Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Singlespeed & Fixed Gear (https://www.bikeforums.net/singlespeed-fixed-gear/)
-   -   Kilo TT to Felt TK-3 Sizing (https://www.bikeforums.net/singlespeed-fixed-gear/701971-kilo-tt-felt-tk-3-sizing.html)

JDMFanatic 12-18-10 05:31 PM

Kilo TT to Felt TK-3 Sizing
 
Just came up on a good deal for a Felt TK-3.

I currently have a 55cm Kilo TT and it's a bit too big (The top tube barely clears my manhood). My inseam is around 31.5 inches. Would the 56cm Felt TK-3 be a good bet? The website says the standover is 785mm... would that work?

Kayce 12-18-10 11:30 PM

1 Attachment(s)
With two quick searched i found that the size 55 Kilo has a stand over of 812.8mm. Now armed with that information that any reasonable person should be able to get on their own, I would assume that you could figure it out. But since you created a post about it, rather than figuring it out on your own I will lay this all out very simple for you.

The standover on the TK-3 is a little more than 1 inch lower than on your kilo. Or this much:
http://bikeforums.net/attachment.php...hmentid=182727

xkillemallx16 12-18-10 11:43 PM

i saw this on cl. the guy that was selling it is a bf member. you should be fine, btw. 55 kilos fit like 57s and if its a tad big then the 56 should be fine. also, dont base standover to fit, rather tt length.


All times are GMT -6. The time now is 06:20 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.