, I would highly recommend the Brooks Cambium saddles; no break-in period, no anxiety over getting them wet, no regular treatment with proofide or whatever else to soften/preserve the leather. I love my leather Brooks saddles; I have a B17, B67, and old version Conquest; that said, if it's your first Brooks, get a Cambium and just ride without the extra accoutrements, rituals, and anxiety. Take my opinion with a grain of salt though.
Go try out as many as you can. Friends' bikes, shop bikes, shop loaner saddles, whatever you can do to actually sit on one for more than a couple minutes. Your physiology is different than mine and every other person's, so you are only going to fit a saddle that works for YOU, not me, not anyone else out there.
Likes For PhilFo:
#8
Senior Member
Join Date: Jun 2013
Posts: 819
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 332 Post(s)
Likes: 0
Liked 126 Times
in
72 Posts
Brooks does make a pre-broken in seat. They are hard to find. I have a B-17 that was (right out of the box) super nice. It felt like I had a few thousand miles on it!
#9
Senior Member
Thread Starter
Join Date: Oct 2018
Location: Thornhill, Canada
Posts: 707
Bikes: United Motocross BMX, Specialized Langster, Giant OCR, Marin Muirwoods, Globe Roll2, VROD:)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 221 Post(s)
Liked 362 Times
in
224 Posts
Fhilfo....I like the low maintenance Cambium and it's available in light grey. Might look ok on my bike.
I'll have to check one out in person.....
I'll have to check one out in person.....
#10
Senior Member
Join Date: Nov 2010
Posts: 3,511
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 584 Post(s)
Liked 609 Times
in
446 Posts
Yes, Brooks does offer what they call "softened" saddles. I also ride Brooks leather and have Three bikes with B-17 and one with a Brooks Professional. I also have a Conquest that I've not ridden yet. Bought it for a song many years ago. I think I might put it on my SS 29er at some point in the future just to see how it feels. It is a sprung saddle, but it doesn't look hideous.
I'll echo the recommendation that you look at the C-17. They look great and most all of the reviews are positive.
I'll echo the recommendation that you look at the C-17. They look great and most all of the reviews are positive.
#11
Super-duper Genius
Join Date: Aug 2016
Location: Muskrat Springs, Utah
Posts: 1,692
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 760 Post(s)
Liked 952 Times
in
498 Posts
I have a Brooks Pro, which is similar to the B-17 but with laces and a center cutout. I like it, but I had to fuss around a lot making fine adjustments before I got it dialed in just right. I don't like taking it out in the rain. I have a cover that slips on, and I treat it with proof hide, but I prefer products I don't have to think about. I will say that if I had only one bike and put lots of miles on it, I'd probably use a Brooks.
I also have a Brooks C-15 on another bike. It is not very comfortable to me and probably never will be. It's fine for rides up to an hour or so. After that, I start wanting to get off.
My favorite seats are a few models from Fabric. They're the only ones I've ever tried that are comfortable from day one.
I also have a Brooks C-15 on another bike. It is not very comfortable to me and probably never will be. It's fine for rides up to an hour or so. After that, I start wanting to get off.
My favorite seats are a few models from Fabric. They're the only ones I've ever tried that are comfortable from day one.
#12
Full Member
Join Date: Mar 2004
Location: Glendora, CA
Posts: 379
Bikes: Merlin Extralight '94 & Cannondale Supersix '15
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 210 Post(s)
Liked 253 Times
in
152 Posts
Or you can go the Fizik Arione route (outfitted on all my bikes) to save half a pound over the Cambium.
Likes For Senrab62:
#16
Senior Member
Thread Starter
Join Date: Oct 2018
Location: Thornhill, Canada
Posts: 707
Bikes: United Motocross BMX, Specialized Langster, Giant OCR, Marin Muirwoods, Globe Roll2, VROD:)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 221 Post(s)
Liked 362 Times
in
224 Posts
...........and I thought this was going to be a simple decision

#17
Senior Member
On that bike a Brooks Swallow would pretty cool. Since you're sitting on it and it won't really be seen when riding, I'd say a black one. A Swallow will break in a "little" faster than a B17 or Brooks Pro. I have a Swallow on my Wabi Special.



#18
Senior Member
Thread Starter
Join Date: Oct 2018
Location: Thornhill, Canada
Posts: 707
Bikes: United Motocross BMX, Specialized Langster, Giant OCR, Marin Muirwoods, Globe Roll2, VROD:)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 221 Post(s)
Liked 362 Times
in
224 Posts
^^^^nice saddle.....but I can't justify the added cost vs a B17.
So far, the Brooks Cambium C19 Carved is in the top running @ $132CDN even with the weight penalty. Unfortunately, haven't found one in white.
So far, the Brooks Cambium C19 Carved is in the top running @ $132CDN even with the weight penalty. Unfortunately, haven't found one in white.
Last edited by Speedway2; 05-24-23 at 06:27 PM.
#19
Senior Member
Join Date: Aug 2006
Location: Valley Forge: Birthplace of Freedom
Posts: 1,276
Bikes: Novara Safari, CAAD9, WABI Classic, WABI Thunder
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 354 Post(s)
Liked 436 Times
in
230 Posts
Yeah, I just put a Cambium on one of my single speeds. Otherwise would go with a Pro. Though I've had a couple of B17's which work as well as you hear.