yellowjeep

Have.
Nice Kinesis Carbon 2 1in threadless carbon fork. 7.5 inches of steer tube.


NEED.
Nice lugged road fork, something with a nice sloping crown would be great. THREADED. With at least 6in of steer tube.

Gyeswho

buyer never payed so still available

piwonka

hey, i've got a nicely built specialized fork. it's lugged, long steer tube, for a 58-60cm frame probably. may have about 7.5" of steer tube. looks like it's definately for a racing type geometry. have you ever seen the san rensho built specialized bikes. it's look like that kind of fork.

yellowjeep

Hey I actually found a fork burried in a shop today. But I still need to get rid of the Carbon 2.

piwonka

i'm not interested in carbon.

scottbot84

Want:
Hood that fits an 80's shimano 105 SLR Aero lever, or a decent aero lever with a hood.

Have:
Vintage MKS pedals, just need to be rebuilt
home-made bullhorns with fresh cinelli tape
Dia compe center pull brakes
80's schwinn brake levers
[edit - pitboss]

red sox junkie

Want:
Large size single speed cross frame and fork (IRO Rob Roy, On One Il Pompino etc.) track ends/horizontal dropouts needed.

Have:
60 cm Scattante XRL cross bike frame and fork.

I bought this frame and like it a lot, but I got bitten by the fixed/SS bug and I can't do fixed on the Scattante.

Tunnelrat81

Have:

Single pivot brake calipers off of mid-80's Univega.
Narrow range (13-21?) 7 speed freewheel cassette, NIB.

Want:

Rear long reach brake caliper, dual pivot prefered. (I know someone here bought the nashbar long reach set and only needs/uses the front. Where are you?)

I'm going to fabricate a bracket clamp that will put the brake pivot bolt above the the undrilled cross-brace on the rear of my funnybike, and need a caliper that can extend far enough to reach the braking surface from a little less than a cm. above normal. I'm hoping a long reach caliper will do this for me.

-Jeremy

amorrow

Have: Colnago Dream B-Stay 55cm
https://students.washington.edu/amorrow/bikes.shtml

Want: Track Bike, Complete or nearly Complete

oldsprinter

Want: rear only Modolo Kronos caliper

Hirohsima

Have:
Pedalsoft trifecta stem/aerobar. Pedalsoft Trifecta Bar/stem combo. This is an ultra high-end aerobar setup which retailed for $400 new.... but now appears to have dropped in price to $369. I have 4 sets of these bars and am parting with one of my spares. This aerobar / stem combo weighs in at 495 grams with all parts attached. This is about the same as most company's clip on aerobar setups alone! Stem is CNC machines 7000 series aluminum and milled to perfection. Bars are reach adjustable and rotate. The arm rests integrate into the stem giving width and fore/aft rotational adjustments. This is one of the most adjustable and light setups out there.

Item is in superb shape. Bar was purchased new by me in 2005/2006 and used very rarely. Arm pads are in like new cond. Comes with everything pictured. 6 Titanium bolts + 2 Scanadium bolts (to attach the extensions) + 4 Stainless bolts (which I preferred for the bar clamps for added safety). Stem length is 12cm. Bar Clamp is 31.8. Steerer clamp is 1 1/8". Extensions are uncut and full length (dia 22.2 std).




Want:
Items must be in pristine shape please. I am anal.
Cool road or FG crank (Campy chorus, record, sugino, etc)
Fixed grear rear wheel or hub (silver high flange preferred)
1" quill stem silver pref 26.0 clamp

abeyance

Posting those here= seeing them without a handlebar on a bike in a month either on bikesnob or the jackass thread.

c0urt

does anyone have a 650c front wheel thats in good shape?

Hirohsima

OK, how about this one:
Have LOOK Ergo stem. Used, but you would never know it. Item is pristine and about as close to new as you can get. Quill has next to ZERO signs of use. Original aluminum quill bolt is perfect as are all the other adjustable bolts. Tiny scratch on front section.






Want:
Sugino 75 cranks or other cool cranks
Terry Fly saddle (w/ ti rails)

snortCRANK

someone has an aerospoke a few posts up

snortCRANK

have: 59 chrome bianchi pista 07

want: 59 matte black pista 03/04? (sale/trade)

kit

Have:
brand new white deep vs on formula hubs with a brand new 18t phil wood 1/8 cog
lightly used nitto rb-021 handlebar - 42 cm
brand new On Guard Rottweiler 5023 lock



Want:
17t cog
silver soma cross levers
womens saddle- maybe turbo ladies or fizik...
50cm iro group buy or other drilled track frame with a top tube of 48cm-51cm

c0urt

I have a soma 15t 1/8 cog i dont need

euphoria

I have a cane creek 200tt aero lever that I'd trade for a crosstop style lever

bward1028

i really really need a super cheapo wheelset, like something that came off of someone's kilo tt or the like.

deathhare

Major long shot i know...but im looking for one of these Nitto stems in a 80 or 90mm.
Have lots of crap to trade or PM me for other options.

nateintokyo

those are tough to find in bigger sizes....good luck! I'll keep an eye out for what it's worth...

deathhare

Yeah thanks for looking.
Punch has a 100mm one for sale if you happen to be looking. [edit - pitboss]

pitboss

take discussions of things other than goods in a trade scenario to PMs. this is not a for sale thread. posts requesting/offering money with be edited.

thanks

Jserse

Spinergy Rev X

58cm FetishPosition Track Frame/Forte Carbon Fork. Complete or just F/F

Want:

What do you have to trade??