Swirl paint a bikcycle frame.
#1
Senior Member
Thread Starter
Swirl paint a bikcycle frame.
Just curious if anyone has tried this on a frame or fork.It seems pretty cool,but also looks like it could get out of hand.
I guess all I would like to know is if there are any drawbacks doing it to a frame or anything that would be problematic.
If I remember correctly,Cannondale did something similar to a F700 frame and made it look like it was made of wood.
Should I try,or will it be a bad idea?
I guess all I would like to know is if there are any drawbacks doing it to a frame or anything that would be problematic.
If I remember correctly,Cannondale did something similar to a F700 frame and made it look like it was made of wood.
Should I try,or will it be a bad idea?
#5
Senior Member
Thread Starter
Yeah,Im thinking...
CON:Bike will look like 80s hair band....
PRO:Bike will look like 80s hair band.
CON:Bike will look like 80s hair band....
PRO:Bike will look like 80s hair band.
#6
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,852
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Mentioned: 584 Post(s)
Tagged: 0 Thread(s)
Quoted: 1908 Post(s)
Liked 574 Times
in
339 Posts
It's usually called a marbled finish. I've done a couple guitars and other things. The technique is pretty simple: you fill a big tub with water (kiddie pool suggests itself), toss some dilute oil-based paint in and let it spread out on the surface. If you use two or three colors of paint, it's helpful to use paints that won't mix with one another. Swirl them around until you have a pattern you like, then dip the primed item in. When it comes out, it's painted.
The problem with a round item, like a bike frame tube, is that the frame has to go all the way into the water --below the surface-- to get painted on all sides, and then is likely to get painted a second time when you take it out again. And it will be wet.
The problem with a round item, like a bike frame tube, is that the frame has to go all the way into the water --below the surface-- to get painted on all sides, and then is likely to get painted a second time when you take it out again. And it will be wet.
#7
Senior Member
Join Date: Oct 2013
Location: Roanoke, Va
Posts: 997
Bikes: 2013 leader 721. 2015 leader 725. 2012 fuji feather
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Could you run a paper towel or something over the surface of the water to absorb the extra paint before lifting the frame back out of the water?
#8
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,852
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Mentioned: 584 Post(s)
Tagged: 0 Thread(s)
Quoted: 1908 Post(s)
Liked 574 Times
in
339 Posts
Try it, it's a heck of a lot of fun. Practice on disposable items before you do a bike! Take notes on what kind of paints and thinners you used. You'll figure it out pretty quick, I promise!
#9
Senior Member
Join Date: Oct 2013
Location: Roanoke, Va
Posts: 997
Bikes: 2013 leader 721. 2015 leader 725. 2012 fuji feather
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
^^Thanks for the tips. I'm really interested in trying this with my bike sometime over the winter. Just need to pick the right colors.
#10
Senior Member
Join Date: Jun 2008
Location: Louisville, KY
Posts: 13,553
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 4196 Post(s)
Liked 2,912 Times
in
1,781 Posts
Make sure you post pics when done. I think it sounds like it'd look cool.
__________________
Bikes: 1996 Eddy Merckx Titanium EX, 1989/90 Colnago Super(issimo?) Piu(?),1990 Concorde Aquila(hit by car while riding), others in build queue "when I get the time"
Bikes: 1996 Eddy Merckx Titanium EX, 1989/90 Colnago Super(issimo?) Piu(?),
#11
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,852
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Mentioned: 584 Post(s)
Tagged: 0 Thread(s)
Quoted: 1908 Post(s)
Liked 574 Times
in
339 Posts
No, do not pick the right colors! That will tempt you to do a bike, which would be bad, because your first attempts will not come out as well as later ones. Look on the shelf in the basement and see what open cans of rustoleum etc have been kicking around since the Bush administration. Preferably different kinds of paint, like a metallic aluminum plus a gloss blue enamel plus a flat black enamel, so they don't mix readily. If you don't have any, your neighbors do. Fool around with disposable stuff before buying anything.
#12
Senior Member
Join Date: Oct 2013
Location: Roanoke, Va
Posts: 997
Bikes: 2013 leader 721. 2015 leader 725. 2012 fuji feather
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
No, do not pick the right colors! That will tempt you to do a bike, which would be bad, because your first attempts will not come out as well as later ones. Look on the shelf in the basement and see what open cans of rustoleum etc have been kicking around since the Bush administration. Preferably different kinds of paint, like a metallic aluminum plus a gloss blue enamel plus a flat black enamel, so they don't mix readily. If you don't have any, your neighbors do. Fool around with disposable stuff before buying anything.
so anything oil based will work?
#13
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,852
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Mentioned: 584 Post(s)
Tagged: 0 Thread(s)
Quoted: 1908 Post(s)
Liked 574 Times
in
339 Posts
That is exactly the question to ask. Yes, basically, what "works" is anything that floats on top of the water and sticks to what you dip in it. But some things, and in particular some combinations, will work better than others. I don't follow instructions well, and when I go to the store to buy exactly the right thing, they invariably have something slightly different anyway. So when I do a project like this, I'm going to be winging it. That's what i suggest you do as well.
By the way, you're going to have to thin the paints to a watery consistency. There are a lot of thinners, with labels like Mineral Spirits, Paint Thinner, Lacquer thinner, Turpentine, "Turpatine", Naphtha, denatured alcohol, and so on. Some will work, some will not work. Among those that work, some will work better than others. You can also use drying oils like linseed oil to thin some paints. Experiment.
A good experiment might be to spray a lot of empty beer bottles with a light colored primer, marble them, and clearcoat them.
By the way, you're going to have to thin the paints to a watery consistency. There are a lot of thinners, with labels like Mineral Spirits, Paint Thinner, Lacquer thinner, Turpentine, "Turpatine", Naphtha, denatured alcohol, and so on. Some will work, some will not work. Among those that work, some will work better than others. You can also use drying oils like linseed oil to thin some paints. Experiment.
A good experiment might be to spray a lot of empty beer bottles with a light colored primer, marble them, and clearcoat them.
#14
sqrl
Join Date: Apr 2011
Location: Chicago
Posts: 1,168
Bikes: bieks
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
This guy does it with car parts and just shakes the part back and forth to push the extra paint to the edges before pulling the piece out:
#15
Iregular
Join Date: Dec 2013
Location: Croatia
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I've been thinking about this for quite some time since my frame is due for painting.
Would love to se if anyone has done it and get some feedback and tips.
Would love to se if anyone has done it and get some feedback and tips.