What brands/models for a conversion?
#1
Pedestrian Like
Thread Starter
Join Date: Apr 2006
Location: Las Vegas
Posts: 418
Bikes: 2005 LeMond Big Sky SL
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked 0 Times
in
0 Posts
What brands/models for a conversion?
Hi,
I am thinking of doing a conversion of a 70/80's roadbike to single speed and was wondering what brands or models of bikes I should be looking for? Or avoiding? I will be going the craigslist/pawnshop/garage sale route of finding one to convert.
Thanks.
I am thinking of doing a conversion of a 70/80's roadbike to single speed and was wondering what brands or models of bikes I should be looking for? Or avoiding? I will be going the craigslist/pawnshop/garage sale route of finding one to convert.
Thanks.
#3
F'ing A
Join Date: Oct 2007
Location: SJ
Posts: 321
Bikes: 08 tommaso augusta, 88 specialized sirrus, random cruisers and stuff
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Anything with horizontal drop outs is fine. Google sheldon brown and read his page on fixed gear bikes to get a better idea.
#4
Lotion/Basket/Hose
Join Date: Apr 2004
Location: Chicago
Posts: 1,368
Bikes: 1992 Schwinn Paramount
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
You're likely to discover that Fujis, Univegas, Schwinns, Miyatas and Panasonics are the most common road bikes for sale for cheap. All make good conversions, and usually show up on CL or eBay already stripped-down to the frame+fork for cheap. Save the complete road bikes for those who actually want to ride a bike with gears, of which there are plenty (contrary to some of those in this forum). Since a stripped-down road bike frame's already suffered the indignity of having its shifters and derailleurs removed, I see no problem with building it back up as a SS/FG. You can find the necessary parts for amazingly cheap, so take that for what you will.
#5
stay free.
Join Date: Dec 2007
Location: Ellensburg, WA
Posts: 1,557
Bikes: EAI Bare Knuckle, 1980's Ross Signature 292s 12 speed
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
As was mentioned before, something with horizontal dropouts. Schwinns and raleighs seem really popular. If you get one with a cottered crank bottom bracket make sure you get something with a bottom bracket shell which you can easily get replacements for. Some pugeuts have french Bottom brackets, which will prove difficult to swap if they dont have a square taper bottom bracket in them. That said pugeuts make beautiful conversions if you get one with an english bottom bracket. Fujis and Univegas were mentioned before and make good conversions. I would just find one you like that fits you. I have a pinnacle which I converted, I've only found one other one on velospace (its an old sears brand I guess) but I payed 5 dollars for the complete bike from a thrift store and I really like the bars that were on it. A lot of people like lugged frames so if thats your style you could look into that. It seems if you cruise yard sales and thrift stores plenty of options will pop up.
#6
jerk store
Join Date: Mar 2006
Location: Boston
Posts: 605
Bikes: '80s Chimo Garbage fixed 36/14, Centurion fixed 42/17
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Read Sheldon's glossary entry on forged vs. stamped dropouts. Look for something with forged, horizontal dropouts. Forged dropouts are a good indication of quality when you don't know what else to look for.
#7
end of biters
Join Date: Aug 2007
Location: East Lansing
Posts: 833
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
^ +1. Trying to shop by brand can be misleading, because lots of these companies made some pretty crappy bikes during the boom of the 70s and 80s. Also, this might seem to go without saying, but make sure you find a bike that is your size. If you get something nice that won't fit you well, you'll be worse off than if you were riding a bike made of gaspipes that fits you correctly. I know that when looking through the sea of 'vintage' 10 speeds out there it's easy to get pumped up when you find that Peugot in good condition with the hot paintjob and decide to overlook that it's not the right size.
#8
.
Join Date: Aug 2005
Location: Rocket City, No'ala
Posts: 12,764
Bikes: 2014 Trek Domane 5.2, 1985 Pinarello Treviso, 1990 Gardin Shred, 2006 Bianchi San Jose
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 62 Post(s)
Likes: 0
Liked 29 Times
in
14 Posts
Check out the Classic and Vintage forum for info on older bikes. Most of them there don't like the idea of old frames being converted to SS/FG but it's better than the scrap heap.
Treks, Miyatas, Univega, Panasonic, Bianchi, Schwinn, Bridgestone, Fuji, Raleighs (80's), Peugeots(80's), etc.
Forged dropouts are nice, any decal saying Reynolds, Columbus, Tange, True Temper will tell you what steel is being used. Plenty of good frames out there that aren't chromoly or 531, also plenty of "gaspipe" 70's boom bikes out there that aren't wort the trouble.
I've got a 70's Raleigh with the 68mm 26tpi bottom bracket so I got some axles from my LBS that have the same left side and middle measurements as the old cottered crank axle. Now I can hopefully use a newer, lighter crankset without having to retap the threads in the bracket.
I bought a cheap early 80's Peugeot mixte frame for my wife. It had a regular English bottom bracket but required a 24mm seatpost. I finally found one on eBay. It cost more than the frame. But worth it.
Treks, Miyatas, Univega, Panasonic, Bianchi, Schwinn, Bridgestone, Fuji, Raleighs (80's), Peugeots(80's), etc.
Forged dropouts are nice, any decal saying Reynolds, Columbus, Tange, True Temper will tell you what steel is being used. Plenty of good frames out there that aren't chromoly or 531, also plenty of "gaspipe" 70's boom bikes out there that aren't wort the trouble.
I've got a 70's Raleigh with the 68mm 26tpi bottom bracket so I got some axles from my LBS that have the same left side and middle measurements as the old cottered crank axle. Now I can hopefully use a newer, lighter crankset without having to retap the threads in the bracket.
I bought a cheap early 80's Peugeot mixte frame for my wife. It had a regular English bottom bracket but required a 24mm seatpost. I finally found one on eBay. It cost more than the frame. But worth it.
#9
winded
Join Date: Jan 2008
Location: Austin, TX
Posts: 38
Bikes: road bike, fixed gear
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
my fixed conversion was a 1978ish SR frame from japan...it fits perfect, and being chromoly, its nice and light. the parts i put on it were fairly nice parts, since i hate going the cheap way, and may make it onto a nicer frame if one comes my way in the near future.
#11
Pedestrian Like
Thread Starter
Join Date: Apr 2006
Location: Las Vegas
Posts: 418
Bikes: 2005 LeMond Big Sky SL
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked 0 Times
in
0 Posts
Thanks for the info everyone, much appreciated. I had already read up on Sheldon about dropouts but hadn't considered what problems bottom brackets might cause. Also, forged and stamped dropouts are new to me too so I'll read up on that. I used to ride my brothers Dawes bike with a 531 frame in the eighties, would be perfect for a conversion if he still had it. I figured that Raleigh would be something I would see a lot of, but being originally from England and living in the US now, I wasnt sure of what makes I could expect to find and what is quality.
bbattle, love the bike you put together for your wife. If I successfully complete a conversion, perhaps I'll try something similar for mine. Pink like that might make her ride it!
Thanks.
bbattle, love the bike you put together for your wife. If I successfully complete a conversion, perhaps I'll try something similar for mine. Pink like that might make her ride it!
Thanks.