Brake thoughts- XTR vs Avid disc
#1
Senior Member
Thread Starter
Join Date: Mar 2007
Location: Portland, OR
Posts: 571
Bikes: Lots
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
2 Posts
Brake thoughts- XTR vs Avid disc
Looking for some input, thoughts and comments concerning our new build. We're a 290lb tandem team that rides pretty quick. We usually go out with the 21mph Saturday single group at our club ride. We climb very strong and aren't afraid to hit 50mph on good, safe, clear vision downhills. We live just west of Portland, Oregon at the base of the coast range so we have some serious clinmbs right out our front door.
Anyway, I'm building a new bike for us and have the choice of using an XTR V-brake(?) or Avid road disc on the rear. Previously our bike had XTR's front and rear and they worked pretty darn good but that was our only option as the frame wasn't disc compatible. I'm using either a Campy Record or Mavic front caliper and the rear is undecided.
I've never ridden a disc bike and haven't read much good or bad about their performance on tandems. Just curious what folks think that have been where I am with making this choice. Also, I already own both brakes so cost/investment plays no part of the decision.
Thanks a bunch, great group with an amazing amount of useful info. We're new here and look forward to becoming active participants in this forum.
As soon as I figure out the photo posting thing I'm provide pics of our current ride and provide a blow by blow photo essay of the new build. It's currently at the paint shop for a custom spray and will return in 11 days for the "operation" to begin...
It'll make it's debut at the Monster Cookie Metric century on April 29th in Salem, Oregon.
Ride safe!
KRhea
PortlandVelo.net
Anyway, I'm building a new bike for us and have the choice of using an XTR V-brake(?) or Avid road disc on the rear. Previously our bike had XTR's front and rear and they worked pretty darn good but that was our only option as the frame wasn't disc compatible. I'm using either a Campy Record or Mavic front caliper and the rear is undecided.
I've never ridden a disc bike and haven't read much good or bad about their performance on tandems. Just curious what folks think that have been where I am with making this choice. Also, I already own both brakes so cost/investment plays no part of the decision.
Thanks a bunch, great group with an amazing amount of useful info. We're new here and look forward to becoming active participants in this forum.
As soon as I figure out the photo posting thing I'm provide pics of our current ride and provide a blow by blow photo essay of the new build. It's currently at the paint shop for a custom spray and will return in 11 days for the "operation" to begin...
It'll make it's debut at the Monster Cookie Metric century on April 29th in Salem, Oregon.
Ride safe!
KRhea
PortlandVelo.net
#2
hors category
Join Date: Jan 2002
Posts: 7,231
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
IMHO, go with the Avid mech disc but have your builder include the necessary drilled brake bridge and cable guides to support a rear caliper just to keep your options open for the future, e.g., fitting a rear caliper wired to your brake lever and adding a bar-con to control the disc for European switchbacks, etc...
FWIW: We have one road tandem with dual Record calipers and the other has the hybrid system with a Campy caliper up front and the Avid mech disc on the rear. This gives me a frequent reminder of how much added control and utility the rear disc provides vs. a rear caliper. The only thing that a rear disc can't do for you is alleviate hand cramps from prolonged braking on very long, high-brake demand descents which is where the alternative configuration mentioned above comes back into play.
FWIW: We have one road tandem with dual Record calipers and the other has the hybrid system with a Campy caliper up front and the Avid mech disc on the rear. This gives me a frequent reminder of how much added control and utility the rear disc provides vs. a rear caliper. The only thing that a rear disc can't do for you is alleviate hand cramps from prolonged braking on very long, high-brake demand descents which is where the alternative configuration mentioned above comes back into play.
#3
Senior Member
Join Date: Dec 2003
Location: Tucson, AZ
Posts: 11,016
Bikes: Custom Zona c/f tandem + Scott Plasma single
Mentioned: 3 Post(s)
Tagged: 1 Thread(s)
Quoted: 77 Post(s)
Likes: 0
Liked 19 Times
in
11 Posts
For a team in your weight class and agressive/hilly riding would agree with rear Avid disc + the option of also putting on a rear V-brake.
Have test ridden one tandem with discs front and rear (an Avid rear and Hayes front). Stopping power was awsome, however this was on a fast/short descent (just under 40 mph) riding the tandem solo. Didn't want to put stoker Kay through full speed descent then hit the brakes scenario.
Discs tend to present their own issues, and some folks still prefer the Arai drum for prolonged descents.
We use a D/A front caliper and Tektro Mini V-brake on our tandem and are a sub-250 lb. 'older' duo. However, we no longer are in the go-fast/climb/descend any nountain full-tilt league. Been there, done that.
Pedal on TWOgether!
Rudy and Kay/zonatandem
Have test ridden one tandem with discs front and rear (an Avid rear and Hayes front). Stopping power was awsome, however this was on a fast/short descent (just under 40 mph) riding the tandem solo. Didn't want to put stoker Kay through full speed descent then hit the brakes scenario.
Discs tend to present their own issues, and some folks still prefer the Arai drum for prolonged descents.
We use a D/A front caliper and Tektro Mini V-brake on our tandem and are a sub-250 lb. 'older' duo. However, we no longer are in the go-fast/climb/descend any nountain full-tilt league. Been there, done that.
Pedal on TWOgether!
Rudy and Kay/zonatandem
#4
Senior Member
Join Date: Jun 2006
Posts: 106
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Liked 0 Times
in
0 Posts
TandemGeek,
I thought it was unsafe to use disc brakes as drag brakes (i.e., constantly applied) due to excessive heat build-up. Is this not true?
Thanks,
Daniel
I thought it was unsafe to use disc brakes as drag brakes (i.e., constantly applied) due to excessive heat build-up. Is this not true?
Thanks,
Daniel
Originally Posted by TandemGeek
IMHO, go with the Avid mech disc but have your builder include the necessary drilled brake bridge and cable guides to support a rear caliper just to keep your options open for the future, e.g., fitting a rear caliper wired to your brake lever and adding a bar-con to control the disc for European switchbacks, etc...
FWIW: We have one road tandem with dual Record calipers and the other has the hybrid system with a Campy caliper up front and the Avid mech disc on the rear. This gives me a frequent reminder of how much added control and utility the rear disc provides vs. a rear caliper. The only thing that a rear disc can't do for you is alleviate hand cramps from prolonged braking on very long, high-brake demand descents which is where the alternative configuration mentioned above comes back into play.
FWIW: We have one road tandem with dual Record calipers and the other has the hybrid system with a Campy caliper up front and the Avid mech disc on the rear. This gives me a frequent reminder of how much added control and utility the rear disc provides vs. a rear caliper. The only thing that a rear disc can't do for you is alleviate hand cramps from prolonged braking on very long, high-brake demand descents which is where the alternative configuration mentioned above comes back into play.
#5
Senior Member
Join Date: Jan 2005
Posts: 842
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
We have the setup that TandemGeek describes. We use the disc brake to give my hand and the rim a brake on prolonged/steep descents. As soon as I find some time I will add a bar-mounted in-line lever to the disc brake. That way we will use it to modulate speed while turning also. If the disc proves that is enough to slow our rig down to safe speeds coming down 10% + laberiths, we may remove the rim brake then. We are a 300 lb. team and droping!
#6
Time for a change.
Join Date: Jan 2004
Location: 6 miles inland from the coast of Sussex, in the South East of England
Posts: 19,913
Bikes: Dale MT2000. Bianchi FS920 Kona Explosif. Giant TCR C. Boreas Ignis. Pinarello Fp Uno.
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times
in
4 Posts
Thoughts to me are that rim breaks wear out rims and disc breaks wear out---Not much really except pads. Both brakes are good so will be effective but if taking in long descents, there could be an advantage to having the "V" brake fitted as an extra brake.
I have discs on our Mountain tandem and they are effective. Top end hydraulics though so can't say a great deal about the Avids. Only suggestion is to get a Large Disc, at least 180mm, as this will give more effective braking and stay cooler. We have 200mm discs front and rear, and you want to hear the Solo riders gasping for breath with envy when they see them.
As to using Disc brakes as a drag brake- There is a technique for using them on downhills- but we have never had an overheating problem and that was even after getting them to a dull orange glow on one particular steep downhill.
I have discs on our Mountain tandem and they are effective. Top end hydraulics though so can't say a great deal about the Avids. Only suggestion is to get a Large Disc, at least 180mm, as this will give more effective braking and stay cooler. We have 200mm discs front and rear, and you want to hear the Solo riders gasping for breath with envy when they see them.
As to using Disc brakes as a drag brake- There is a technique for using them on downhills- but we have never had an overheating problem and that was even after getting them to a dull orange glow on one particular steep downhill.
__________________
How long was I in the army? Five foot seven.
Spike Milligan
How long was I in the army? Five foot seven.
Spike Milligan
Last edited by stapfam; 04-07-07 at 12:21 AM.
#7
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
Originally Posted by dsmyers
TandemGeek,
I thought it was unsafe to use disc brakes as drag brakes (i.e., constantly applied) due to excessive heat build-up. Is this not true?
Thanks,
Daniel
I thought it was unsafe to use disc brakes as drag brakes (i.e., constantly applied) due to excessive heat build-up. Is this not true?
Thanks,
Daniel
#8
Senior Member
Join Date: Mar 2007
Posts: 122
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by Retro Grouch
I have some personal friends who melted tha plastic parts on their Avid caliper while riding in Italy last summer. They have switched back to using Santana's Formula hydraulic brake.
I look at the Avids as being a disposable product in times of emergency. Rarely do I ride super steep, switchback roads where I have to ride the brakes. I figure, that if it becomes absolutely necessary I will just cook the Avids and purchase new ones or rebuild the calipers (they really are quite inexpensive). I have heard that they melt but will continue to function. They may even have a higher heat tolerance compared to some hydraulics that will just boil over and stop functioning.
I am a motorcycle rider and brakes are a similar consideration. At this point motorcycle brakes are so good that it is a none issue, they can dissipate heat at an amazing rate. Hopefully, someday we have a great road hydraulic option too. Until then the Avids seem to be the ticket.
#9
Senior Member
Join Date: Jan 2005
Posts: 842
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by Retro Grouch
I have some personal friends who melted tha plastic parts on their Avid caliper while riding in Italy last summer. They have switched back to using Santana's Formula hydraulic brake.
#10
Version 7.0
Join Date: Oct 2006
Location: SoCal
Posts: 13,118
Bikes: Too Many
Mentioned: 297 Post(s)
Tagged: 0 Thread(s)
Quoted: 1338 Post(s)
Liked 2,473 Times
in
1,448 Posts
Originally Posted by Retro Grouch
I have some personal friends who melted tha plastic parts on their Avid caliper while riding in Italy last summer. They have switched back to using Santana's Formula hydraulic brake.
We have one high speed 5 mile > 5% grade descent using the brake as a drag brake to control speed. It worked fine with no fade. Took it to the LBS for inspection afterword and decided to replace the pads. The brake had ~1000 miles. We are going to Tuscany this year and I will report back the brake experience. I am taking a couple of sets of extra pads.
#11
hors category
Join Date: Jan 2002
Posts: 7,231
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
Originally Posted by dsmyers
I thought it was unsafe to use disc brakes as drag brakes (i.e., constantly applied) due to excessive heat build-up. Is this not true?l
Here's the deal: In the case of disc brakes, as the rotor approach the upper-end of the caliper & rotor heat capacity the operator will begin to hear and feel the distinctive effects of brake pad outgassing and glazing which will only get worse and is accompanied by the loss of braking power, aka. heat induced brake fade. The same thing happens with rim brakes, except that unlike the mechanical discs which limit the heat build up to the rotor, hub, caliper and cable/housing, rim heating migrates into the tires and tubes and can create a situation where a tire "blows off" a rim: a catastropic failure mode. If anyone is struggling to understand what I mean by the sound and feel of brake's outgassing most teams have probably experienced it on any hilly, regular ride where they apply maximum braking near the bottom of a steep hill: it's that 'griding' sound and vibration that occurs just before you've finally got it slowed down enough to either finish the stop or move on. It's not a bad thing near the bottom of a hill that you're familiar with; however, it is a problem when you're 1/2 way down an 5,000 ft descent that you're unfamiliar with.
The only way that I know of to create a catastropic failure mode with a mechanical disc brake is to continuously apply both front and rear brakes to the point where both brakes are allowed to acheive heating points where they can both suffer nearly compete brake fade before the tandem is safely brought to a stop. Again, this suggests that the captain was unaware of how to properly use his braking systems or of the warning signs associated with a brake system exceeding its heat capacity and the need to bring the bike to a stop so that the brake system can cool-off before resuming the descents.
IMHO, continuing to make a long and challenging unfamiliar descent on any brakes after there are obvious signs of fade is analogous to riding with tire that is going flat; you either figure out "something's not right here" or end up skidding around on a metal hoop with a tire jamed in your fork or rear stays. However, I suspect that many captains may not have received sufficient instruction or taken time to appreciate what brake fade is and how it works and assume that "discs" will simply work under all conditions... which is simply not true of discs or any brake system.
Since they were mentioned, let me note here, hydraulic brakes are different in that as they overheat they can transmit the heat into the fluid as well as the non-metallic hydraulic lines. As hydraulic fluid heats it expands and even in an open system you can reach a point where the expanding fluid will no longer allow you to release the pads from the rotor. In off-road conditions the affected wheel / brake simply lock up and drag you to a stop in the dirt. However, the high friction roads will keep that wheel turning on the outgassing, fully glazed-over brake pads (to no effect other than heat generation) and at some point a hydraulic line or seal will let go: that is a catastrophic failure mode, i.e., your brake is now inoperable. I bring up this little problem with hydraulic brakes to underscore that to my knowledge the only tandem disc brake systems in recent times to suffer catastrophic failures have been hydraulic systems, not mechanical. Yes, there have been all kinds of profound warnings and cited test results that suggested the Avid brakes were "not safe for tandems" but despite asking for real world examples over the past 4 years I have yet to hear of anything other than melted plastic knobs. Santana's introduction of the all metal WinZip mechanical disc caliper is, in fact, the solution to their Formula disc. The Formula, to its credit, when set up properly and given the necessary attention to routine adjustments, is an outstanding brake. However, in the real world, most owners neither had the knowledge or access to mechanics who knew how to work on those brakes and therein was the weakness in that system. The Avid is a no-brainer, the Winzip, from most accounts, is far easier to set up and adjust than the Formula, but not a no-brainer.
So, getting back to Avids, yes you can melt the red plastic knobs (they're replaceable and cheap, by the way), probably the nylon seal/cap, you can even melt the plastic cable housing and teflon liner but not the metal inner housing, you can end up with a warped disc, and although I haven't heard of it happening with a rotor, I suspect you might cook the grease out of your rear hub's bearings as has been reported a few times with drum brakes that were severely overheated. But, other than "losing both your brakes" due to rider-induced brake fade while still underway, the mechanical brake will not come apart UNLESS there is some type of plastic part sitting in the reaction arm, cams, or retention screw and nut that holds the whole thing together that I'm not aware of.
The combination of the Avid's excellent performance and higher-than-rim-brake heat tolerance with non-catastrophic failure mode is why disc brakes have become very popular as a rear brake alternative for teams that don't need or want a drum brake on their tandem for any one of a variety of reasons. As for your original question about their use as a drag brake, let me be the first one to suggest that almost anyone with one of these Avid rear discs is already using it as a drag brake... it's hard not to because it just works so darn well. What I mean is, because a rear disc is so much more effective than a rear rim brake I know that I find myself biasing my downhill braking to 75% rear / 25% front, using the front only for more aggressive braking action in combination with the rear, particulary when it's wet. Now, while I'm not doing the "set-it-and-forget-it" drag brake operation normally associated with an Arai drum brake, in many cases and on very steep, twisty descents the effect is the same: that rear brake is on A LOT... as in a lot more than it would be if it was a rim brake as I still remain ever mindful of rim heating given that we run very high pressure, narrow tires. As the terrain gets steeper and more challenging, the brake use goes into alternating front on / back off then front off / back on brake use to make sure that neither brake is allowed to climb into unchecked brake fade, thereby ensuring that I always have sufficient brake capacity to bring our tandem to a stop if needed.
This then brings us full circle to the Avid as a drag brake. No, I wouldn't recommend the rear rim / Avid as a defacto "default" set up on any tandem or for any team that truly needs a drag brake: that's the realm of the Arai drum brake and always will be until something better comes along. However, what what you describe about yourself and the way you ride, the rear Avid with front caliper will be all you need for nearly all of your domestic riding. However, if you should happen to venture into the mountains where some type of supplemental braking system is recommended by the tour leaders or anyone familiar with the route, prudent use of a dual caliper braking system with an Avid disc judiciously employed as a "supplemental" brake should allow you to make the most challenging descents in a safe and controlled, non-stop manner if you so choose. Add 100lbs to your team weight or cut your experience level as a cyclist by 75%, and the recommendation quickly changes, as would steering someone who is rather large away from the authentic Chippendale side chair.
P.S. With regard to XTR V-brake vs. Caliper, while linear pull brakes have more stopping power it's almost a moot point on the rear wheel since either a caliper or linear pull brake will lock up the rear wheel under near panic braking with the front brake fully applied and heat capacity is the same for either. My take is, if you have caliper front, have caliper rear. If, however, you have linerar pull / bosses on the front, go with linear pull / bosses on the rear.
Last edited by TandemGeek; 04-07-07 at 10:15 AM.
#12
hors category
Join Date: Jan 2002
Posts: 7,231
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
Originally Posted by Retro Grouch
I have some personal friends who melted tha plastic parts on their Avid caliper while riding in Italy last summer. They have switched back to using Santana's Formula hydraulic brake.
Why do they believe the Formula would have been any less resistant to overheating than the Avid?
Last edited by TandemGeek; 04-07-07 at 10:05 AM.
#13
Cyclist
Join Date: Apr 2004
Location: Wisconsin, USA
Posts: 166
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
We're a 270-280 lb team. We had two tandems when we lived in Beaverton: One with cantilevers and, later, one with NOS Campy sidepull brakes with Kool-Stop pads (have since changed to standard reach dual-pivot caliper brakes, but that' not part of this story). We had NO issues riding the West Hills (Skyline down Johnson/Logie), coast range, Laurel Mountain, or Mt. Hood on either bike. The only descent that gave me pause was Blooming-Fernhill, south of Forest Grove. Not for lack of braking power, but fear of overheating a rim/tire. [FWIW, I also stopped briefly to cool the rims when descending Mt. Ventoux a couple of years back -- auto traffic necessitated more braking than the mountain did.]
We have since moved to the Midwest, adopted a child, and acquired a triple, which has a rear Avid disc. I love the way the disc feels and stops the bike. We have kept a rear cantilever installed for safety (it's a triple after all, and my stokers are the most important people in my world). IMO, you can trust what Tandemgeek has to say about the Avid and discs in general.
Also IMO, If you want a light, fast, uncomplicated bike for a 290 lb team in all terrain, specify dual-pivot caliper brakes front and rear. If you appreciate the feel and extra security of a disc on the rear, go with the Avid.
We have since moved to the Midwest, adopted a child, and acquired a triple, which has a rear Avid disc. I love the way the disc feels and stops the bike. We have kept a rear cantilever installed for safety (it's a triple after all, and my stokers are the most important people in my world). IMO, you can trust what Tandemgeek has to say about the Avid and discs in general.
Also IMO, If you want a light, fast, uncomplicated bike for a 290 lb team in all terrain, specify dual-pivot caliper brakes front and rear. If you appreciate the feel and extra security of a disc on the rear, go with the Avid.
Last edited by bikeriderdave; 04-07-07 at 09:59 AM.
#14
Senior Member
Join Date: Mar 2007
Posts: 122
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I agree, dual pivot brakes are very good. My previous tandem, which I did not manufacture was a cannondale with dual pivots. I was a good bit lighter than now, but never had any issues with those brakes whatsoever.
I am heavier now, the team is heavier (heck, some of you guys are featherweights ) So I put the disks on the first tandem I have built for myself. They seem to work really well too. I love the front, I am luke warm about the back, the feel is not as good.
Can't go wrong either way IMHO. I would make a recomendation based on team weight really.
P.S. I could absoutely design a road lever with integrated hydraulic master cylinder but I wonder if the market is there. I would have to design with a certain group of calipers in mind (maybe only similar ones like the Gustav and Hope or something similar). I don't know if the road tandem crowd is ready to go dual hydraulic disk.
Also, if a certain company, lets say hope (I like Hope, I think any issues with Hopes are typically bicycle mechanics unfamiliarity with disc systems) was approached with enough orders in hand, I know they could be convinced to redesign a lever for this purpose. Same with Magura. It just would take some consensus of buyers, and that could be like hearding cats when it comes to cyclists.
All the best,
Dave Bohm
Bohemian Bicycles
I am heavier now, the team is heavier (heck, some of you guys are featherweights ) So I put the disks on the first tandem I have built for myself. They seem to work really well too. I love the front, I am luke warm about the back, the feel is not as good.
Can't go wrong either way IMHO. I would make a recomendation based on team weight really.
P.S. I could absoutely design a road lever with integrated hydraulic master cylinder but I wonder if the market is there. I would have to design with a certain group of calipers in mind (maybe only similar ones like the Gustav and Hope or something similar). I don't know if the road tandem crowd is ready to go dual hydraulic disk.
Also, if a certain company, lets say hope (I like Hope, I think any issues with Hopes are typically bicycle mechanics unfamiliarity with disc systems) was approached with enough orders in hand, I know they could be convinced to redesign a lever for this purpose. Same with Magura. It just would take some consensus of buyers, and that could be like hearding cats when it comes to cyclists.
All the best,
Dave Bohm
Bohemian Bicycles
#15
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
Originally Posted by TandemGeek
Did the Avid's fail catastrophically, require immediate replacement after the descent, or did they continue to work through the end of the tour with perhaps some maintenance after the overheat?
Why do they believe the Formula would have been any less resistant to overheating than the Avid?
Why do they believe the Formula would have been any less resistant to overheating than the Avid?
The fellow in question is a retired engineer and an excellent bike mechanic. He has extensive experience with the Formula disc brake. He originally got away from the Formula due to the slave pistons cocking after a period of wear. When they cock, they lock up the back wheel which can be solved by pushing the bike backward. He says the caliper has been redesigned to solve the problem.
My wife and I have a week long tour scheduled with them in August but we'll be riding in northern Wisconsin and are not anticipating any excess heat generating descents.
#16
Senior Member
Thread Starter
Join Date: Mar 2007
Location: Portland, OR
Posts: 571
Bikes: Lots
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
2 Posts
Thanks for all the great info. I think I'll go with my original idea of dual pivot caliper front with the Avid rear disc.
Really appreciate all the informative responses.
KRhea
PortlandVelo.net
Really appreciate all the informative responses.
KRhea
PortlandVelo.net
#17
Senior Member
Join Date: Dec 2003
Location: Tucson, AZ
Posts: 11,016
Bikes: Custom Zona c/f tandem + Scott Plasma single
Mentioned: 3 Post(s)
Tagged: 1 Thread(s)
Quoted: 77 Post(s)
Likes: 0
Liked 19 Times
in
11 Posts
If discs start 'glowing' it's time to stop and dump some of that excess water and create some steam! "Hiiiissss!"
Does that constitute a cheap way of heat-treating the disc?
Does that constitute a cheap way of heat-treating the disc?
#18
Super Modest
Join Date: Jun 2002
Location: Central Illinois
Posts: 23,456
Bikes: Trek Emonda, Giant Propel, Colnago V3, Co-Motion Supremo, ICE VTX WC
Mentioned: 107 Post(s)
Tagged: 1 Thread(s)
Quoted: 10957 Post(s)
Liked 4,613 Times
in
2,118 Posts
Originally Posted by TandemGeek
IMHO, go with the Avid mech disc but have your builder include the necessary drilled brake bridge and cable guides to support a rear caliper just to keep your options open for the future, e.g., fitting a rear caliper wired to your brake lever and adding a bar-con to control the disc for European switchbacks, etc...
Seriously, is it time that i started looking for a disc?
__________________
Keep the chain tight!
#19
hors category
Join Date: Jan 2002
Posts: 7,231
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
Originally Posted by Trsnrtr
Seriously, is it time that i started looking for a disc?
However, as a generic response let me note that it is this very question -- should we fit a supplemental brake for this tour? -- that folks in the light and middle weight classes always tend to have when headed off to new places with potentially steep descents in variable weather conditions that have given rise to the popularity of a mechanical disc as a primary rear brake. While it lacks the heat capacity of the Arai drum, the mechanical disc does trump the rear rim brake when pressed into service on challenging descents in dry or wet conditions and does so in a relatively lightweight, easy to service, and somewhat stylish package when compared to the Arai drum and earlier mechanical discs.
So, if like us, you've ever found yourself on a descent where you really needed that supplemental brake that you decided to leave at home, the mechanical disc is a welcome addition. And, as already noted in my first post, it can alternate duties as a primary rear brake without your rim brakes, or be pressed into service as a "supplemental" brake with your rear rim brake installed.
#20
Senior Member
Join Date: Dec 2003
Location: Tucson, AZ
Posts: 11,016
Bikes: Custom Zona c/f tandem + Scott Plasma single
Mentioned: 3 Post(s)
Tagged: 1 Thread(s)
Quoted: 77 Post(s)
Likes: 0
Liked 19 Times
in
11 Posts
Team weight/steep terrain/your nerves will dictate if a 3rd brake is mandatory.
Nobody says you have to descend full speed without stopping while descending a long pass.
Alternately applying front/rear brake, steadily, and not letting your speed build up too high can get most (but not all) couples down most descents.
We are a light team (sub-250 lbs) and have descended Kitt Peak in Arizona (altitude about 7,000+ ft, with 11 miles of curving 6 to 7% grade) with only one stop at mid-descent. Reason for the stop? Pilot's fingers were starting to cramp up from very fast alternating application of front and rear Mafac canti brakes. Felt the rims, and they were warm, but not hot. It had been predicted by 'experts' that we could not make that descent on our tandem without a 3rd brake and would suffer failure/blowout/overheated rims.
Have done many descents in mountainous terrain (as high as 9,200', but never Vail Pass).
Twisty descent down the Mogollon Rim near the town of Strawberry, AZ in a rain storm with us pedaling in fog/clouds. We out-braked a tandem that had 3 brakes. Experience/confidence/and knowing how to brake is a +.
That's our experience; yours may vary, so go with your gut instinct. If pilot/stoker want a 3rd brake for the Rockies, then do it.
Be safe and enjoy the scenery!
Pedal on TWOgether!
Rudy and Kay/zonatandem
Nobody says you have to descend full speed without stopping while descending a long pass.
Alternately applying front/rear brake, steadily, and not letting your speed build up too high can get most (but not all) couples down most descents.
We are a light team (sub-250 lbs) and have descended Kitt Peak in Arizona (altitude about 7,000+ ft, with 11 miles of curving 6 to 7% grade) with only one stop at mid-descent. Reason for the stop? Pilot's fingers were starting to cramp up from very fast alternating application of front and rear Mafac canti brakes. Felt the rims, and they were warm, but not hot. It had been predicted by 'experts' that we could not make that descent on our tandem without a 3rd brake and would suffer failure/blowout/overheated rims.
Have done many descents in mountainous terrain (as high as 9,200', but never Vail Pass).
Twisty descent down the Mogollon Rim near the town of Strawberry, AZ in a rain storm with us pedaling in fog/clouds. We out-braked a tandem that had 3 brakes. Experience/confidence/and knowing how to brake is a +.
That's our experience; yours may vary, so go with your gut instinct. If pilot/stoker want a 3rd brake for the Rockies, then do it.
Be safe and enjoy the scenery!
Pedal on TWOgether!
Rudy and Kay/zonatandem
#21
Super Modest
Join Date: Jun 2002
Location: Central Illinois
Posts: 23,456
Bikes: Trek Emonda, Giant Propel, Colnago V3, Co-Motion Supremo, ICE VTX WC
Mentioned: 107 Post(s)
Tagged: 1 Thread(s)
Quoted: 10957 Post(s)
Liked 4,613 Times
in
2,118 Posts
Originally Posted by zonatandem
That's our experience; yours may vary, so go with your gut instinct. If pilot/stoker want a 3rd brake for the Rockies, then do it.
Be safe and enjoy the scenery!
Pedal on TWOgether!
Rudy and Kay/zonatandem
Be safe and enjoy the scenery!
Pedal on TWOgether!
Rudy and Kay/zonatandem
__________________
Keep the chain tight!
#22
Senior Member
Join Date: Jun 2003
Location: Port Alfred, Eastern Cape, South Africa
Posts: 203
Bikes: el rapido road Tandem, Raleigh R6000 Road Tandem, Omega Vectra MTB Tandem, Gary Fisher Tassajara, Carerra MTB, Trek 7200 Hybrid
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
We just installed Hope Mono 4 disks with 180mm rotors on our MTB tandem. We live in Lagos Nigeria now and the bike is still in South Africa but it will come home after our home leave at the end of the month. These are four pot brakes and they are awesome!!!!!!!!
#23
pan y agua
Join Date: Aug 2005
Location: Jacksonville
Posts: 31,294
Bikes: Willier Zero 7; Merlin Extralight; Calfee Dragonfly tandem, Calfee Adventure tandem; Cervelo P2; Motebecane Ti Fly 29er; Motebecanne Phantom Cross; Schwinn Paramount Track bike
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1441 Post(s)
Liked 709 Times
in
363 Posts
Originally Posted by TandemGeek
Probably a good question for it's own thread, i.e., Anyone ridden Vail Pass on their Tandem?
#24
Senior Member
Join Date: Oct 2004
Location: Central California
Posts: 153
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
KRhea - We are a team of about your weight and speed. We have ridden tandems with rim brakes front and back, but certainly would not give up the Avid mech. disc we are now running. We think it is far superior to any rim brake we've tried. We have descended some of Northern California's steepest, most technical and most prolonged grades and still have not managed to melt the Avid's knobs. I can't imagine what a team of our weight would need to do to accomplish that! And even if the knobs did melt, as Tandemgeek points out, that's a lot better than blowing a tire off a rim (which is not at all uncommon when fast teams take on serious descents with only rim brakes - check the recent history of the Terrible Two Double Century!) or bursting a hydraulic seal (I was a certified brake mechanic in a former life and I wouldn't trust hydraulic brakes on my tandem - there's a reason cars are required to have dual hydraulic systems). Go with the mechanical disc. It's worth it for the peace of mind alone.
#25
Senior Member
Join Date: Dec 2003
Location: Tucson, AZ
Posts: 11,016
Bikes: Custom Zona c/f tandem + Scott Plasma single
Mentioned: 3 Post(s)
Tagged: 1 Thread(s)
Quoted: 77 Post(s)
Likes: 0
Liked 19 Times
in
11 Posts
In 200,000+ miles of tandeming without disc/drum brake and lots of long/steep descents we have never blown a tire/tube due to heat build up in the rim. Never melted pads either. But again, we are a light team. Have heard of (but not personally witnessed) folks blowing tires due to heat buildup. Have also heard of disc locking up due to excessive heat build up.
You make your choices! So far ours have all been good!
You make your choices! So far ours have all been good!