well you guys must have a lot of padding on your arses. i can ride my toupe forever with bibs without discomfort, but after 5-10 miles without bibs it kills me.
|
Originally Posted by Mumonkan
(Post 14515497)
scrod,
is the 722 RS still being made? do they have the same geometry as the TS? |
Ill have to check that out
Do you think leader would give me a geo chart if i mailed them? Or are they tight lipped with that kinda thing unless youre a dealer |
I talk to them every day. I'll see if I can get the chart for you.
|
<3
|
I already asked this question in another thread, but I figure if anyone knows - it would be you.
How do you pronounce Nitto? (neato? or nitto?) |
Most commonly, nee-toh. We may need to get someone Japanese up in here but I believe the proper pronunciation is closer to nit-tou.
I try to say it aloud as little as possible. :lol: |
Originally Posted by Scrodzilla
(Post 14516770)
Most commonly, nee-toh. We may need to get someone Japanese up in here but I believe the proper pronunciation is closer to nit-tou.
I try to say it aloud as little as possible. :lol: |
It's best to say it with an aggitated tone, and a bit of a rising growl, in a karate stance whenever possible. Preferrably while breaking a brick on the "toh", like so...
http://gifs.gifbin.com/082010/128082...arate-chop.gif |
from my forays trying to learn japanese, which "syllable" is emphasized is everything
2 words will be "spelled" exactly the same but you pronounce one letter different and youre talking about couches instead of jumping or something |
Scrod: Have you put together a list of go-to parts, components, bikes, et al? I saw on your pedalroom that you said something about a certain chain, how you would not buy any other chain. I think it would be a good resource to have a few lists of what you think are the best things out there right now... actually, three lists, like a budget list, a main-line list, and a top of the line list. I imagine that some items may be the same across lists because some budget items are the best you can get, but whatever.
I know it could be a pain to maintain as products come and go, but it could be helpful and if you linked to products you might find a way to monetize it (assuming you link to some products that you do not sell). |
Since Japanese has pitch-accent rather than stress-accent none of these various spellings/boldings are likely to capture the actual native pronunciation, which is part of the source of confusion. I believe that the high front vowel is always tense /i/ and so "neato" is probably closer to it. As the accent is lexical and not represented by the spelling, we would need a native Japanese speaker to say whether Nitto has an accent or not.
/notscrod /too many years as fricking linguist even though I don't really know phonology |
Sort of a carry-over from my question in RG - I did a spoke length calc. for an A23/chub road front build (24 hole, 3-cross) and it told me I need a 302.5mm spoke length. Sapim and Wheelsmith DB14's top off at 302. Am I just derping or should I rethink my build? Not dead-set on 24h but I'm a relatively light, small guy (5'6/150lbs) but also not bummed on the idea of likely having to retrue more than a 32h.
|
Is there any videos or pic tutorials on how to setup a brake lever? I just ordered some Cane Creek 200TT's and would not mind trying to put them on myself when they get here.
|
Originally Posted by solipsist716
(Post 14519887)
Sort of a carry-over from my question in RG - I did a spoke length calc. for an A23/chub road front build (24 hole, 3-cross) and it told me I need a 302.5mm spoke length. Sapim and Wheelsmith DB14's top off at 302. Am I just derping or should I rethink my build? Not dead-set on 24h but I'm a relatively light, small guy (5'6/150lbs) but also not bummed on the idea of likely having to retrue more than a 32h.
|
Originally Posted by Soo__Fuego
(Post 14520002)
Is there any videos or pic tutorials on how to setup a brake lever? I just ordered some Cane Creek 200TT's and would not mind trying to put them on myself when they get here.
|
Originally Posted by Bat56
(Post 14517455)
Scrod: Have you put together a list of go-to parts, components, bikes, et al? I saw on your pedalroom that you said something about a certain chain, how you would not buy any other chain. I think it would be a good resource to have a few lists of what you think are the best things out there right now... actually, three lists, like a budget list, a main-line list, and a top of the line list. I imagine that some items may be the same across lists because some budget items are the best you can get, but whatever.
I know it could be a pain to maintain as products come and go, but it could be helpful and if you linked to products you might find a way to monetize it (assuming you link to some products that you do not sell). |
Scrod,
Have you noticed that the seatpost clamps on the blue EAI BK frames like yours look different than some of the others I have found on Pedalroom. Did they change it just for that particular color or are they changed in general? |
Hi Scrod,
I've been fond of my Durano Plus 25's, but might pick up a second pair of slightly wider and lightly treaded tires that would be almost as good on pavement, but also give me increased flexibility to ride unpaved/off-road paths more often. The Durano's ain't too comfortable in those situations, and I'm avoiding a lot of good paths nearby. I'm looking at the Panaracer Pasela TG's. I wouldn't get rid of the Duranos, but probably swap out every once in a while to mix things up. Not looking for anything as aggressive as cross tires...just some more width, comfort and slight tread while remaining very puncture-resistant. I see from Pedal Room that you've actually used both of these tires. Any thoughts on how the Panaracer and the Durano Plus subjectively feel as far as ride quality, rolling resistance, stability, etc.? Do the Panaracers feel less out of place on non-paved surfaces? I know it's hard to compare, so just any personal thoughts are appreciated. PS: I've read that the Panaracer 28's run a bit small. Do you know if the 32's are also small? 32 might be a bit big for my clearance, but if they are effectively smaller, I might consider them... |
Originally Posted by Scrodzilla
(Post 14510030)
I know this may be more than you asked for but I'm going into full detail just in case anyone else may be wondering too:
To use a 1 1/8" stem on a 1" steerer you will need a 1" to 1 1/8" shim and a 1 1/8" top cap. If you plan on using a spacer on top of the stem, that needs to be 1 1/8" as well. Any spacers below the stem must be 1". Do I cut the spacer to match the height of my stem? (It's a little bit taller.) |
Originally Posted by mkeHENRY
(Post 14523227)
So... I have more questions...haha...
Do I cut the spacer to match the height of my stem? (It's a little bit taller.) |
Originally Posted by Face Palm
(Post 14523082)
Hi Scrod,
I've been fond of my Durano Plus 25's, but might pick up a second pair of slightly wider and lightly treaded tires that would be almost as good on pavement, but also give me increased flexibility to ride unpaved/off-road paths more often. The Durano's ain't too comfortable in those situations, and I'm avoiding a lot of good paths nearby. I'm looking at the Panaracer Pasela TG's. I wouldn't get rid of the Duranos, but probably swap out every once in a while to mix things up. Not looking for anything as aggressive as cross tires...just some more width, comfort and slight tread while remaining very puncture-resistant. I see from Pedal Room that you've actually used both of these tires. Any thoughts on how the Panaracer and the Durano Plus subjectively feel as far as ride quality, rolling resistance, stability, etc.? Do the Panaracers feel less out of place on non-paved surfaces? I know it's hard to compare, so just any personal thoughts are appreciated. PS: I've read that the Panaracer 28's run a bit small. Do you know if the 32's are also small? 32 might be a bit big for my clearance, but if they are effectively smaller, I might consider them... |
Originally Posted by mkeHENRY
(Post 14523227)
So... I have more questions...haha...
Do I cut the spacer to match the height of my stem? (It's a little bit taller.) E: that'll teach me to reply to a stale thread without refreshing it first. |
Originally Posted by Scrodzilla
(Post 14523305)
Pasela TGs are awesome on hard-packed gravel and such and they have great rolling resistance if you keep them inflated a little over the recommended PSI. I love them. The TGs do run a little small, though.
|
Originally Posted by Scrodzilla
(Post 14523294)
Assuming you mean the shim, using a small (2.5mm) 1 1/8" spacer above the stem will solve your problem.
|
All times are GMT -6. The time now is 11:16 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.