Stokker stem
#1
Senior Member
Thread Starter
Join Date: Jun 2006
Posts: 116
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Stokker stem
Hi,
I'm located in Europe and am looking for tandem stems online. Seems like none of the big online stores have them. I would like to have one that would seat the stokker nice and upright, if possible.
Horace
I'm located in Europe and am looking for tandem stems online. Seems like none of the big online stores have them. I would like to have one that would seat the stokker nice and upright, if possible.
Horace
#2
Senior Member
Join Date: Jan 2008
Location: Ft Worth, TX
Posts: 1,971
Bikes: Custom 650B tandem by Bob Brown, 650B tandem converted from Santana Arriva, Santana Noventa, Boulder Bicycle 700C, Gunnar Sport
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 23 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
#3
Junior Member
Join Date: Jan 2009
Location: Bristol, RI 02809
Posts: 8
Bikes: Calfee Tetra
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Talk to Mel. He will ship to Europe: https://www.tandemseast.com/parts/stems.html
#4
Tandem Vincitur
Join Date: Sep 2005
Location: Northern California
Posts: 3,317
Bikes: BMC Pro Machine SLC01, Specialized Globe, Burley Rock 'N Roll tandem, Calfee Dragonfly tandem.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
This topic was rehashed at length recently on this thread:
35 degree stoker stem
Peruse this thread, and then ask if you have any other questions.
35 degree stoker stem
Peruse this thread, and then ask if you have any other questions.
#5
Senior Member
Thread Starter
Join Date: Jun 2006
Posts: 116
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The stem I need needs to fit a 26.2 mm seatpost and a 25.4 handlebar clamp. I can't seem to find shims that will shim the modern stoker stems to 26.2 seatpost diameter. Do 26.2mm stoker stems exist?
#6
Senior Member
Join Date: Sep 2007
Location: Machias, WA
Posts: 718
Bikes: Rodriguez Toucan tandem, Rodriguez Rainer Lite sport/touring
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
R+E can make one up for you. See https://www.rodcycle.com/. On the left side click on "Other Stuff We Make" then click "Tandem Stoker Stem".
#7
Junior Member
This is easier than you think. First, figure out the clamp size on the stem you want to use. The link posted above to Tandems East's site shows a bunch of them and most are 29.8, so let's say you want to use a 29.8 stem. Tandems East will sell you a 29.8 to 26.2 shim that will be a direct fit for $12. However, if you are able to do a little work with a dremel tool and a file, you can get a cheaper shim to work. The commonest shims are to fit 27.2 or 25.4 seatposts into odd-sized frames. So 29.8 - 26.2 = 3.6mm, and 27.2 + 3.6 = 30.8. So buy a 27.2 to 30.8 shim, trim it a little, and use it to put a 29.8 stem on your 26.2 seatpost.
https://www.niagaracycle.com/categori...atpost-to-30-8
https://www.niagaracycle.com/categori...2-i-d-30-8-o-d
Last edited by WheelsNT; 07-15-13 at 12:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post
noglider
Classic & Vintage
12
05-02-16 09:26 AM