Go Back  Bike Forums > Bike Forums > Touring
Reload this Page >

Shimano Tiagra RD-4400 replacement?

Notices
Touring Have a dream to ride a bike across your state, across the country, or around the world? Self-contained or fully supported? Trade ideas, adventures, and more in our bicycle touring forum.

Shimano Tiagra RD-4400 replacement?

Old 02-18-19, 03:29 PM
  #1  
Junior Member
Thread Starter
 
Join Date: May 2013
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Shimano Tiagra RD-4400 replacement?

Hi Guys
Newbie here. I have a touring bike with a 9 speed Shimano Tiagra long cage rear derailleur which needs to be replaced. I'm messing around with replacing the granny ring to a 22 or 24T and replacing the rear cassette as well to get better low range gearing. So I need something with a good chain wrap capacity. Someone suggested a 9 speed Deore long cage derailleur with a 45T capacity as a possible option. Would this be possible? WOuld a mountain bike derailleur work on my road touring bike? Any other replacement options that you folks could suggest..? Also, I have Shimano Sora Brifters as part of the set up.
thanks
Sanjeev

Last edited by sanjeevv1; 02-18-19 at 03:36 PM. Reason: adding more information
sanjeevv1 is offline  
Old 02-18-19, 04:09 PM
  #2  
Miles to Go
 
timdow's Avatar
 
Join Date: Oct 2011
Location: San Diego
Posts: 711

Bikes: 2022 Juiced Crosscurrent X, 2022 Fuji Touring, 1998 Schwinn Moab (drop bar conversion), 2010 LHT (Stolen)

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 151 Post(s)
Liked 145 Times in 95 Posts
The mountain RD should work fine. With 9-speed the cable pull is the same for road and mountain, so the brifters should work fine. Cassette with bigger cogs (11-32T or 11-34T) would be fine after the RD change.

As for the rings, what do you have now? Do you have 26/36/46 or 48? With this setup if you have a 26T and want to go to 24, that should be fine. What you have to keep in mind here is that shifting may not be good,and you may experience the chain falling off if you go with a difference of more than 12T with the rings on the crankset.
timdow is offline  
Old 02-18-19, 04:56 PM
  #3  
Junior Member
Thread Starter
 
Join Date: May 2013
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Right now I have a 30-42-50 set up in the front. I replaced the 30T granny with a 24T. Added a n-gear stop to address the chain falling off from the 42 to the granny issue - and it seems to help about 80% of the time, but not always - so it needs some tweaking. I'm still kinda playing with it. But thanks for verifying the the Deore will work. I'll check it out.
sanjeevv1 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
amadeus88
Hybrid Bicycles
3
06-16-19 07:36 PM
Jarrett2
Bicycle Mechanics
15
04-06-15 03:13 PM
yellowlebron
Bicycle Mechanics
5
01-31-14 10:40 AM
Bikedued
Bicycle Mechanics
7
03-10-13 06:31 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.