Go Back  Bike Forums > Bike Forums > Singlespeed & Fixed Gear
Reload this Page >

fixed frame sizing

Notices
Singlespeed & Fixed Gear "I still feel that variable gears are only for people over forty-five. Isn't it better to triumph by the strength of your muscles than by the artifice of a derailer? We are getting soft...As for me, give me a fixed gear!"-- Henri Desgrange (31 January 1865 - 16 August 1940)

fixed frame sizing

Old 10-22-06, 03:36 PM
  #1  
Member
Thread Starter
 
Join Date: Jan 2006
Posts: 26

Bikes: old peugeot coversion, de bernardi

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
fixed frame sizing

hi all, i ride a peugeot road frame that i converted into a fixed gear over a year ago. i ride it every day and love it, everything feels great. now i'm planning on buying a frame that is actually pretty nice (a debernardi thron track) and seeing as i'm laying out quite a lot of cash (at least for me) i want to make sure the sizing is right. there aren't any shops around me that carry the bike so i'm going to get it online. anyway i'm just curious about the sizing. when i measured my current frame it came out as 55 cm (CC) seat tube and 56 top tube. that seems to correspond nicely with debernardi's 55 which has the same two dimensions. so do you reckon i should go ahead with that frame or is there something specific to the geometry of this bike (or track frames in general) that should make me opt for the 53 (which is what various sizing charts, and other threads seem to indicate. i'm 5'9 and have a 31-32 inseam. keep in mind this bike will be used almost entirely on the road, i'm not a racer, but don't want to be riding a boat.

thanks
alexcm is offline  
Old 10-22-06, 07:11 PM
  #2  
Member
Thread Starter
 
Join Date: Jan 2006
Posts: 26

Bikes: old peugeot coversion, de bernardi

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
check that. that peugeot i was talking about. it just got stolen. minutes ago. so now i definitely am getting a new bike.
alexcm is offline  
Old 10-22-06, 07:33 PM
  #3  
crotchety young dude
 
el twe's Avatar
 
Join Date: Jan 2005
Location: SF, CA
Posts: 4,818

Bikes: IRO Angus; Casati Gold Line; Redline 925; '72 Schwinn Olympic Paramount

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by alexcm
check that. that peugeot i was talking about. it just got stolen. minutes ago. so now i definitely am getting a new bike.
Wow. **** sucks.
__________________
Originally Posted by CardiacKid
I explained that he could never pay me enough cash for the amount of work I had put into that bike and the only way to compensate me for it was to ride the hell out of it.
IRO Angus Casati Gold Line
el twe is offline  
Old 10-22-06, 07:42 PM
  #4  
Plum Smuggler
 
Batson's Avatar
 
Join Date: Sep 2006
Location: NYC (Hells Kitchen)
Posts: 320

Bikes: Bianchi Pista, EAI Bareknuckle

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by alexcm
check that. that peugeot i was talking about. it just got stolen. minutes ago. so now i definitely am getting a new bike.
story please.
Batson is offline  
Old 10-22-06, 08:00 PM
  #5  
Senior Member
 
Join Date: Sep 2005
Location: Chicago
Posts: 190

Bikes: Trek 520, Fuji Track, Vicini Road

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
OMG that sucks big time. The guy at my LBS just told me yesterday that one should get a track frame that is 2 sizes smaller than one normally rides. Is this total BS? I am wondering the same thing myself.
Dersu Burrows is offline  
Old 10-22-06, 08:01 PM
  #6  
Member
Thread Starter
 
Join Date: Jan 2006
Posts: 26

Bikes: old peugeot coversion, de bernardi

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
left it locked outside my dining hall for like 15 minutes. came back. it's gone. ahh it's damned sad. it wasn't even that nice a bike, nothing too impressive. but still, i had built it up over time and it was my first fixie.
alexcm is offline  
Old 10-22-06, 09:51 PM
  #7  
aal
Senior Member
 
Join Date: Oct 2006
Posts: 110
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Re post 5, I was told recently that a lot of people go down one size on a track bike.
aal is offline  
Old 10-22-06, 11:22 PM
  #8  
Member
Thread Starter
 
Join Date: Jan 2006
Posts: 26

Bikes: old peugeot coversion, de bernardi

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
hmm yeah i'm thinking i'm going to go for the 53. that's what it seems like other people of similar size are riding. now i just need to buy a whole slew of new parts.
alexcm is offline  
Old 10-22-06, 11:26 PM
  #9  
Makeshift
 
kbjack's Avatar
 
Join Date: Mar 2006
Location: Ann Arbor, MI
Posts: 618

Bikes: 2002 Bianchi Vigorelli, 2002 S-works CX, 1973 Raleigh Super Course conversion, 1979 Raleigh Competition, 1973 Raleigh Professional Track, 1980 Austro Daimler Inter-10

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
The bottom bracket on a track frame is usually somewhat higher than on road frames, in order to prevent pedal strike. This can mean an increase in standover height, but IMO not enough to warrant sacrificing good riding position. Stick to the measurements that work for you and don't worry about it.
kbjack is offline  
Old 10-22-06, 11:57 PM
  #10  
King of the Hipsters
 
Join Date: Jan 2005
Location: Bend, Oregon
Posts: 2,128

Bikes: Realm Cycles Custom

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times in 2 Posts
I have the same inseam as alexcm (32") but I stand 6'2" tall.

So, I have short legs and a long body.

I ride a Bianchi Pista.

For stand over height I went one size smaller, 59cm, than I would have otherwise.

It helps that the Pista has a slightly sloping top tube.

In order to get the distance from handlebars to saddle that I needed, without putting too much weight on my front wheel, I got a setback seatpost (35mm) and I feel centered over the bike with a 90mm stem.

Too bad your bike got stolen, 'cause you could have taken measurements from the pedals to the saddle, from the saddle to the handlebars, and from the crank bearing to a vertical line directly under your saddle.

As kbjack notes, fixed gear bikes have higher bottom brackets.

How amazing that alexcm and I have the same inseam and such a difference in height.
Ken Cox is offline  
Old 10-23-06, 06:07 AM
  #11  
He drop me
 
Grasschopper's Avatar
 
Join Date: Jul 2004
Location: Central PA
Posts: 11,664

Bikes: '03 Marin Mill Valley, '02 Eddy Merckx Corsa 0.1, '12 Giant Defy Advance, '20 Giant Revolt 1, '20 Giant Defy Advanced Pro 1, some random 6KU fixie

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 138 Post(s)
Liked 12 Times in 9 Posts
Talk about this sizing thing. My LBS was telling me to get one size LARGER. I currently ride a 54cm Specialized Roubaix and they have Langsters in both 54cm and 56cm. I thought I was golden as the 54 is an 05 and they would let it go for a song but then one of the guys I actually trust at this shop told me it would probably be too small. His reasoning was that the larger bike would get me in a better position to deal with the high cadances that you get on a fixie...more room for the thighs to not hit the chest (or belly) and more room for extra clothes (thinking of going fixie for the winter slop less main factor).

Thoughts?

Also my LBS does Giant, Specialized and Cannondale...so my picks from them are the Bowery, Langster and the Capo. The C'Dale is more than I want to spend and the word on the Bowery is that the frame looks like crap (really cheap welds even by Giant's standards)...which leave the Langster. I was also thinking IRO since they are only like 60 min down the road I can pick it up...but the cost will be like $100-$175 more than the Langster.
__________________
The views expressed by this poster do not reflect the views of BikeForums.net.
Grasschopper is offline  
Old 10-23-06, 07:22 AM
  #12  
Member
Thread Starter
 
Join Date: Jan 2006
Posts: 26

Bikes: old peugeot coversion, de bernardi

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
well does anyone know anything about the de bernardi in particular? anyone with comparable size riding around the street on a 55 or 53?
alexcm is offline  
Old 10-23-06, 07:41 AM
  #13  
Senior Member
 
shishi's Avatar
 
Join Date: May 2003
Location: brooklyn, NY
Posts: 1,290

Bikes: Sparton(custon track), Fuji

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I am 5'10 w/ 32 inseam. Both of my track rides are 54s. Stick with the one that has the closest dim. to your previous ride.
shishi is offline  
Old 10-23-06, 02:26 PM
  #14  
Member
Thread Starter
 
Join Date: Jan 2006
Posts: 26

Bikes: old peugeot coversion, de bernardi

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
just ordered a 53cm from debernardi. should arrive in a few days. no better way to take my mind off my old bike...
alexcm is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.