new cranks.
 

after crashing yesterday, i am looking for some new cranks. to make a long story short, i clipped my pedlal while turning and it bent which stripped all the threads out of my pedal boss on my crank. the cranks i have right now are sugino vp's, and what i am wondering is should i just buy aother pair of the same cranks ( luckily i found a set on ebay) or do you have any suggestions or do you have any suggestions for cranks of the same dimensions for around 50 dollars ? this is the model.

http://cgi.ebay.ca/VINTAGE-SUGINO-VP...QQcmdZViewItem

well, people say used sugino 600's are good. note: if you had pedal strike, maybe try going to 165mm, that would help a little bit. also, if you want new, sugino rd's can be had for ~55 (check aebike, they are cheap.)

you should probably go with 165 if pedal strike ruined your last pair

woud sugino rd,s have the same spacing and bccd?

Shimano 600's.

im looking for cranks that will be a direct replacment, no need t change the bb or sprocket or anything

any jis square taper road double should do then (which the 600 is)...

is there any way to fix this so that i can ride while i wait for my cranks? it didnt strip ll the threads, just a few.