Track Ends
 

I want to braze some track ends into an old shcwinn frame, but i'm having trouble finding any of them for sale. Are there any online besides the ones paul make that any of you know about.

Not much of a frame builder of myself (note: check out/ ask in the framebuilders section of bikeforums ;) ); but a simple googling of "bicycle frame building supplies" looked promising.

This is where Bilikey gets a lot of their supplies. These were the two options I was given for my frame.

http://www.cycle-frames.com/bicycle-...ess-steel.html

http://www.cycle-frames.com/bicycle-...DROP-REAR.html

Henry James: http://www.henryjames.com/productlug.html#laserdo

Nova Cycles Supply: http://www.cycle-frames.com/bicycle-...OPOUTS/?page=3

Ceeway: http://ceeway.com/NEWPARTSPAGES/Forged%20Dropouts.htm

http://ceeway.com/NEWPARTSPAGES/Cast%20Dropouts.htm

HTH...

http://www.paragonmachineworks.com/c...&category=0005

Here's where I got mine for my 79 Schwinn. Be sure you use the steel ones for 24.00 and not the Titanium for 54.00. The pics look identical and they don't specify real well.

The set from HJ or the ugly ones from Nova are your best best as they will cover a wider range of ss/cs angles than the Paragons will.

this