![]() |
KMC K410 chain
How does the KMC K410 chain fit into the KMC range? How does it compare with the 710? Actually, I guess the real answer is 'what's it like for what we're doing?'.
I ask because my lbs has the 410 which he regularly flogs to bmx racers but not the others in the range - I'm after a long life chain for normal fixed riding (ie, brakes, commuting, fat old git who oils the thing regularly but hates all the pfaffing about involved with cleaning the stupid thing, etc) Richard note: this was asked in another thread but with the direction of that thread, the question could be easily missed ... so I asked again :D |
http://www.kmcchain.com/file/en/chain_choice_chart.pdf
I recommend the KMC Z510HX or the Z610HX (for 3/32). |
Thanks for the chart. It gives a good idea of where the chains you see recommended here fit in. :D
Typically, the 410 which is the chain my lbs has in stock, isn't mentioned :notamused: Richard |
A browse of the KMC site (via the link given by Geordi) shows the 410 rated for "Beach Cruiser, Exerciser, Single Speed Bike" with only a few of their little icons that tell you how wonderful it is.
Hmm. I might ask him to order something further up the pecking order. Richard |
While we're on chains, do quick links work with fixed or are you better off keeping the thing as one piece (showing my heritage here, I'm not sure I trust quick links)?
Richard |
master links are fine.
|
I have been using a great deal of KMC710 in our shop (where we build a lot of ss and fg bikes) and on my own bikes which range from fixed gears to ss coaster bikes, and 3 speeds and it has performed flawlessly on hundreds of bikes.
It looks badass (because it is) and will run $20.00 - $25.00 For 3/32 applications any decent quality chain should work but again, kmc delivers some very good value for the dollar spent. I work as a messenger and my work bike runs a 3/32 drive... I use kmc Z51 chain (6-7 speed) which is cheap, very reliable, and long wearing. |
any of the KMC chains will work for what you need, you're not riding brakeless and chances are you're not racing track so any basic 3/32" chain will be sufficient even if KMC says its meant for a beach cruiser.
|
Originally Posted by Geordi Laforge
(Post 8115944)
http://www.kmcchain.com/file/en/chain_choice_chart.pdf
I recommend the KMC Z510HX or the Z610HX (for 3/32). |
It's a chain. Pretty similar to all the other out there.
|
| All times are GMT -6. The time now is 06:45 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.