Fixed Gear/Single Speed - Start Here!
#351
Senior Member
Join Date: Jun 2012
Location: Chicago
Posts: 750
Bikes: https://www.pedalroom.com/bike/2008-se-lager-brown-6612
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I don't know guys, I was messing with my seat a little, not entirely because of the handlebar discomfort issue (which only really seems to be an issue on my early morning commute while my body is still stiff), but also because I had a feeling I was not sitting over my cranks properly... I scooted the seat forward just a bit and now it feels much better in several aspects.
My legs feel better while pedaling (pedaling is more natural/easy), and I can get better leverage now for decelerating or skid stops.
I think I def had the seat too far back. So I wasn't adjusting the seat because of the handlebar issues, but it did end up helping that situation a little. Once my new stems shows up, I think it'll be perfect. I'll be going from +17, 90mm to a +35, 75mm.
As far as frame size goes, I know effective top tube length is the key measurement, but I only have about an inch of room as far as standover height. Maybe 3/4". So I don't think it's actually too small. I think I could do well with a 62cm but I think something like a 63cm would be too unwieldy and maybe even a bit too big. It's not like I'm out there riding a kids bike or something really odd/funny looking.
I know it looks funny because of the amount of seatpost showing, but I'm just such a tall wirey fellow. I'm all arms and legs. Like a spider, haha, so the bike is going to look like it's setup for too much reach and too much seatpost, but it suits me.
Maybe I'll ask my LBS next time I'm in. Maybe they can watch me ride or sit on it and tell me. I think that's a better indicator - seeing me actually ON the bike.
My legs feel better while pedaling (pedaling is more natural/easy), and I can get better leverage now for decelerating or skid stops.
I think I def had the seat too far back. So I wasn't adjusting the seat because of the handlebar issues, but it did end up helping that situation a little. Once my new stems shows up, I think it'll be perfect. I'll be going from +17, 90mm to a +35, 75mm.
As far as frame size goes, I know effective top tube length is the key measurement, but I only have about an inch of room as far as standover height. Maybe 3/4". So I don't think it's actually too small. I think I could do well with a 62cm but I think something like a 63cm would be too unwieldy and maybe even a bit too big. It's not like I'm out there riding a kids bike or something really odd/funny looking.
I know it looks funny because of the amount of seatpost showing, but I'm just such a tall wirey fellow. I'm all arms and legs. Like a spider, haha, so the bike is going to look like it's setup for too much reach and too much seatpost, but it suits me.
Maybe I'll ask my LBS next time I'm in. Maybe they can watch me ride or sit on it and tell me. I think that's a better indicator - seeing me actually ON the bike.
#353
Senior Member
Join Date: Jun 2012
Location: Chicago
Posts: 750
Bikes: https://www.pedalroom.com/bike/2008-se-lager-brown-6612
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
haha will do. Thanks for not doing the whole big schpeel with the gif and everytyhing.
#354
Junior Member
Join Date: Feb 2011
Location: Land of Milk and Honey
Posts: 17
Bikes: Motobecane Super Mirage Conversion, EAI Toyo Godzilla
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
get fit
And on your earlier query, yeah, looks like pretty relaxed geometry, and a lot of rake on the fork too, that has a significant affect on handling...with the benefit of more comfort. That said, larger frames will have slightly shallower angles, so YMMV.
Scrodzilla rides an EAI according to his sig, I do too. If he likes his half as much as I like mine that is a strong endorsement. If you want track-like geo. it's a solid choice but they aren't free either e.g., not a Chicago lock-up bike. EAI makes those frames in some pretty big sizes too. Clearances are extraordinarily tight (at least on the japanese flavor) if you build your own, though...I shaved mm to get as narrow a q-factor on my cranks as possible (something like a 107mm phil wood BB spindle) and had to have the shop dimple the chain stay to clear the chain ring.
ffDf: fatties DON'T fit fine ;-]
#355
Newbie
Join Date: Jul 2012
Location: nyc
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hey all, I'm pretty new to the community and am in the market for my first single speed. After speaking with some friends and doing some research on my own, I've found a few possibilities. I'm hoping for your thoughts or other suggestions. I'm pretty set on single speed versus fixed gear.
Trek Earl
Schwinn Racer
Bianchi Via Veneto
I know that it's kind of a wide range of prices there, but that's a general feel for my budget. I figure the Schwinn would be the biggest value but I'm not sold on the coaster brakes and feel that paying some more at the start could defray some costs later. My friend has the Trek and said that he really enjoys it. The Bianchi is (from what I've heard) very high quality, but I'm worried that I'd be overpaying for something I could get an equivalent of for less.
If it helps, I'm located in nyc and will be using it primarily to commute between brooklyn and manhattan every day.
Trek Earl
Schwinn Racer
Bianchi Via Veneto
I know that it's kind of a wide range of prices there, but that's a general feel for my budget. I figure the Schwinn would be the biggest value but I'm not sold on the coaster brakes and feel that paying some more at the start could defray some costs later. My friend has the Trek and said that he really enjoys it. The Bianchi is (from what I've heard) very high quality, but I'm worried that I'd be overpaying for something I could get an equivalent of for less.
If it helps, I'm located in nyc and will be using it primarily to commute between brooklyn and manhattan every day.
#356
Member
Join Date: Jul 2012
Location: Leeds UK
Posts: 33
Bikes: focale 44
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
How does one go about replacing or what parts would I need to replace the stock handle-bars on a F44-relax?
also what 700cc28 tyre for commuting city?
this is where I would generally shop if it helps--- tokyofixedgear.com
Any input appreciated.
also what 700cc28 tyre for commuting city?
this is where I would generally shop if it helps--- tokyofixedgear.com
Any input appreciated.
#357
Newbie
Join Date: Aug 2012
Location: southern IN
Posts: 4
Bikes: San Jose
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Overwhelmed is an understatement. I have been customizing my cars for about 8 years now, and I just jumped into singlespeed/fixed gear bikes without knowing a damn thing, but I am learning.
Picked up this 53cm '09 San Jose from a LBS (I'm 5'11" 150lbs). Guy I got it from is super cool and used to live in NY. Loaded it up with all sorts of goodies:
Origin 8 Tiki bars
700Cx18 (23C) 1/8" Tessa rimzos
CST czar Comp tires
FSA SL-K brakes (front and rear)
Currently running freewheel setup with 18t cog and Origin8 Beck130 42t chainring, but it has dat flippity floppity hub
TRP levers
Shimano 105 cranks
All in all, the bike is an absolute blast, but I do have some concerns.
I know that the favored gear inch number is 70-72 for a road bike, but unfortunately, I can't run anything bigger than a 42t on the San Jose frame without clearance issues. My question is, are there any remedies to the 42t chainring that could get me closer to an ideal number of gear inches? Better yet, is there some sort of way to space the drivetrain and be able to run a larger chainring/cog assembly?
TIA for any helpful response
Picked up this 53cm '09 San Jose from a LBS (I'm 5'11" 150lbs). Guy I got it from is super cool and used to live in NY. Loaded it up with all sorts of goodies:
Origin 8 Tiki bars
700Cx18 (23C) 1/8" Tessa rimzos
CST czar Comp tires
FSA SL-K brakes (front and rear)
Currently running freewheel setup with 18t cog and Origin8 Beck130 42t chainring, but it has dat flippity floppity hub
TRP levers
Shimano 105 cranks
All in all, the bike is an absolute blast, but I do have some concerns.
I know that the favored gear inch number is 70-72 for a road bike, but unfortunately, I can't run anything bigger than a 42t on the San Jose frame without clearance issues. My question is, are there any remedies to the 42t chainring that could get me closer to an ideal number of gear inches? Better yet, is there some sort of way to space the drivetrain and be able to run a larger chainring/cog assembly?
TIA for any helpful response
Last edited by l33t; 08-23-12 at 09:10 PM.
#358
Fixie Infamous
Join Date: Dec 2011
Location: SF
Posts: 10,474
Bikes: 2007 CAAD Optimo Track, 2012 Cannondale CAAD10, 1996 GT Force restomod, 2015 Cannondale CAADX
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 54 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
A 16t cog and you have the golden 69gi.
A 15 and you have a solid 73.6gi.
You have brakes, so I'd run the 15t.
A 15 and you have a solid 73.6gi.
You have brakes, so I'd run the 15t.
#359
Newbie
Join Date: Aug 2012
Location: southern IN
Posts: 4
Bikes: San Jose
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
That was my primary concern. I am averaging ~10mi a day, so I wanted to prep the chainring/cog setup for the sense of wear.
#360
Fixie Infamous
Join Date: Dec 2011
Location: SF
Posts: 10,474
Bikes: 2007 CAAD Optimo Track, 2012 Cannondale CAAD10, 1996 GT Force restomod, 2015 Cannondale CAADX
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 54 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
Great! I have no need to be an out-of-control-hipster because I live in a really lame city where everybody is fat and nobody bikes, so running brakes and a 15-16t cog might be the best option, but damn that ish is gonna wear fast.
That was my primary concern. I am averaging ~10mi a day, so I wanted to prep the chainring/cog setup for the sense of wear.
That was my primary concern. I am averaging ~10mi a day, so I wanted to prep the chainring/cog setup for the sense of wear.
Probably have 5k miles on it.
Don't worry about wear.
#361
Guest
Posts: n/a
Mentioned: Post(s)
Tagged: Thread(s)
Quoted: Post(s)
I've been trying to pick out some shoes for riding flat pedals on fixed. I found some Chrome brand shoes, but can only seem to order them from the UK. They may work, but I'd like opinions on other brands. Maybe something with velcro instead of laces would be better?
#363
My pants used to fit me
Try Zappos.com. Free shipping both ways so you can order several types and sizes to try them on then send back any that you don't want (and you have a year to return them if you're lazy). I ordered 15 pairs of shoes from them last week and kept one.
Regarding velcro, if you're using pedal straps I'd avoid it. The straps on the shoes run parallel to the straps on the pedals and they run into each other when you try to put your foot in.
Regarding velcro, if you're using pedal straps I'd avoid it. The straps on the shoes run parallel to the straps on the pedals and they run into each other when you try to put your foot in.
#364
Guest
Posts: n/a
Mentioned: Post(s)
Tagged: Thread(s)
Quoted: Post(s)
Try Zappos.com. Free shipping both ways so you can order several types and sizes to try them on then send back any that you don't want (and you have a year to return them if you're lazy). I ordered 15 pairs of shoes from them last week and kept one.
Regarding velcro, if you're using pedal straps I'd avoid it. The straps on the shoes run parallel to the straps on the pedals and they run into each other when you try to put your foot in.
Regarding velcro, if you're using pedal straps I'd avoid it. The straps on the shoes run parallel to the straps on the pedals and they run into each other when you try to put your foot in.
#365
My pants used to fit me
I was running clipless pedals, but I'm getting tired of wearing those shoes and changing shoes when I get to the office. The straps don't really appeal to me so I thought I'd look into good shoes for flats. I'll check out Zappos. Do you have any brand/model suggestions? Or any to particularly avoid? Thanks.
#366
Junior Member
Join Date: Aug 2012
Posts: 9
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What the best Chain Tensioner for the money out there?
Soulcraft - https://www.soulcraftbikes.com/goods.php?category_id=5 $90.00
Misfit - https://www.psyclestore.com/products....peed-Tensioner $33.00
Rohloff - https://www.universalcycles.com/shopp...&category=2622 $85.00
Melvin - https://www.paulcomp.com/melvin.html $90.00
Rennen - https://www.benscycle.net/index.php?m...541c123abf75ca $49.00
Soulcraft - https://www.soulcraftbikes.com/goods.php?category_id=5 $90.00
Misfit - https://www.psyclestore.com/products....peed-Tensioner $33.00
Rohloff - https://www.universalcycles.com/shopp...&category=2622 $85.00
Melvin - https://www.paulcomp.com/melvin.html $90.00
Rennen - https://www.benscycle.net/index.php?m...541c123abf75ca $49.00
#367
Newbie
Join Date: Aug 2012
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
i used the fit calculator at competitivecyclist.com (via the link Scrod posted above). i'm 5' 7.25" with a 29" inseam and it's giving me a "competitive fit" steat tube (c-c) range of 47.7 - 48.2cm
does that sound wrong or weird?
does that sound wrong or weird?
#368
Newbie
Join Date: Aug 2012
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
hey guys im new to the forum and i love the site so far but i do have a few questions to ask. my neighbor has a gmc denali thats he's giving me for doing him a favor and i would like to convert it to a ss, im just wondering how much would it cost to convert this bike into a ss?
#369
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 44,801
Bikes: everywhere
Mentioned: 71 Post(s)
Tagged: 1 Thread(s)
Quoted: 12635 Post(s)
Liked 7,528 Times
in
3,989 Posts
If you just leave it in one gear it would cost nothing.
You could pay $10 for a chain breaker, see if you can find magic ratio, remove the derailers and have a slightly more single speedy SS.
You could go full bore and spend more than the MSRP of a new Denali if you really wanna do it up.
You could pay $10 for a chain breaker, see if you can find magic ratio, remove the derailers and have a slightly more single speedy SS.
You could go full bore and spend more than the MSRP of a new Denali if you really wanna do it up.
#370
Newbie
Join Date: Aug 2012
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
lester of puppets where might i get the parts to make it a ss at. i dont need the top of the line parts because this is going to be a daily bike just around nyc.
#371
Member
Join Date: Jun 2011
Location: Brooklyn, NY
Posts: 21
Bikes: Leader 735
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hey I have an origin8 Cutler and I want to upgrade my crank set on them but I have no clue how to tell what would fit and what wouldn't any help would be much appreciated.
Also suggestions for a new crank set that would fit would be great as well.
Also suggestions for a new crank set that would fit would be great as well.
#372
Guest
Posts: n/a
Mentioned: Post(s)
Tagged: Thread(s)
Quoted: Post(s)
That bike looks great. I'm surprised you can only fit a 42T chainring, though. Are you mounting the chainring on the front or the back of the crank arms? That will have an effect. If it's already on the front and it still barely clears, you may be able to bring the whole crank out a bit further with a longer bottom bracket spindle, say for instance by going from a 103 to a 108. But this can cause chainline issues and it will bring your feet further out from the bike, so those are things you have to consider. It's probably best to leave it alone unless you have money and time to burn.
#374
Senior Member
Join Date: Apr 2011
Location: Atlanta, Georgia
Posts: 720
Bikes: 2012 Cinelli Mystic Rat, Nashbar CX
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Okay here goes my question/s...
Any thoughts pro/com on the Fuji Track Classic? (buying new maybe...)
I was also wondering something...I have arthritis in my hands and neck. Doesn't really bother me much on my CX bike because I have a carbon fork on it. I'm wondering is there a good carbon fork that I could put on the Fuji Track Classic? Any recommendations? I wonder about the shock and awe My hands will get, especially as it starts to get cold with a steel fork.
As a matter of fact, I don't recall the last time I didn't have a carbon fork...
Any thoughts pro/com on the Fuji Track Classic? (buying new maybe...)
I was also wondering something...I have arthritis in my hands and neck. Doesn't really bother me much on my CX bike because I have a carbon fork on it. I'm wondering is there a good carbon fork that I could put on the Fuji Track Classic? Any recommendations? I wonder about the shock and awe My hands will get, especially as it starts to get cold with a steel fork.
As a matter of fact, I don't recall the last time I didn't have a carbon fork...
#375
Fixie Infamous
Join Date: Dec 2011
Location: SF
Posts: 10,474
Bikes: 2007 CAAD Optimo Track, 2012 Cannondale CAAD10, 1996 GT Force restomod, 2015 Cannondale CAADX
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 54 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
The Fuji Track Classic is 100% cro mo.
It could be argued that steel is more road dampening that carbon.
It could be argued that steel is more road dampening that carbon.