![]() |
Recommendations on handlebar bags with map slot?
Open to all suggestions. Only have about 13 inches between handle bars to work with. Looking for waterproof and map slot, but any ideas are welcomed.
|
Originally Posted by Bobleo11
(Post 19338464)
Open to all suggestions. Only have about 13 inches between handle bars to work with. Looking for waterproof and map slot, but any ideas are welcomed.
You might instead opt for a regular map case and a separate bag without map case. When I was using my Topeak Tourguide Plus DX handlebar bag I found it hard to look at the map while riding since it's on the opposite side of the handlebars. The map case by itself goes in front over the stem and is much easier to read while riding IMO since it's right in front of you. This link is to the ACA Cyclesourse store where you can find all 3 of the products I mentioned... https://www.adventurecycling.org/cyc...words=map+case |
I really like the Jandd mountain handle pack IV, Mountain Handle Pack IV
It has an excellent attachment system. I like the size a lot (around 6 liters). That's enough for the stuff you really need ready to hand but it won't allow you to overpack (a larger bag will have more of an impact on steering). With the strap, you take it as a shoulder bag so you always have your valuables with you when you walk away from the bike. Edit: not waterproof but that's what plastic bags were designed to do; otherwise get an ortlieb. |
You wanna hold a map? Get this or something like it. Personally I've stopped using big-ole-handlebar-bags because they are rather heavy for what they are able to carry.
https://cdn.modernbike.com/256/main_IG2126176582.jpg BTW: I've stop using paper maps too. GPS and photo-map-images is all I use now. |
1 Attachment(s)
Who needs a map slot? A couple of of small binder clips on the lid of an Ortlieb Classic work perfectly.
|
Ortlieb with optional extender if needed for you bars.
|
how hard is it to ride and not have to look at a map every 400 yards?
I think I'm just spoiled in the mid west. |
Originally Posted by nun
(Post 19338731)
Who needs a map slot? A couple of of small binder clips on the lid of an Ortlieb Classic work perfectly.
Originally Posted by boomhauer
(Post 19339170)
how hard is it to ride and not have to look at a map every 400 yards?
|
Ortlieb makes a good waterproof bar bag and optional map holder. Both are waterproof.
http://i783.photobucket.com/albums/y...eb%20b-bag.jpg Dimensions can be found at: TheTouringStore.com ? Bicycle Touring and Commuting Panniers and Packs, Bicycle Racks and Other Touring Gear |
Originally Posted by jefnvk
(Post 19339283)
Until it rains.
|
I recently bought an Arkel small bag and it has an included clear plastic map holder that is really good quality. The one knock on the Arkel as you will see if you research these touring pages is that the bag's attachment system to the bike creates a noisy rattle that is kind of bothersome until you get used to it.
|
Originally Posted by robert schlatte
(Post 19339740)
I recently bought an Arkel small bag and it has an included clear plastic map holder that is really good quality. The one knock on the Arkel as you will see if you research these touring pages is that the bag's attachment system to the bike creates a noisy rattle that is kind of bothersome until you get used to it.
|
Originally Posted by nun
(Post 19339561)
A plastic bag protects the map from rain
However, I do you a PGS: Paper Guidance System (a/k/a a cue sheet). I simply carry a small Zip-Loc bag in the event of rain. |
Originally Posted by Vintage_Cyclist
(Post 19340328)
My Arkel big bag doesn't rattle at all. I think the key is the adjustment of the handlebar brackets. It they're perfectly centered on the bag slots, there can be a little play, for side to side jiggling. If they're a tad to outside of center, the connection with the bag slots will be tighter, as they bind against the outside edge of the slot to bracket interface. Seems to be working fine so far, with no effect on ease of removing/attaching the bag.
Hmmm... I feel like I have tried just about everything. Maybe I will revisit the issue this weekend and see if I can't stop the rattling. There was another thread within the past 6 mos. where other folks complained of the same thing. One guy even returned his Arkel bag. Did you see that thread per chance? http://www.bikeforums.net/touring/10...+handlebar+bag |
My Ortleib came with a map pocket. It simply snaps off to remove.
|
Originally Posted by robert schlatte
(Post 19340404)
Hmmm... I feel like I have tried just about everything. Maybe I will revisit the issue this weekend and see if I can't stop the rattling. There was another thread within the past 6 mos. where other folks complained of the same thing. One guy even returned his Arkel bag. Did you see that thread per chance?
http://www.bikeforums.net/touring/10...+handlebar+bag I don't know how widespread the problem actually is, although there's obviously some anecdotal evidence it occurs for some people. I've also heard of people complaining about metal zipper pulls rattling on their panniers. Back in the day, I used to get annoyed with the sound of tire savers humming against my tire, if they drooped down onto the tread, so maybe some of this is just related to each person's level of sensitivity to certain things. It wouldn't hurt for Arkel to look at the issue. A minor design change could absolutely preclude this from happening in the first place. |
Originally Posted by Vintage_Cyclist
(Post 19340328)
My Arkel big bag doesn't rattle at all. I think the key is the adjustment of the handlebar brackets. It they're perfectly centered on the bag slots, there can be a little play, for side to side jiggling. If they're a tad to outside of center, the connection with the bag slots will be tighter, as they bind against the outside edge of the slot to bracket interface. Seems to be working fine so far, with no effect on ease of removing/attaching the bag.
|
ditto on the Arkel
|
On drop bars with STI levers and the exposed shifter cable/housing I've seen a lot of riders put their map/crib sheet inside a zip-lock bag and then binder clip it to the cables housing. For a handle bar bag almost any bag can be used and a plastic map holder made from a zip-lock bag and velcroed to the bag top.
Cheers |
| All times are GMT -6. The time now is 09:40 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.