Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Singlespeed & Fixed Gear (https://www.bikeforums.net/singlespeed-fixed-gear/)
-   -   jumping on carbon (https://www.bikeforums.net/singlespeed-fixed-gear/421685-jumping-carbon.html)

tzusing 05-24-08 08:25 PM

i totally agree with you. i'm sick of seeing so much misinformation.
a track bike is meant for riding in a track. so why would the designers put layer upon layer of carbon on a fork that was meant to be used on a smooth surface velodrome. that is just ********. less layers of carbon equals lighter fork. and weight as many of you know is a major selling point for bikes.
if i wanted to make a strong carbon fork...just pile on the layers.
but yes for tricking i think a steel or alu fork would be much safer because of how they slowly break. unlike carbon that snaps.

4zn_balla 05-24-08 08:49 PM

i have a front spinergy and carbon fork and i ride hard on it. Both are fine. I should not that my fork is almost a gimmick carbon and it's mostly aluminum anyway.

anomaly 05-25-08 06:56 PM

I've spent about 6 months with a full carbon EC90 in DC, I do plenty of curb jumping, wheelies etc and I've noticed no issues with it. That being said the EC90 is one of the nicer carbon forks on the market so it is really well built. I wouldn't trust a low end one to hold up.

anomaly 05-25-08 06:58 PM

Old 4 spoke Spinergy scares me far more than a carbon fork made in the 3rd world...

bbattle 05-25-08 07:31 PM


Originally Posted by rickyaustin (Post 6754887)
It's pretty obvious I'm saying carbon forks can be strong. Don't be a jackass.

They can be. They can also fail spectacularly. I wouldn't have one on a bike I was using to hop curbs or ride down stairs on a daily basis.

On a muddy, sandy 'cross track with no drops, rocks, curbs, gutters or drunks to hop over, carbon fork should be okay. Especially if you've got the scratch to replace it regularly. Most hipsters complain of a lack of funds so my recommendation of steel fork stands.

breadbox 06-03-08 04:00 PM

Newman's fork is a Wound-up, which isn't your standard carbon fork. They're made by a composites company in Salt Lake City that makes military components. It's spun from a single filament of carbon rather than layed up like fiberglass. Not the same as Kia's Pista Concept.

Cynikal 06-03-08 04:10 PM

Woundups are generally stronger than the average carbon fork. I've seen them on several tandems. That being said, I don't think that I would do tricks on one.

freeskihp 06-03-08 05:48 PM


Originally Posted by 4zn_balla (Post 6755316)
i have a front spinergy and carbon fork and i ride hard on it.

http://pardo.net/bike/pic/fail-020/img/wheel.jpg

Ride Among Us 06-03-08 07:34 PM

i ride hard on both my bikes and they each have carbon forks. no problems.

dervish 06-03-08 07:53 PM

just be prepared to have another fork handy just incase


All times are GMT -6. The time now is 06:07 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.