Actual Experience re: slipping cogs
#1
Senior Member
Thread Starter
Join Date: Jan 2005
Posts: 331
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Actual Experience re: slipping cogs
hey guys-
i have read all of the threads on the loctite method of fixing an old rear wheel (with or without lockring)- it seems that some have a story of my buddy was running that system and his cog slipped, and he was hit by a bus, and his wife left him...
so, my question- what are your experiences. who has actually had a cog slip using loctite? how often does this happen (skidding or no skidding).
I want personal stories- I want carnage...
let me know.
perhaps a poll will follow on this question.
zgjd
i have read all of the threads on the loctite method of fixing an old rear wheel (with or without lockring)- it seems that some have a story of my buddy was running that system and his cog slipped, and he was hit by a bus, and his wife left him...
so, my question- what are your experiences. who has actually had a cog slip using loctite? how often does this happen (skidding or no skidding).
I want personal stories- I want carnage...
let me know.
perhaps a poll will follow on this question.
zgjd
#2
SuperstitiousHyperrealist
Join Date: May 2004
Location: Boston
Posts: 433
Bikes: unknown road conversion, half built Benotto track
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by zoeglassjd
hey guys-
my buddy was running that system and his cog slipped, and he was hit by a bus, and his wife left him...
I want personal stories- I want carnage...
let me know.
my buddy was running that system and his cog slipped, and he was hit by a bus, and his wife left him...
I want personal stories- I want carnage...
let me know.
Jerry Springer - Fixed Gear Edition. Sweet.
#3
Track Rat
Join Date: Dec 2004
Location: Pittsburgh, PA
Posts: 128
Bikes: To many
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
i don't have a carnage story for you, but i had that setup on my commuter for a while witha front brake, well, i used a lighter formula of locktite due to availability and started slowing down as i approached a three-way intersection, the lockring and cog decided to unscrew, the cog wedged itself inbetween the hub and frame, the chain locked up, i got a nice scratch on my crank from the chain jumping and my rear tire locked up. luckily i was going pretty slow and the roads were wet and semi-iced.
so i just slid on my rear tire for a few feet.
got it fixed up again and went on my way,
so i just slid on my rear tire for a few feet.
got it fixed up again and went on my way,
#4
Better than you since 83!
Join Date: Oct 2004
Location: Up a big F'ing Hill
Posts: 1,117
Bikes: Fixed Gear 79 Schwinn Sprint
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Been riding with just a screw on cog with no loctite and no lockring, waiting for enough money for a new wheelset. I haven't died yet. To be honest my cog hasn't even unscrewed in the slightest. I skip and skid, as well as back pressure. Now I also have a front brake that I use quite regularly. To any effect, here's my anecdotal evidence for you.
#6
Junior Member
Join Date: Sep 2004
Posts: 19
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Happened to me twice; once at the bottom of a big hill at high speed, which was a bit exciting -- cog unscrewed as I was trying to slow down before some traffic lights, chain came off, back wheel locked up and I skidded to a stop cursing a lot. Second time was just because I was trying to slow down a bit too hard. No damage to me/bike either time, but it left me very wary indeed.
This was using blue loctite and no lockring -- I'm really not a heavy rider, so I reckon that version just isn't strong enough. Red loctite is much better, no problems with that except that you need to use a blowlamp to melt it if you ever need to take the cog off to fix broken spokes or whatever.
-- dan
This was using blue loctite and no lockring -- I'm really not a heavy rider, so I reckon that version just isn't strong enough. Red loctite is much better, no problems with that except that you need to use a blowlamp to melt it if you ever need to take the cog off to fix broken spokes or whatever.
-- dan
#8
loves living in the city.
Join Date: Oct 2004
Posts: 891
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by zoeglassjd
i guess "having to use a blowlamp to melt it" is a good sign...
Not if you have to replace spokes.
#10
old codger
Join Date: Sep 2004
Location: Victoria B.C.
Posts: 1,124
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Red locktite melts at 'xx' temperature which can be obtained with either a propane torch or a heat gun. A hair dryer will not quite do it. Beware that grease smokes at that temperature, so do it outside. Red locktite is strong to something like 5,000 lbs force. The alternater on my Suzie 750 was glued on to the end of the crankshaft this way with no spline or lockring, this is why I know this. That engine developed 110 horsepower, can you?
#11
The King of Town
Join Date: Mar 2004
Location: Richmond, VA
Posts: 681
Bikes: Haro Backtrail 20" (MISSING), Fuji Berkeley fixie, Huffy cruisercommuterdeathmobile
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I've had pretty much the same experience as junioroverlord.
#12
Senior Member
Join Date: Jan 2005
Location: Los Angeles
Posts: 2,047
Bikes: Custom Holland Ti road bike, Custom track bike I traded a painting for.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I ride a track bike with a flip flop. After my friend helped me build my bike i rode it around for a few days without any problems. I wasn't skidding, I was merely backpedaling or resisting when a light suddenly changed, i rushed to stop and really cranked down and it slipped because my cog and lockring weren't tight enough. I guess i had to break the bike in. anyhow, i just rolled right into the intersection and almost ran some people over, i hung a right to avoid traffic and everything turned out okay. Sorry, no carnage.