Riding with hands on the stem?
#1
ahhhh
Thread Starter
Join Date: Jun 2006
Location: Santa Fe, NM
Posts: 173
Bikes: 95 Bianchi Timberwolf; 18 Specialized Stumpjumper; 20 Giant Defy 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Riding with hands on the stem?
I'm not a fixed rider, but I come to you guys because of an observation I found interesting.
Yesterday I passed four fixed riders (three separate incidents) that were riding with their hands on the very center of the bars, and I mean so their index fingers were touching over the stem. One guy even had his hands one on top of the other on the stem-bar joint. All four riders either had drop bars or bullhorn bars, not those short-and-straight bars I've seen some riding.
This isn't by far the first time I've seen this style of riding, but yesterday I just couldn't believe on my little 10-minute commute that I passed four people riding this way. In the past week I've noticed over a dozen, always fixed riders.
I guess I'm asking: is this a fad or something that's specifically catching on in fixed-gear circles? If so, what's the point? Just curious.
Yesterday I passed four fixed riders (three separate incidents) that were riding with their hands on the very center of the bars, and I mean so their index fingers were touching over the stem. One guy even had his hands one on top of the other on the stem-bar joint. All four riders either had drop bars or bullhorn bars, not those short-and-straight bars I've seen some riding.
This isn't by far the first time I've seen this style of riding, but yesterday I just couldn't believe on my little 10-minute commute that I passed four people riding this way. In the past week I've noticed over a dozen, always fixed riders.
I guess I'm asking: is this a fad or something that's specifically catching on in fixed-gear circles? If so, what's the point? Just curious.
#2
Senior Member
Join Date: Apr 2008
Posts: 764
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
This is funny. I have never seen another rider doing this, but on my commute I often do this (instinctively) because I feel that holding one hand toward the middle of the bar (near or on the stem) while resting the other hand elsewhere like on the hip is better for straight-line riding than keeping one hand to one end of the bar. The momentum of the bike keeps you moving straight without disruptive input if the one hand is placed on one side of the bar.
In fact, road bike racers tend look behind one shoulder by dropping one hand while placing the other hand toward the stem. This allows them to look back without veering.
In fact, road bike racers tend look behind one shoulder by dropping one hand while placing the other hand toward the stem. This allows them to look back without veering.
#3
unofficial
Join Date: Apr 2008
Location: san rafael, CA
Posts: 1,054
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
im not sure if its a fad, but i do know what you talking about, it doesnt really seem to have much of a point to it
#4
Utilitarian Boy
Join Date: Jun 2006
Location: Bronx, NY
Posts: 3,235
Bikes: Check the sig to find out
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
its just comfy this way for me. On a freewheel I'm on the sides. I think, for all who do ride fixed, it may have to do with the control you have on the bike. On a freewheel it's a different groove. maybe I'm wrong though:shrug: everyone rides different though and it'd be stupid to mimic if you're not comfy riding like that.
#5
Senior Member
Join Date: Feb 2008
Posts: 102
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
1. Aerodynamic
2. Mash guys do it.
Half joking.. but, I find myself doing it once in awhile.. Hate to say it, but I think I picked it up from watching MASH.
2. Mash guys do it.
Half joking.. but, I find myself doing it once in awhile.. Hate to say it, but I think I picked it up from watching MASH.
Last edited by 1150A; 06-08-08 at 10:49 PM.
#6
Senior Member
Join Date: May 2008
Location: Towson, MD
Posts: 361
Bikes: Windsor "The Hour"
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I've found myself doing the exact same thing at times. It just kinda comes naturally if I only have one hand on the bars
#7
is actually asian
Join Date: Mar 2008
Location: Milwaukee, WI
Posts: 309
Bikes: Leader
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
it started because riding on the tops of track drops is only possible this way. The curve begins very soon and the "top" section is short.
#9
Member
Join Date: Apr 2008
Posts: 41
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hey you're from Davis too!
Yeah, I see those guys all the time too around Davis. In my opinion, there are just a bunch of annoying fixed gear kids that do it just to look cool I guess. It is really annoying to see these hipster kids riding for the look.
Yeah, I see those guys all the time too around Davis. In my opinion, there are just a bunch of annoying fixed gear kids that do it just to look cool I guess. It is really annoying to see these hipster kids riding for the look.
Last edited by Jcrew689; 06-08-08 at 11:33 PM. Reason: Grammatical Errors
#10
ahhhh
Thread Starter
Join Date: Jun 2006
Location: Santa Fe, NM
Posts: 173
Bikes: 95 Bianchi Timberwolf; 18 Specialized Stumpjumper; 20 Giant Defy 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Heh, I know what you mean, there's a gathering that happens at lunch in front of the coffee house that's...whatever. Not my scene, but to each their own.
#11
ALL PARTY
Join Date: Dec 2007
Location: Niagara Falls, Ontario, Canada
Posts: 664
Bikes: Douglas Touring Cross Wise, Urbanite Fixed Gear
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I do it all the time. I feel I have a better power transfer from an upright position, and I feel that by putting my hands in the middle I am becoming more aero dynamic. I mostly do it when I want to pick up my speed, but when I want to continue at a certain pace, I go down to the drops.
#12
ahhhh
Thread Starter
Join Date: Jun 2006
Location: Santa Fe, NM
Posts: 173
Bikes: 95 Bianchi Timberwolf; 18 Specialized Stumpjumper; 20 Giant Defy 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
there are just a bunch of annoying fixed gear kids that do it just to look cool I guess.
#13
Needs to Ride More
Join Date: Jan 2008
Location: Long Beach, CA
Posts: 764
Bikes: 1996 Bianchi EL/OS, 1991 Miyata QuickCross
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I do it all the time. I feel I have a better power transfer from an upright position, and I feel that by putting my hands in the middle I am becoming more aero dynamic. I mostly do it when I want to pick up my speed, but when I want to continue at a certain pace, I go down to the drops.
#14
Senior Member
Join Date: Feb 2007
Location: CA
Posts: 545
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
if you don't have drops, riding with your hands like that is actually pretty aerodynamic.
on my work commute i often have a strong headwind on the ride home, and riding with my hands on the stem is much easier than on the grips.
on my work commute i often have a strong headwind on the ride home, and riding with my hands on the stem is much easier than on the grips.
#15
Track Tricyclist
Join Date: Aug 2007
Location: bay area
Posts: 546
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
i find that riding with my hands closer to the stem (when running drops/horns) gives me the greatest amount of torque i need to stop quickly while riding brakeless.
otherwise, it's a rather inefficient way to ride as when you put your hands inward from your shoulders, your lungs actually become cramped, and it is a little harder to breathe efficiently while riding.
otherwise, it's a rather inefficient way to ride as when you put your hands inward from your shoulders, your lungs actually become cramped, and it is a little harder to breathe efficiently while riding.
#16
Street Pharmacist
Join Date: Oct 2007
Location: the yay
Posts: 257
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
lol i know what you mean! buut personally i do it just because i constantly switch my hand positions on my bars during long rides :x i dont have it on the stem 24/7.. (i ride bullhorns). I don't know whether it's a habit but yeah.. but my guess is that most people grip their bars like that b/c it looks cool.
#17
Senior Member
Join Date: Jan 2008
Posts: 86
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Peace
#18
Bicycle Repair Man !!!
The only time I find myself doing this is on my path racer when I ride one handed... it has a long stem which makes a good place to put one's hand but never ride like this when I am using both hands.
#19
Member
Join Date: Apr 2008
Posts: 41
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Sorry about that guys.
Honestly, I've always wondered too why people ride like that. I've tried it a couple times but I'm not too keen in riding in that position because with me I feel a bit unstable but if it works for some of you guys then I apologize for any offense.
Honestly, I've always wondered too why people ride like that. I've tried it a couple times but I'm not too keen in riding in that position because with me I feel a bit unstable but if it works for some of you guys then I apologize for any offense.
#20
ALL PARTY
Join Date: Dec 2007
Location: Niagara Falls, Ontario, Canada
Posts: 664
Bikes: Douglas Touring Cross Wise, Urbanite Fixed Gear
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
But not my power transfer. Thats why I speed up on the tops, and keep my speed in the drops.
Riding in the drops is uncomfortable to do full time for me, and I can't get going all that fast right away in them. I usually right in the hoods when I'm starting to go, then near the stem when I'm increasing that speed, then in the drops when I want to hold that speed.
Riding in the drops is uncomfortable to do full time for me, and I can't get going all that fast right away in them. I usually right in the hoods when I'm starting to go, then near the stem when I'm increasing that speed, then in the drops when I want to hold that speed.
#22
Simple Gardener
Join Date: May 2008
Location: Fort Collins, Colorado
Posts: 23
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
thats hilarious! I was in a bike shop about a month ago when a guy brought his fixie in and asked to borrow a hacksaw. He did this to his drops, but failed to put on any grips... Hopefully he had some at home or something...
#23
Senior Member
Join Date: Dec 2007
Posts: 413
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
But not my power transfer. Thats why I speed up on the tops, and keep my speed in the drops.
Riding in the drops is uncomfortable to do full time for me, and I can't get going all that fast right away in them. I usually right in the hoods when I'm starting to go, then near the stem when I'm increasing that speed, then in the drops when I want to hold that speed.
Riding in the drops is uncomfortable to do full time for me, and I can't get going all that fast right away in them. I usually right in the hoods when I'm starting to go, then near the stem when I'm increasing that speed, then in the drops when I want to hold that speed.
I never ride with my hands up against the stem. I think it's uncomfortable. I put the clamp for my light there (on the handlebars right next to the stem).
#24
Senior Member
Join Date: Apr 2008
Posts: 764
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
To be clear, I ride this way for only several seconds, and only when I want to drop the other hand to relax it, or place it on the hip for a few seconds. Continually riding this way is biomechanically inefficient and offers no advantage beyond resting an arm or allowing you to glance back behind your shoulder while maintaining a straight line.
Beyond this, it's done only for fashion.
Beyond this, it's done only for fashion.
#25
skinning up
Join Date: Jul 2006
Location: cleveland
Posts: 1,243
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts