My new build, Chimo fixed
2 Attachment(s)
Well, haven't been on here in about 2 years. Anyway I picked up an 80's Chimo that im rebuilding. I'll update as I go
http://bikeforums.net/attachment.php...hmentid=246552 Ordered these to replace the 27's http://bikeforums.net/attachment.php...hmentid=246551 |
Whenever I see the word "chimo" I think... child molester.
|
1 Attachment(s)
Originally Posted by gigantor
(Post 14144880)
Whenever I see the word "chimo" I think... child molester.
http://bikeforums.net/attachment.php...hmentid=246752 |
1 Attachment(s)
New shoes came in today
http://bikeforums.net/attachment.php...hmentid=247097 |
Cottered cranks in the 80s?
Wow. |
Been a long time since I've heard of "Chimo."
I used to work for the importer. |
2 Attachment(s)
|
|
1 Attachment(s)
How does everyone feel about the rear rack?
http://bikeforums.net/attachment.php...hmentid=250493 |
looks ok
|
Rack looks good, but now the brake is gone. Curious, why did you opt for it in the rear and not front (the brake)?
|
Youre missing a brake on the front: unless you're riding freewheel with just back brake (not safe) or you're riding fixed with a back brake (pointless)
|
First off I didn't ask about the brake lol. I was only running the rear temporarily till my front caliper arrives (today). I am WELL aware that the rear only sucks a fat one :thumb:
|
Rack looks good, clean bike.
|
Bike and the rack look good. Nice job.
Foot retention? |
Originally Posted by Jared.
(Post 14232383)
Bike and the rack look good. Nice job.
Foot retention? |
|
really... find a new gif brah
|
Originally Posted by Nagrom_
(Post 14234333)
really... find a new gif brah
|
3 Attachment(s)
Got some platforms, clips and straps from my lbs today. Supposedly the first sealed bearing road pedal, either way I like them.
http://bikeforums.net/attachment.php...hmentid=251101 http://bikeforums.net/attachment.php...hmentid=251102 Also got the front brake done finally. Bike is pretty much finished for now http://bikeforums.net/attachment.php...hmentid=251103 |
That came out really well, man.
|
Looks good, fattony.
|
Thanks guys
|
Originally Posted by Jaytron
(Post 14234346)
Originally Posted by Nagrom_
(Post 14234333)
really... find a new gif brah
Neato build, OP. |
I was looking to buy that same wheelset (Amelia from Eighth Inch?). Any complaints?
|
Originally Posted by wolfparty
(Post 14258581)
I was looking to buy that same wheelset (Amelia from Eighth Inch?). Any complaints?
|
1 Attachment(s)
|
Looks like you've got mad clearance available on the back wheel, always nice to have options! What's up with the cross lever but no tape on the flats? Seems a bit backwards how that is all set up.
I don't care one way or another, but if this thread was started today it would get flamed and closed. Or just closed, depending on who got here first. Just sayin. Thats a nice bike. Looks good. |
If mine, I would have done a full tape with hoods for the extra hand position.
Looks good. |
Originally Posted by Bat56
(Post 14814284)
Looks like you've got mad clearance available on the back wheel, always nice to have options! What's up with the cross lever but no tape on the flats? Seems a bit backwards how that is all set up.
I don't care one way or another, but if this thread was started today it would get flamed and closed. Or just closed, depending on who got here first. Just sayin. Thats a nice bike. Looks good. |
All times are GMT -6. The time now is 07:40 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.