![]() |
tire punctures
Hey guys, quick question for all you gurus out there.
I just changed over from riding my XC mountain bike to a fixie for in city stuff (I got a 2008 paddy wagon). The only problem is that the stock tires suck ass, and the streets still haven't been cleaned from all the gravel/glass/random stuff that leads to punctures. As such I ordered a pair of Conti ultragators, but they will take a week to get here (my LBS had them, but they cost twice as much, and I have no money). So my question is is there any way to reduce the amounts of flats I get now (Around 1 every 30 km)? I have the tires pumped up to 110 PSI, would reducing the pressure help? Thanks in advance. |
it sounds like your riding decent sized tires (as in width) since ur coming from XC...i think lowering the pressure would help a bit
|
My experience would say the tire pressure is good, maybe want a little more. You should check the tires to make sure debris isn't stuck in the tire causing repeated flats.
|
Installing Tuffy liners by rubber cementing them into place and duct taping the overlap seam. The rubber cement will make sure that they stay centered and will cause the Tuffy to stretch out into a shape that will stay in place even after the cement looses it's holding property. I have them on my road, utility, and cross bike and haven't had a flat for a very long time. Make sure you get the right size for your tire by comparing them side by side if you decide to get them. Also with liners on they make a good added cushion effect to a flat especially when bombing down a hill at 40mph; I know first hand. And besides I dislike buying countless replacement tubes and patches, trust me.
|
seems like i get flats a lot. i've been through two fronts front hitting debris. One was a metal spike that was inevitable.
|
more PSI more better :)
|
Check for bad rim tape (spokes causing flats) or a small burr on the inside of your rim. Short of that, the only free thing you can do is watch more carefully what you ride over and wait for your GatorSkins.
|
Originally Posted by rmwun54
(Post 6650089)
Installing Tuffy liners by rubber cementing them into place and duct taping the overlap seam. The rubber cement will make sure that they stay centered and will cause the Tuffy to stretch out into a shape that will stay in place even after the cement looses it's holding property. I have them on my road, utility, and cross bike and haven't had a flat for a very long time. Make sure you get the right size for your tire by comparing them side by side if you decide to get them. Also with liners on they make a good added cushion effect to a flat especially when bombing down a hill at 40mph; I know first hand. And besides I dislike buying countless replacement tubes and patches, trust me.
|
| All times are GMT -6. The time now is 09:59 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.