Bike Forums - Routing Bar end shifter cables without wrapping

Page 2 of 2

Show 30 post(s) from this thread on one page

Bike Forums (https://www.bikeforums.net/forum.php)

- Touring (https://www.bikeforums.net/touring/)

- - Routing Bar end shifter cables without wrapping (https://www.bikeforums.net/touring/1042337-routing-bar-end-shifter-cables-without-wrapping.html)

Aubergine

12-22-15 11:32 AM

Quote:

Originally Posted by niknak (Post 18407497)

Please post a photo of your knot. It's hard to believe that you can tie together two rigid cables without the ends fraying or the knot coming undone. Your technique could be a fine solution as a roadside repair.

I was making the wee jape. ;-)

pdlamb

12-22-15 01:10 PM

One of those cable connectors for S&S coupled bikes can also be used for the long cable run. It takes two cables (one front, one rear), but you don't have to worry about tandem cables. (I have a supply of tandem cables at home, but I never seem to take one when I'm traveling!)

All times are GMT -6. The time now is 06:09 PM.

Page 2 of 2

Show 30 post(s) from this thread on one page