Fixed/Free vs. Fixed/Fixed vs. Fixed Hub
#1
spins pedals
Thread Starter
Join Date: Apr 2008
Location: Boston, MA
Posts: 76
Bikes: 2009 Orange Kilo TT Custom Built Fixed-Gear, 2009 Bianchi Volpe, 1970's Takara Fixed Gear Conversion
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Fixed/Free vs. Fixed/Fixed vs. Fixed Hub
Hello all,
I'm thinking about purchasing my first quality fixed gear bicycle after messing around with my troublesome conversion for some time. I'm thinking of getting an Iro Mark V and uncertain what hub type would be best.
First off, is there any advantage to a hub that only can have one cog/freewheel, aside from weight?
Secondly, what should I consider when choosing between fixed/fixed and fixed/free?
I'm planning on always riding fixed. I know there is that "if you are tired you can switch it to the freewheel" thing. This bike is going to be my primary means of transportation and commuter, so that could be useful. I'm going to only have a front brake though, as I intend to ride fixed as long as I am physically able to. Is this "safe enough?"
Having fixed/fixed might be nice if I ever want to go into a higher gear (If I get an Iro it'll be 46x17 stock). I'm going to be in a city though, so I don't know if I'd ever really care to flip to a smaller cog. Another good thing I can think of is if I ever strip my threads on one side I can still ride fixed on the other, and not need a brand new hub. How likely is stripping threads on wheels of Iro quality?.
Thoughts?
I'm thinking about purchasing my first quality fixed gear bicycle after messing around with my troublesome conversion for some time. I'm thinking of getting an Iro Mark V and uncertain what hub type would be best.
First off, is there any advantage to a hub that only can have one cog/freewheel, aside from weight?
Secondly, what should I consider when choosing between fixed/fixed and fixed/free?
I'm planning on always riding fixed. I know there is that "if you are tired you can switch it to the freewheel" thing. This bike is going to be my primary means of transportation and commuter, so that could be useful. I'm going to only have a front brake though, as I intend to ride fixed as long as I am physically able to. Is this "safe enough?"
Having fixed/fixed might be nice if I ever want to go into a higher gear (If I get an Iro it'll be 46x17 stock). I'm going to be in a city though, so I don't know if I'd ever really care to flip to a smaller cog. Another good thing I can think of is if I ever strip my threads on one side I can still ride fixed on the other, and not need a brand new hub. How likely is stripping threads on wheels of Iro quality?.
Thoughts?
#2
Team Beer
Join Date: Apr 2004
Location: Sacramento CA
Posts: 6,339
Bikes: Too Many
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 159 Times
in
104 Posts
There really is no reason for a free/fixed hub. You can put a freewheel on the fixed side so just get a fixed/fixed and have more options.
__________________
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
#3
hello
#4
Senior Member
Join Date: Jun 2003
Posts: 997
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
you can put a fixed cog on the freewheel side. Many here will gasp, and banty-about 'suidicide hub', and promote pounds of loctite, and talk about their 'friend who unspun a cog and was run over by a bus', but for most applications simply screwing on the cog is fine......especially if its just your 'backup' side.
Conversely, you can certainly put a freewheel on a fixed hub without any issues whatsover.
take your pick.
Conversely, you can certainly put a freewheel on a fixed hub without any issues whatsover.
take your pick.
#5
hello
you can put a fixed cog on the freewheel side. Many here will gasp, and banty-about 'suidicide hub', and promote pounds of loctite, and talk about their 'friend who unspun a cog and was run over by a bus', but for most applications simply screwing on the cog is fine......especially if its just your 'backup' side.
Conversely, you can certainly put a freewheel on a fixed hub without any issues whatsover.
take your pick.
Conversely, you can certainly put a freewheel on a fixed hub without any issues whatsover.
take your pick.
#6
Bicycle Repair Man !!!
I run three flip flop hubs and all are fixed / fixed... I just don't enjoy riding ss as much as I do fixed and that extra low gear comes in handy when the weather goes sideways (we get a lot of wind) or one simply wants to take it easy.
#8
:)
Join Date: Nov 2006
Location: duluth
Posts: 3,391
Bikes: '07 Pista, '09 Fantom Cross Uno, '8? Miyata, '67 Stingray, '0? Zoo mod trials, Tallbike, Chopper, '73 Schwinn Collegiate, '67 Triumph Chopper, '69 CB350, '58 BSA Spitfire, '73 CB450
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Fixed/Fixed is nice when you throw a chain and end up un-rotofixin' your cog and blowing the lockring threads off at 20mph.
Instead of having to rebuild the wheel around a new hub, I just put the cog on the other side and kept on riding.
Instead of having to rebuild the wheel around a new hub, I just put the cog on the other side and kept on riding.
#9
asleep at the wheel
Join Date: Aug 2004
Location: Chicago
Posts: 976
Bikes: Custom Richie Ditta Track Bike, Eddie Merckx Corsa, Marioni Custom Pista, Dolan Cyclocross
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I pretty much always go fixed/fixed:
a) As described above, can run a freewheel on the fixed side (though check you're engaging enough threads).
b) Nice to have a 'spare' side should you damage the threads at all
c) If you ever go racing, can have your road/warm-up gear on one side and racing gear on the other
d) But for me the clincher is really that you get the potential for a stronger wheel because you have same spoke length on both side and a symmetric hub - there are no dishing issues with fixed/fixed.
Much easier to build and get the tension balanced etc.
a) As described above, can run a freewheel on the fixed side (though check you're engaging enough threads).
b) Nice to have a 'spare' side should you damage the threads at all
c) If you ever go racing, can have your road/warm-up gear on one side and racing gear on the other
d) But for me the clincher is really that you get the potential for a stronger wheel because you have same spoke length on both side and a symmetric hub - there are no dishing issues with fixed/fixed.
Much easier to build and get the tension balanced etc.
#10
Senior Member
Join Date: Jun 2003
Posts: 997
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
??? Same's true with fixed/free, free/free, fixed/nothing and free/nothing. ?
#11
spins pedals
Thread Starter
Join Date: Apr 2008
Location: Boston, MA
Posts: 76
Bikes: 2009 Orange Kilo TT Custom Built Fixed-Gear, 2009 Bianchi Volpe, 1970's Takara Fixed Gear Conversion
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thank you everyone for helping. I'm positive I'd like a fixed/fixed now.
#12
Nymphomaniactionhero
Join Date: Nov 2007
Location: Baltimore, MD
Posts: 496
Bikes: 07' Specialized Langster Comp, 04' Bianchi Pista Concept
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 6 Times
in
4 Posts
+1 for the fixed/fixed. I still cant believe people can run a fixed cog on a freewheel thread hub suicide style and run no brakes. You all must live on flat plains and weight 120lbs and/or run brakes.
#13
cab horn
Join Date: Jun 2004
Location: Toronto
Posts: 28,353
Bikes: 1987 Bianchi Campione
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Likes: 0
Liked 26 Times
in
19 Posts
you can put a fixed cog on the freewheel side. Many here will gasp, and banty-about 'suidicide hub', and promote pounds of loctite, and talk about their 'friend who unspun a cog and was run over by a bus', but for most applications simply screwing on the cog is fine......especially if its just your 'backup' side.
Give me a ****ing break.
#14
Bicycle Repair Man !!!
Two of my fixed gear bikes have proper double stepped hubs and are fixed and fixed, one has a fixed / fixed set up on a double sided bmx "suicide" hub, and my longest serving fixed gear has been rocking a suicide hub for over 8000 km with no problems whatsoever.
Just screwing the cog on is really bad advice as if you are gonna rock a suicide hub you had better do it right and run a brake.
My biggest complaint with suicide hubs (if they are built up right) is that cog changes require a blowtorch and 3 guys to remove the cog... at least mine do.
I'll be building up a few more double stepped track hubs simply because I like being able to service a bike without needing a torch and a few friends who always insist on being paid in beer.
Just screwing the cog on is really bad advice as if you are gonna rock a suicide hub you had better do it right and run a brake.
My biggest complaint with suicide hubs (if they are built up right) is that cog changes require a blowtorch and 3 guys to remove the cog... at least mine do.
I'll be building up a few more double stepped track hubs simply because I like being able to service a bike without needing a torch and a few friends who always insist on being paid in beer.
#15
Bicycle Repair Man !!!
I got in a few thousand feet of climbing on my commute today.
#16
straight krushin'
Join Date: Jul 2008
Location: San Diego, CA
Posts: 39
Bikes: RiGi track bike, Mercier beater, Schwin monster
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The only reason for fixed one side for commuting is for looks... it just looks better, may not be practical.
I ride down some steep hills to get to work and never use my brake, but I use a front brake in emergancies... haven't used it since I learned level skids, but I work with cops and they would give me s**t and a ticket if I didn't have a brake.
I ride down some steep hills to get to work and never use my brake, but I use a front brake in emergancies... haven't used it since I learned level skids, but I work with cops and they would give me s**t and a ticket if I didn't have a brake.
#17
Senior Member
Join Date: Jun 2003
Posts: 997
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Almost the crappiest advice i've seen this week on bikeforums. If you're going to get a hub, get a ****ing hub that is fixed fixed. Freewheel on a fixed side is about 99999999999999999999%, safer than a fixed on a freewheel section with no provision for a proper lockring.
Give me a ****ing break.
Give me a ****ing break.
#18
Senior Member
Join Date: Jun 2003
Posts: 997
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Disagree. Chainwhip, vice, and turning the wheel (as opposed to the cog). I have a freewheel hub I used for twenty years w/countless cogs
#19
Bicycle Repair Man !!!
stevo - I use industrial strength 272 loctite... it has to be heated before it releases.
And I use a chain whip and turn the wheel.
I've built a of of suicide hubs at our shop (a co-op) with / for different folks and no-one has experienced any problems... once the hub has been assembled it is crucial to wait at least 24 hours to allow the loctite to set up properly.
Issues arise when people build them and ride them right away and don't run a brake... I won't build any fixed gear unless it has a brake and seeing brakeless riders here (on any fixed gear) is pretty uncommon.
As it is... I am looking forward to building a good number of new wheels for myself and a bunch of other folks as a proper hub / wheel is still the best way to go.
And I use a chain whip and turn the wheel.
I've built a of of suicide hubs at our shop (a co-op) with / for different folks and no-one has experienced any problems... once the hub has been assembled it is crucial to wait at least 24 hours to allow the loctite to set up properly.
Issues arise when people build them and ride them right away and don't run a brake... I won't build any fixed gear unless it has a brake and seeing brakeless riders here (on any fixed gear) is pretty uncommon.
As it is... I am looking forward to building a good number of new wheels for myself and a bunch of other folks as a proper hub / wheel is still the best way to go.
#21
Senior Member
Join Date: May 2008
Location: Towson, MD
Posts: 361
Bikes: Windsor "The Hour"
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Is loctite required to put a fixed cog on a freewheel side, or can a lockring be used and work fine?
I'm considering throwing my 16t on my freewheel side, so I can just flip it over in the event of a longer distance ride.. I won't be skidding with that side!
I'm considering throwing my 16t on my freewheel side, so I can just flip it over in the event of a longer distance ride.. I won't be skidding with that side!
#22
Team Beer
Join Date: Apr 2004
Location: Sacramento CA
Posts: 6,339
Bikes: Too Many
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 159 Times
in
104 Posts
Just thread it on as long as you have a brake on your ride. Folks here can be a bit alarmist about stuff.
__________________
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
#23
Senior Member
Join Date: May 2008
Location: Towson, MD
Posts: 361
Bikes: Windsor "The Hour"
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#24
ALL PARTY
Join Date: Dec 2007
Location: Niagara Falls, Ontario, Canada
Posts: 664
Bikes: Douglas Touring Cross Wise, Urbanite Fixed Gear
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I wish I was fixed/fixed. A single speed back wheel is dirt cheap, and as these guys are saying, you can apparently put a freewheel on a fixed side. It'd be great to run a 43x13 and 43x16
#25
Senior Member
Join Date: Nov 2004
Posts: 2,544
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Personally I wouldn't ride for any significant amount of time on a cog without a proper lockring. But that is just me.
If you have a choice between hubs, always go with the fixed/fixed unless you have a really good reason to do otherwise. All else being equal fixed/fixed gives you the most versatility. You can safely use both cogs/lockrings and freewheels on fixed-threading. Using a cog on freewheel threading in certain circumstances (riding brakeless for example) is dangerous.
If you have a choice between hubs, always go with the fixed/fixed unless you have a really good reason to do otherwise. All else being equal fixed/fixed gives you the most versatility. You can safely use both cogs/lockrings and freewheels on fixed-threading. Using a cog on freewheel threading in certain circumstances (riding brakeless for example) is dangerous.