Death Wish
Is it a Death Wish to ride a deep v rim that is 1/4" bent out of shape?
Or should I replace? |
I'm an engineering-doctor, and I think you will be fine.
|
Originally Posted by nathbdp
(Post 6035873)
Is it a Death Wish to ride a deep v rim that is 1/4" bent out of shape?
Originally Posted by nathbdp
(Post 6035873)
Or should I replace?
|
Originally Posted by jet sanchEz
(Post 6035915)
I'm an engineering-doctor, and I think you will be fine.
|
The wheel probably won't kill you. It will slow you down though, which is even worse.
|
you don't have brakes on there huh? so it won't rub the shoes? it's not rubbing your stays right? you don't mind a bumpy ride huh? well then ride it.
|
bent laterally or out of round? if it's the former, you can carefully straighten it with a rubber mallet.
|
Bent? Like out of true?
|
Inflate the tire up to 150ish PSI and smack the bent part on the ground as hard as you can*.
*Don't actually do this. |
Originally Posted by crushkilldstroy
(Post 6037567)
*Don't actually do this.
|
Originally Posted by blickblocks
(Post 6037537)
Bent? Like out of true?
i mean out of true |
If you true the wheel with terrible spoke tension it will quickly go out of true again. I've taken some pretty ****ed up rims to my knee and straightened them fairly well.
|
+1 for rubber mallet and re-truing.
...or mail it to me :D |
http://bostondirtdogs.boston.com/Hea...es/Bronson.bmp
Everyone else already pretty much answered your question so I figured i'd throw in a joke. hope someone gets it. |
I was sincerely hoping that this post was regarding the Bronson series. Bonus points for whoever can name what comes after the colon in Death Wish 5:
|
Originally Posted by ESinSF
(Post 6039882)
I was sincerely hoping that this post was regarding the Bronson series. Bonus points for whoever can name what comes after the colon in Death Wish 5:
|
Originally Posted by ESinSF
(Post 6039882)
I was sincerely hoping that this post was regarding the Bronson series. Bonus points for whoever can name what comes after the colon in Death Wish 5:
|
Originally Posted by nathbdp
(Post 6035873)
Is it a Death Wish to ride a deep v rim that is 1/4" bent out of shape?
Or should I replace? is charles bronson riding your bike? |
Whoa ! Bronson is a LEFTIST !
|
it's like killing cockroaches... you gotta kill 'em all or else what's the point?
|
Originally Posted by 666pack
(Post 6040864)
it's like killing cockroaches... you gotta kill 'em all or else what's the point?
|
it was referencing Bronson
I speak in movie titles all the time like, "Is that The Thing you were talking about?" or "How do you go about being The Professional in that business?" |
Yeah I know :) Just saw a chance to throw that one out there ;) (How often could someone use the "birth control for roaches" thing!) :lol:
|
When I was working on my winter bike, the only front 700c wheel I could come up with was off of a bike that got mowed over by a car. Needless to say it bent enough to rub against the fork. I jumped on it, and retentioned it so it wasn't so bad. I used to for about 3 months. I just rebuilt a new front wheel.
|
Smack it on the ground, preferably with a nice meaty CX tire on it. I've used all manner of ****ed up wheels after performing this kind of precision repair. Are you using rim brakes on this wheel? If not, as long you can get it reasonably close to true and it's not out of round, you can use the wheel forever.
|
All times are GMT -6. The time now is 09:53 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.