Go Back  Bike Forums > Bike Forums > Singlespeed & Fixed Gear
Reload this Page >

Not just another chain tensioner question?

Notices
Singlespeed & Fixed Gear "I still feel that variable gears are only for people over forty-five. Isn't it better to triumph by the strength of your muscles than by the artifice of a derailer? We are getting soft...As for me, give me a fixed gear!"-- Henri Desgrange (31 January 1865 - 16 August 1940)

Not just another chain tensioner question?

Old 06-28-07, 04:11 PM
  #1  
Senior Member
Thread Starter
 
Join Date: Apr 2006
Location: Ohio
Posts: 654

Bikes: vintage Raleigh

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Not just another chain tensioner question?

Well . . . kinda. Anyway, I am looking for the best suited chain tensioner for my single speed road bike that will let me use two gears (one for flats and the other for hills) on my rear cassette. I am riding a conversion and don't have the funds for a flip/flop wheel. The rear cogs I am using have a two tooth (wow, say that fast ten times) difference, so I guess the chain tensioner I need has to be able to adjust for that. I am currently using a derailluer (no cable) with a longer adjusting screw to align between the two gears. I currently have the two gears spaced out on the cassette where they both align just inside and outside of the front ring. Do you think that with a standard chain tensioner I will drop the chain with this kind of setup? Perhaps the Paul Components Melvin will work? Thanks all.
bfloyd is offline  
Old 06-28-07, 04:15 PM
  #2  
Utilitarian Boy
 
Gyeswho's Avatar
 
Join Date: Jun 2006
Location: Bronx, NY
Posts: 3,235

Bikes: Check the sig to find out

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 4 Times in 4 Posts
really i think you should just pick one gear you like and go for that only. i hear those chain tensioners really aren't that great so just save up for the wheel in the mean time

* go for the one with the better chainline
Gyeswho is offline  
Old 06-28-07, 04:22 PM
  #3  
Senior Member
 
Join Date: Sep 2006
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
are their any chain tensioners for vertical dropouts?
Sergio yeah is offline  
Old 06-28-07, 04:32 PM
  #4  
Senior Member
 
Join Date: Mar 2007
Posts: 5,737
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 147 Post(s)
Likes: 0
Liked 8 Times in 8 Posts
Originally Posted by bfloyd
Well . . . kinda. Anyway, I am looking for the best suited chain tensioner for my single speed road bike that will let me use two gears (one for flats and the other for hills) on my rear cassette. I am riding a conversion and don't have the funds for a flip/flop wheel. The rear cogs I am using have a two tooth (wow, say that fast ten times) difference, so I guess the chain tensioner I need has to be able to adjust for that. I am currently using a derailluer (no cable) with a longer adjusting screw to align between the two gears. I currently have the two gears spaced out on the cassette where they both align just inside and outside of the front ring. Do you think that with a standard chain tensioner I will drop the chain with this kind of setup? Perhaps the Paul Components Melvin will work? Thanks all.
Chuck the chain tensioner. White Industries has an Eno Eccentric hub that will allow you to run a fixed gear setup with vertical dropouts. So why bother with a kludgy chain tensioner? Besides the bike looks nicer without one.

Last edited by NormanF; 06-28-07 at 04:40 PM.
NormanF is offline  
Old 06-28-07, 04:33 PM
  #5  
Senior Member
 
Join Date: Jan 2007
Location: Sacramento
Posts: 1,013
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
One option is to use a ratio that will not change your wheel position.

I have a dos eno freewheel that has 2 speeds 16/19. In the front I have a 45T and a 42T chainring. The chain length on the 16/45 and the 19/42 is the same. I can switch back and fourth between the two and I the position in the dropouts is the same and I don't have to fiddle with the brake pad position. An added bonus is that both chainlines are nearly perfect.

Granted I have horizontal dropouts so it is less of a problem if it is not perfect, but it also gives me a really good range of gears,.... something for the flats and something for the hills.

In this way, which is especially easy with a cassette conversion, your chain tensioner can remain fixed and still work perfectly.
Hirohsima is offline  
Old 06-28-07, 04:37 PM
  #6  
hello
 
roadfix's Avatar
 
Join Date: May 2003
Location: Los Angeles
Posts: 18,684
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 191 Post(s)
Liked 109 Times in 48 Posts
Originally Posted by Sergio yeah
are their any chain tensioners for vertical dropouts?
They're not talking about chain tugs.
roadfix is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.