How do you lock your bikes?
#2
GONE~
Join Date: Apr 2010
Posts: 6,747
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Nevermind...
I have one of these heavy duty bad boy, I lock it the same way you lock your front wheel, sometimes with my helmet.
Have you read Sheldon's article on locking yet?
https://www.sheldonbrown.com/lock-strategy.html
I have one of these heavy duty bad boy, I lock it the same way you lock your front wheel, sometimes with my helmet.
Have you read Sheldon's article on locking yet?
https://www.sheldonbrown.com/lock-strategy.html
Last edited by Squirrelli; 07-15-10 at 09:56 PM.
#4
Mission Creep
Join Date: Mar 2010
Location: oakland, ca
Posts: 274
Bikes: raleigh macaframa, motobecane record
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I use sheldons method. However, I have heard you can saw through the back wheel, so im a little worried...
But, I usually bring my bike in with me. I have almost 1600 put into it, and I dont like it being too far away from me
But, I usually bring my bike in with me. I have almost 1600 put into it, and I dont like it being too far away from me
#5
Senior Member
Join Date: Jun 2009
Posts: 741
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I laughed out loud. Then I cried like a baby. My guess is soon your town will experience things like color television sets, push button telephones and dry cleaners. Just like fixed/SS bikes these are good things. Do not be afraid. Embrace them all.
#6
GONE~
Join Date: Apr 2010
Posts: 6,747
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I don't think it's safe just locking the rear, I'd be worry more about the front rather than the rear. Since your frame has track ends, it's harder to take out the rear if they don't know how to lift up the chain, whereas the front is held together by two bolts, anyone with a wrench could run away with the wheel. You've said you live in a low crime area and there are many more easier targets than your dual locks, I would just go with that set up.
#8
helmet brake
Join Date: May 2008
Location: Brooklyn
Posts: 624
Bikes: Kilo TT
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
1. I bring it inside.
2. If leaving for ten minutes, mini U thru frame / rear wheel / immovable object
3. 10 min to 1 hour, add second u lock securing front wheel to frame / immovable object.
4. More than 1 hour, bring it inside / go home / check on it alot.
2. If leaving for ten minutes, mini U thru frame / rear wheel / immovable object
3. 10 min to 1 hour, add second u lock securing front wheel to frame / immovable object.
4. More than 1 hour, bring it inside / go home / check on it alot.
Last edited by jakerock; 07-15-10 at 11:10 PM.
#9
Senior Member
Join Date: Nov 2008
Location: Bay Area, Calif.
Posts: 7,239
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Likes: 0
Liked 7 Times
in
6 Posts
Depends on the circumstances. I always have a little cable lock on the bike, even on trips where I don't plan to stop anywhere. In our fairly safe area that's all I use when locking the bike for shopping trips, lunches, meetings, etc. But I also have a U-lock that I use if riding into the city (SF or Oakland) and will be leaving the bike locked up outside. The first time I used the U-lock was on a ride with a stop at a science museum in SF. Two people with me on the ride used their cable lock and when we came out my bike was the only one left.
#10
Senior Member
Join Date: Jun 2010
Location: Brooklyn, NY
Posts: 107
Bikes: Peugeot PX10 fixie conversion
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Depends on the circumstances. I always have a little cable lock on the bike, even on trips where I don't plan to stop anywhere. In our fairly safe area that's all I use when locking the bike for shopping trips, lunches, meetings, etc. But I also have a U-lock that I use if riding into the city (SF or Oakland) and will be leaving the bike locked up outside. The first time I used the U-lock was on a ride with a stop at a science museum in SF. Two people with me on the ride used their cable lock and when we came out my bike was the only one left.
I use a Kryptonite Faggetaboudit Standard U-lock through the frame and back wheel. I run a Kryptonite cable through the front wheel and use the U lock to lock it down. Then of course the brooks saddle is slightly secured with a extra piece of chain wrapped in an a spare tire tube. I'll post a pic later tonight or tm.
To be honest with you though, I'm seriously paranoid about theft. I got a bit of of lock envy in brooklyn. I'm thinking about upgrading. My lock set up looks seriously wimpy when you look at others in Brooklyn. Everyone has a huge chain lock making my little U-Lock look like a little biotch. Whatever, it works for now.
#11
Senior Member
Join Date: Sep 2007
Location: Scottsdale, AZ
Posts: 1,616
Bikes: 1990 Waterford Paramount, 1986 Pinarello Pista 195? Raleigh 3sp, 2001 Surly 1x1, 2014 Canfield N9, 2015 Canfield Balance, 2013 Rocky Mtn Flatline, 2012 Intense SS2, 2014 Transition Klunker, + more!
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Krypto 12mm cable through frame and wheels. Have yet to experience a bike being stolen so im not quite so paranoid about it I guess. It will be a hard lesson though.
#12
Banned
Join Date: Sep 2006
Posts: 96
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I use the Kryptonite NY Standard U-lock for the seat tube, rear wheel, & whatever I'm locking to, and the evolution mini for the front wheel. I don't do anything to secure other stuff...although I have toyed with the idea of using superglue & ball bearings for some of the allen bolts but haven't decided whether it's worth the hassle (e.g. for the stem, seat post, and saddle).
#13
Nü-Fred
Join Date: Jul 2009
Location: Brooklyn, NY
Posts: 1,517
Bikes: Torelli Tipo Uno (stolen), Peugeot Nice, Mercier Kilo TT
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
mini Kryptonite Faggetaboudit U-lock thru rear wheel as Sheldon's method.
cable thru frame, ulock, front and rear wheel.
cable thru frame, ulock, front and rear wheel.
#14
Senior Member
Join Date: Feb 2009
Location: NC
Posts: 1,296
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Wait a second... you people lock your bikes? Doesn't that scratch the paint... **** that.
#15
Goon
Join Date: Jul 2008
Location: Ypsilanti, MI
Posts: 864
Bikes: Rocky Mountain RC30, Soma Sport Fixed
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I use sheldon's method.
I had seen a video of someone sawing through the rear wheel to take the frame, however, that was on a cheap crappy mountain bike. with a fully tensioned road wheel, i would imagine the pinch on such a saw would make it almost impossible to saw through without first loosening the spokes.
Additionally, my wheels are easily more valuable than the frame, so sawing through the rear wheel is going to severely cut into any profit they make.
And if they recognize that they can't pull the rear wheel through the triangle, and thus wish to saw through the wheel, then the must know at least a little about bikes and realize that they'd be destroying the most valuable part of my bike, and thus simply not bother.
I had seen a video of someone sawing through the rear wheel to take the frame, however, that was on a cheap crappy mountain bike. with a fully tensioned road wheel, i would imagine the pinch on such a saw would make it almost impossible to saw through without first loosening the spokes.
Additionally, my wheels are easily more valuable than the frame, so sawing through the rear wheel is going to severely cut into any profit they make.
And if they recognize that they can't pull the rear wheel through the triangle, and thus wish to saw through the wheel, then the must know at least a little about bikes and realize that they'd be destroying the most valuable part of my bike, and thus simply not bother.
#16
THE STUFFED
Join Date: Oct 2009
Location: San Francisco, CA
Posts: 12,671
Bikes: R. Sachs Road; EAI Bareknuckle; S-Works Enduro
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 361 Post(s)
Likes: 0
Liked 20 Times
in
17 Posts
I usually get to keep mine inside at work.... but for a quick one I would usually have my mini evo 4 through the rear wheel and frame to unmovable object. For a longer time I would add on the accessory cable and/or even a second mini evo 4 LS (I have that one as a spare) depending on the location.
#17
helmet brake
Join Date: May 2008
Location: Brooklyn
Posts: 624
Bikes: Kilo TT
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I use sheldon's method.
I had seen a video of someone sawing through the rear wheel to take the frame, however, that was on a cheap crappy mountain bike. with a fully tensioned road wheel, i would imagine the pinch on such a saw would make it almost impossible to saw through without first loosening the spokes.
I had seen a video of someone sawing through the rear wheel to take the frame, however, that was on a cheap crappy mountain bike. with a fully tensioned road wheel, i would imagine the pinch on such a saw would make it almost impossible to saw through without first loosening the spokes.
Also, your logic about thieves not sawing thru "valuable" parts of a bike is a little weird.
I get offered beautiful bikes that definitely are worth $500 from guys in the neighborhood about twice a year.
Their asking price: $25 to $50.
And other dudes collect scrap metal all day... Broken Ac units, rebar, f-ed up metal shelving.
They will push it miles in a shopping cart. A bike that would get them $50 in one shot... Think about it.
Anyway... Be careful and I hope everyones rides stay safely in your hands.
Peace.
Last edited by jakerock; 07-16-10 at 10:44 AM.
#18
chickenosaurus
Join Date: Sep 2008
Location: Boston, MA
Posts: 1,189
Bikes: 2010 Motobecane Team Track, 1997 GT Edge, 2012 Kilo TT Stripper
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I try to bring mine in with me everywhere, but if not, I sheldon lock the rear wheel, and lock my helmet to that.
#19
Senior Member
Join Date: Nov 2008
Posts: 502
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Also see:
https://www.bikeforums.net/showthread...om+a+locksmith
#20
Banned
Join Date: Sep 2006
Posts: 96
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Solder works too. I just did that on my bikes that I have everything set how I want it. They make solder wicking that soaks the solder back up when you want to get it out. 5 minutes....
Also see:
https://www.bikeforums.net/showthread...om+a+locksmith
Also see:
https://www.bikeforums.net/showthread...om+a+locksmith
Solder sounds much easier. dumb question: what type of solder did you usee.g. lead, lead-free, silver alloy, etc? Also, did you have any problems with heating the allen bolt to a high enough temp to melt the solder?
Last edited by gusmore; 07-16-10 at 11:38 AM.
#22
Senior Member
Join Date: Jul 2008
Location: San Francisco, CA
Posts: 334
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Yup, the Academy of Sciences and the de Young Museum are a hot place for bike thieves. They specifically look for cable locks. So, ironically, cable locks act as an attractant rather than a deterrent out there.
#23
Oscillation overthruster
Join Date: May 2010
Location: Duncan, BC
Posts: 1,532
Bikes: Cinelli Mash / CAAD9 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Sheldon here. Wheel and frame. $15 MEC u-lock.
If they want your bike they will take it. I prefer to limit the crack heads and teenagers who want a fixed rear wheel for their conversion.
$100-$150 lock setup or $200 deductible and I can ride 30 pounds lighter? I dunno, just had so many bikes stolen over the years that I never le the bike out of my sight. Never had a lock defeated, it's always been a break in or me leaving it unattended for 2 minutes tops.
Line of sight. Simple lock.
If they want your bike they will take it. I prefer to limit the crack heads and teenagers who want a fixed rear wheel for their conversion.
$100-$150 lock setup or $200 deductible and I can ride 30 pounds lighter? I dunno, just had so many bikes stolen over the years that I never le the bike out of my sight. Never had a lock defeated, it's always been a break in or me leaving it unattended for 2 minutes tops.
Line of sight. Simple lock.
#24
extra bitter
I dont understand what would be hard about cutting thru a wheel... Not arguing, but curious.
Also, your logic about thieves not sawing thru "valuable" parts of a bike is a little weird.
I get offered beautiful bikes that definitely are worth $500 from guys in the neighborhood about twice a year.
Their asking price: $25 to $50.
And other dudes collect scrap metal all day... Broken Ac units, rebar, f-ed up metal shelving.
They will push it miles in a shopping cart. A bike that would get them $50 in one shot... Think about it.
Anyway... Be careful and I hope everyones rides stay safely in your hands.
Peace.
Also, your logic about thieves not sawing thru "valuable" parts of a bike is a little weird.
I get offered beautiful bikes that definitely are worth $500 from guys in the neighborhood about twice a year.
Their asking price: $25 to $50.
And other dudes collect scrap metal all day... Broken Ac units, rebar, f-ed up metal shelving.
They will push it miles in a shopping cart. A bike that would get them $50 in one shot... Think about it.
Anyway... Be careful and I hope everyones rides stay safely in your hands.
Peace.
I've seen the video of a guy sawing through a locked wheel. If I recall correctly, it's sped up to make it look like it won't take very long. But either way, if somebody bothers to bring a saw and spend the time getting through the rim, most locks aren't going to fare much better. If there's another bike around and yours is relatively hard to liberate, chances are pretty good the thief will move on.
Regarding front vs back, I'd be a lot more disappointed if someone took my back wheel, so if I'm just locking up one, it's the rear. Yes, unbolting the front isn't too tricky, but really, neither is the rear. Thieves may be dumb as a rule, but I don't think they'll be scratching their heads about how to remove an unlocked rear wheel -- getting the chain out of the way isn't exactly rocket science.
Really, anything that's not locked, you shouldn't be surprised when it eventually disappears. For me, locking the front every time I park just isn't worth the effort where I live, and I'm okay knowing that my wheel may eventually get pinched as a result.
#25
.
Join Date: May 2009
Location: Columbus
Posts: 2,027
Bikes: Pegueot UO8, Tommaso Augusta
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I usually just lock with one U-Lock around the frame and front wheel. But because my nicer ride is just about done (literally 1 piece waiting for in the mail ughhh) I have bought a second U-Lock for the rear wheel and frame.