Kickstand on Long Haul Trucker
|
:thumb:
|
I still like my Click-Stand!
|
:popcorn
|
Wow, this is super lame of Surly. They completely ripped off this guy's design. He's been making those for a number of years now.
Kickstand install | Long Haul Trucker Build.com |
Don't know about that. It seems there are only so many ways to design the retrofit piece needed. Sure that guy didn't rip his idea from some other thing he saw somewhere, sometime?
If you gave engineering students the task of mounting two plates across two hollow tubes many would probably come up with the same sort of solution. In the end, unless that guy planned to mass produce his product, it seems Surly has addressed an issue. |
I've never figured out a use for kickstands; there someone had to say it.
|
Originally Posted by Happy Feet
(Post 19228780)
In the end, unless that guy planned to mass produce his product, it seems Surly has addressed an issue.
|
Great to see, I will definitely get one when I get my LHT.
|
Only stubbornness keeps them from just telling The company that actually makes their frames, put a Kickstand plate on it ,
instead of the chainstay brace tube. Let the customer leave off the kickstand if they wish. I upgraded to this one.. http://www.treefortbikes.com/images/raw/KI5004.jpg you can actually make its length longer [try that with a hacksaw, have it grow back] |
That guy who sells kits on ebay is using a different design. I printed out his instructions to modify to make one for my Fargo, though apparently LHTs don't have the derailleur cable going through that area. Doh!
|
Anyone know how much they rip you for one of these?
|
:( :( :( Sad that Surly has changed its stance on kickstands :( :( :( *
*just kidding, having the choice is nice |
I'm waffling over putting one on my LHT now. Part of me says how nice it would be to just use the stand to rummage around in my bags and such, and the other part says no - to tough it out and live in defiance.
|
Originally Posted by NoControl
(Post 19230734)
I'm waffling over putting one on my LHT now. Part of me says how nice it would be to just use the stand to rummage around in my bags and such, and the other part says no - to tough it out and live in defiance.
Defiance of what? :twitchy: Ease of use? :p |
Salsa Another QBP brand leaves the Max Way shop with a Kickstand mount
Trek 520D uses the rear stand with 2 small bolts holding it on a raised Tab, so even lighter and right under your pannier Load. |
I don't think my Fargo has one, Bob.
|
Originally Posted by fietsbob
(Post 19231640)
Salsa Another QBP brand leaves the Max Way shop with a Kickstand mount
Trek 520D uses the rear stand with 2 small bolts holding it on a raised Tab, so even lighter and right under your pannier Load. Best Custom Bike Frames from Maxway Cycles |
Originally Posted by fietsbob
(Post 19229344)
Only stubbornness keeps them from just telling The company that actually makes their frames, put a Kickstand plate on it, instead of the chainstay brace tube.
Why, that would add at least $2 to their cost! I'll admit that their original "don't use a kickstand" blog post had me questioning the LHT design, build, and quality. |
Originally Posted by pdlamb
(Post 19234993)
Why, that would add at least $2 to their cost!
I'll admit that their original "don't use a kickstand" blog post had me questioning the LHT design, build, and quality. |
My Soma Saga has a kickstand plate for the chainstay bridge. Never mounted one on it but it's there if I need it :)
|
Originally Posted by elcruxio
(Post 19235171)
Why. A kickstand isn't necessary and is usually just extra bulk on the bike
Why, because the substantial fraction of people who want a kickstand on their bike would not be scare off! |
They can buy a different brand bike ..
I expect Maxway TW is the factory making Salsa, Surly ... And Soma for the 2 different importers.. it's what they do.. |
Originally Posted by pdlamb
(Post 19235301)
Why, because the substantial fraction of people who want a kickstand on their bike would not be scare off!
|
Posted here was a Fix.. Plug the chainstay tube from the BB shell end , fill the tube with Epoxy Putty ,
that gives you a solid filled area under the KS, that will not crush, so easily.. |
All times are GMT -6. The time now is 10:45 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.