single speed conversion HELP
#1
Junior Member
Thread Starter
Join Date: Apr 2008
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
single speed conversion HELP
so, i have an old threaded free wheel roadbike with horizontal drop outs, but it has a one piece crank (ashtabula)
am i correct in thinking that i can replace the 1 piece crank with a 3 piece crank if i put in some adapters to fill the extra large hole that remains in the frame?
i am thinking that i can run a 1/8 chain with 16:42 gearing onto a bmx crankset, to keep the chainline tight.
does a 42 tooth chain ring on a bmx crankset with 1/8 chain onto a 16 tooth rear sprocket seem like it could work?
am i correct in thinking that i can replace the 1 piece crank with a 3 piece crank if i put in some adapters to fill the extra large hole that remains in the frame?
i am thinking that i can run a 1/8 chain with 16:42 gearing onto a bmx crankset, to keep the chainline tight.
does a 42 tooth chain ring on a bmx crankset with 1/8 chain onto a 16 tooth rear sprocket seem like it could work?
#2
Junior Member
Join Date: Jan 2008
Location: Madison, WI
Posts: 14
Bikes: 2009 Surly Long Haul Trucker - 1977 Sentinel Horizon (SS Conv) - 2010 Trek Fuel EX 8 - 2007 Trek Lime Lite - 2005 Redline Monocog (26") - 1981 Trek 710 - 2011 Raleigh RX1 - 1992 (?) Bianchi MTB (Winter Whip)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
yeah it could work. Since the frame you have came with single-piecers I'm guessing it's a cheap set up. You might want to consider finding a higher quality bike to convert if your willing to spend the dough on adapters and bmx cranks. Don't spend the money unless it's worth it, you'll be happier in the long run and will be able to sell it for more after the apocalypse...
#3
Senior Member
Join Date: Mar 2007
Location: West Dorset, UK
Posts: 908
Bikes: 1983 Dawes Galaxy, 2006 Raleigh Airlite, 1982 Sun Solo (fixed)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
yeah it could work. Since the frame you have came with single-piecers I'm guessing it's a cheap set up. You might want to consider finding a higher quality bike to convert if your willing to spend the dough on adapters and bmx cranks. Don't spend the money unless it's worth it, you'll be happier in the long run and will be able to sell it for more after the apocalypse...
__________________
A group for all Dawes Galaxy owners to give and recieve information about them
https://flickr.com/groups/dawes_galaxy/
i jam my thumbs up and back into the tubes. this way i can point my fingers straight out in front to split the wind and attain an even more aero profile, and the usual fixed gear - zen - connectedness feeling through the drivetrain is multiplied ten fold because my thumbs become one with the tubing.
https://flickr.com/groups/dawes_galaxy/
#4
Senior Member
Join Date: Jul 2006
Location: Ky. and FL.
Posts: 3,944
Bikes: KHS steel SS
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Me too, at least start with a frame with a 3 piece crank. For the price of an adapter you can probably find one.