Help with new cranks and bb (sram omnium)
#1
Senior Member
Thread Starter
Join Date: Feb 2006
Location: Denver
Posts: 226
Bikes: 05 Bianchi Pista, 07 Niner Air 9
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Help with new cranks and bb (sram omnium)
I've had a set of sram omniums laying around for a while now and I've finally got the time to install them. I have an 05 pista and right now it has the stock sugino bb and shimano 600 cranks. My wheels are deep vs laced to formulas.
With that said, I was never the best at figuring out chainlines. On the two bikes I've built myself, I pretty much winged it and both chainlines came out ok (using the inside ring on one of them). I know I need a new bb since the cranks have external bearings. I don't need anything super nice, just something that will work with my setup. How about this guy? https://www.jensonusa.com/store/produ...Bb+Cupset.aspx
So will the English 68/73mm work with my bike/wheelset?
Any advice would be appreciated.
With that said, I was never the best at figuring out chainlines. On the two bikes I've built myself, I pretty much winged it and both chainlines came out ok (using the inside ring on one of them). I know I need a new bb since the cranks have external bearings. I don't need anything super nice, just something that will work with my setup. How about this guy? https://www.jensonusa.com/store/produ...Bb+Cupset.aspx
So will the English 68/73mm work with my bike/wheelset?
Any advice would be appreciated.
#2
Don't Worry..Beef Curry
Join Date: Jan 2009
Location: San Francisco
Posts: 109
Bikes: 80's converted Centurion
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
there is only one BB for that crank. The one you highlighted @ jenson is the one. The english model.
Last edited by tek336; 06-08-10 at 08:01 PM. Reason: addition
#3
Ths Hipstr Kills Masheenz
Join Date: Oct 2006
Location: seattle
Posts: 8,542
Bikes: tirove
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
it's a system called BB30. i have a set of elita's on my road bike that use the same bb.
your chainline will be fine. maybe not perfect, but fine.
your chainline will be fine. maybe not perfect, but fine.
#5
A little North of Hell
Join Date: Mar 2006
Posts: 4,892
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 71 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
Omnium
The Omniums are not BB30 standard.
https://www.bb30standard.com/
Enduro and Chris King make BB's for the Omnium's.
https://chrisking.com/bottombracket
https://www.bb30standard.com/
Enduro and Chris King make BB's for the Omnium's.
https://chrisking.com/bottombracket
Thread
Thread Starter
Forum
Replies
Last Post
SvenSurly
Bicycle Mechanics
5
02-12-15 09:34 PM
Autobus
Bicycle Mechanics
1
07-08-10 07:13 AM