Thomson Elite with Nitto RB021? Help fixie noob
#1
Member
Thread Starter
Join Date: Jan 2009
Posts: 40
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thomson Elite with Nitto RB021? Help fixie noob
I was just wanted to make sure does the Nitto RB021 fit onto the Thomson Elite?
I bought the decal less Mercier Kilo TT and decided to go threadless...
Also, will the Thomson Elite fit onto the stock fork? I think the stock fork is listed as 1 in and the Thomson stem is like 1 1/8...will that be a problem?
Thanks for the help in advance!
I bought the decal less Mercier Kilo TT and decided to go threadless...
Also, will the Thomson Elite fit onto the stock fork? I think the stock fork is listed as 1 in and the Thomson stem is like 1 1/8...will that be a problem?
Thanks for the help in advance!
#2
Senior Member
Join Date: Apr 2008
Posts: 1,041
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
You will need a stem shim to fit the 1" steerer, can't tell you any more unless you tell us what size is the clamp area on the stem you bought. if its 25.4 you will fit the bars straight on but if its 26 you will need another shim, or make one from an aluminum can.
#4
Swagga'
Join Date: Aug 2008
Location: OR
Posts: 16
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The RB-021's are 26mm actually but yeah I'm pretty sure the elite stem is 26mm also.
#6
Senior Member
Join Date: Apr 2008
Posts: 1,041
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#7
Member
Thread Starter
Join Date: Jan 2009
Posts: 40
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Ok so the Nitto RB021 fits onto Thomson elite...
Now my question is, will the Thomson elite fit onto the stock fork of the mercier kilo tt frameset?
The clamp is 1 1/8 but the stock fork is 1, will it still fit?
Now my question is, will the Thomson elite fit onto the stock fork of the mercier kilo tt frameset?
The clamp is 1 1/8 but the stock fork is 1, will it still fit?
#8
Gone Tarcking. Back Later
Join Date: Nov 2007
Location: Blacksburg, VA
Posts: 502
Bikes: Iron Horse Warrior Team (tricked to high heaven), Jamis Coda Sport (frame and fork, built into CX commuter), Gary Fisher Opie Dirt Jumper,SE Lager tarck bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
You should be able to use a shim to fit the larger stem onto the smaller fork.
#9
Senior Member
Join Date: Dec 2006
Location: Columbus, Ohio
Posts: 445
Bikes: Serotta Colorado III Track (Renyolds Ouzo Pro Aero Fork, Dura-Ace to Mavic CXP-14 wheels, Sugino crank, Thomson and 3T the rest), Steelman Cyclocross (Campy Record 10, Deda Newton & Thomson stuff)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Well, not necessarily, Thomson Elite stems come in a few different versions. The RB021s are 26.0 diameter at the clamp, the stem needs to match and be 26.0 as well. If you have a 25.8 stem, it's not a perfect match, but search the forum for more discussion on this. If it's 31.8 you can still shim it, but again search, the bigger difference introduces more opportunity for problems.
The 1 1/8" stem can be shimmed to fit a 1" steerer, you are looking for something like this: https://www.performancebike.com/shop/...tegory_ID=5235
Can you show us what stem you have?
P.S. - The combo looks pretty nice: https://velospace.org/files/bike_final224.jpg
The 1 1/8" stem can be shimmed to fit a 1" steerer, you are looking for something like this: https://www.performancebike.com/shop/...tegory_ID=5235
Can you show us what stem you have?
P.S. - The combo looks pretty nice: https://velospace.org/files/bike_final224.jpg
#11
Senior Member
Join Date: Apr 2008
Posts: 1,041
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#12
Grumpy Old Bugga
Join Date: Oct 2006
Location: Adelaide, AUSTRALIA
Posts: 4,229
Bikes: Hillbrick, Malvern Star Oppy S2, Europa (R.I.P.)
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 370 Post(s)
Likes: 0
Liked 8 Times
in
6 Posts
As others have said, a 1" steerer can be shimmed out to 1 1/8" successfully. That's the standard setup for the Trek520 - over 3,000 km on mine and that's one of the few areas that hasn't given me grief.
Richard
Richard