What are some good touring/communting fenders?
#1
Senior Member
Thread Starter
Join Date: Aug 2007
Location: Vashon Island, Wa, US
Posts: 112
Bikes: Trek 520, Novara Safari
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What are some good touring/communting fenders?
So it's beginning to rain and I need some good fenders for commuting (about 200 miles a week) that I will also use on tours. I have a '99 Trek 520 and I've been looking at SKS fenders, Freddy Hardcore touring fenders, and some Bontrager fenders. Since I am really inexperienced,what would be good? What do you guy's personally like? I also don't want to spend more than $100 on them.
Thank you guys,
-Jai
Thank you guys,
-Jai
#3
Senior Member
Join Date: Feb 2001
Location: England
Posts: 12,948
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 19 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
SKS are ideal, they are pretty indestructable and survive a lot of abuse.
The front stay safety release really works.
You can drill them for mounting rear reflectors, (small) front dynamo lamps or zip ties and splash guards.
Some even have a conductive metal strip for routing dynamo power.
The front stay safety release really works.
You can drill them for mounting rear reflectors, (small) front dynamo lamps or zip ties and splash guards.
Some even have a conductive metal strip for routing dynamo power.
#5
Gemutlichkeit
Join Date: Dec 2005
Posts: 2,423
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
My '98 520 came used with PLanet Bike fenders over 28mm tires. But, I don't really endorse any brand of fender because they all seem so lacking in the real world. I'm talking about flaps. If you don't have a good long front flap in front that goes almost to the ground, you and your bike will soon be coated with whatever crap is in the road spray. Brand of fender notwithstanding.
I removed the little toy flairs that they stuck on the things and installed some cut stair tread with a drill and pop riveter. It looks like it belongs there and does a great job of keeping the crud to a minimum. Remember: it's the front that counts for you and the bike, the rear is for your friends, if you care to keep them.
I removed the little toy flairs that they stuck on the things and installed some cut stair tread with a drill and pop riveter. It looks like it belongs there and does a great job of keeping the crud to a minimum. Remember: it's the front that counts for you and the bike, the rear is for your friends, if you care to keep them.
#6
Membership Not Required
Join Date: Jan 2005
Location: On the road-USA
Posts: 16,855
Bikes: Giant Excursion, Raleigh Sports, Raleigh R.S.W. Compact, Motobecane? and about 20 more! OMG
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 70 Post(s)
Likes: 0
Liked 15 Times
in
14 Posts
I have about 4 different brands of fenders on my bikes along with factory installations on a few more. I can recommend the Freddy's or the SKS. I also have some Zefal's but they don't seem as durable. I also second the idea to add/replace the stock mud flaps with something a bit more substantial.
Aaron
Aaron
__________________
Webshots is bailing out, if you find any of my posts with corrupt picture files and want to see them corrected please let me know. :(
ISO: A late 1980's Giant Iguana MTB frameset (or complete bike) 23" Red with yellow graphics.
"Cycling should be a way of life, not a hobby.
RIDE, YOU FOOL, RIDE!"_Nicodemus
"Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred
Which one would you rather have under your butt at 30mph?"_krazygluon
Webshots is bailing out, if you find any of my posts with corrupt picture files and want to see them corrected please let me know. :(
ISO: A late 1980's Giant Iguana MTB frameset (or complete bike) 23" Red with yellow graphics.
"Cycling should be a way of life, not a hobby.
RIDE, YOU FOOL, RIDE!"_Nicodemus
"Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred
Which one would you rather have under your butt at 30mph?"_krazygluon
#7
Senior Member
+1 jcm
My experience is with the planet bike fenders. They do the job and are cheap. Like jcm I riveted a bigger mud flap and also an extra set of struts at the front. I would never spend 100$ for fenders: I guess they all perform the same as long as you don't put them too close to the tire.
Check out those at velo-orange for a classy look.
My experience is with the planet bike fenders. They do the job and are cheap. Like jcm I riveted a bigger mud flap and also an extra set of struts at the front. I would never spend 100$ for fenders: I guess they all perform the same as long as you don't put them too close to the tire.
Check out those at velo-orange for a classy look.
#8
-
All the plastic ones are nearly identical (tough plastic with an aluminum laminate), varying only in mounting hardware. SKS come in several widths to match your range of tires.
If you have a choice, pick the set that includes a front breakaway mount. Its a little plastic bit that snaps in two if you pick up a stick, beverage container or squirrel with the front tire.
Patience and a nashbar.com "sell" will get you a 35 or 60mm fender set for ~12-20 USD.
If you have a choice, pick the set that includes a front breakaway mount. Its a little plastic bit that snaps in two if you pick up a stick, beverage container or squirrel with the front tire.
Patience and a nashbar.com "sell" will get you a 35 or 60mm fender set for ~12-20 USD.
#9
Junior Member
Join Date: Apr 2006
Posts: 16
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Soma Euro Trip Fenders
A relative newcomer into the fender market is SOMA and they make a range of sizes to fit your wheel. They outsource them from the same guys who make fenders for KOGA and other European makers, and they include the break-away mounts for safety. They are reasonably priced but the finish makes them look like they are worth quite a bit more.
Additionally, they have this nifty fork attachment piece that slides in and out to give you up to 2cm of adjustability to dial in the fit. A nice advantage compared to all the other plastic fenders out there.
Visit their site (www.somafab.com) and look for the Eurotrip Fender link in the Accessories menu.
Good luck!
Additionally, they have this nifty fork attachment piece that slides in and out to give you up to 2cm of adjustability to dial in the fit. A nice advantage compared to all the other plastic fenders out there.
Visit their site (www.somafab.com) and look for the Eurotrip Fender link in the Accessories menu.
Good luck!
#10
royal dutch of dukes
Join Date: Sep 2004
Location: brooklyn, nyc
Posts: 400
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 66 Post(s)
Liked 0 Times
in
0 Posts
re: soma fenders
Visit their site (www.somafab.com) and look for the Eurotrip Fender link in the Accessories menu.
#11
Junior Member
Join Date: Apr 2006
Posts: 16
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'm not sure I understand - the SOMA EuroTrip Fenders have two stays per side on both the front and rear fenders (see pic). I believe the Freddy fenders only have one on the front. They have always been sturdy for my riding - half paved surface and half unpaved railroad bed trail (packed dirt and gravel).
Let me know if I misunderstood your reference!
Let me know if I misunderstood your reference!
#12
California über Alles!!
Join Date: Nov 2002
Location: Sacramento, CA
Posts: 139
Bikes: Steve Rex City Bike, Steve Rex Road Bike, Giant Rincon Grocery-Getter, Raleigh Superbe
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Velo Orange is now offering an extra-long version of the Honjo aluminum fenders, in both smooth and hammered finishes. If you are concerned about front-wheel gunge spray, these should fit the bill - add a flap and you are money!
#13
GATC
My '98 520 came used with PLanet Bike fenders over 28mm tires. But, I don't really endorse any brand of fender because they all seem so lacking in the real world. I'm talking about flaps. If you don't have a good long front flap in front that goes almost to the ground, you and your bike will soon be coated with whatever crap is in the road spray. Brand of fender notwithstanding.
#14
Senior Member
Join Date: Feb 2007
Location: The Land of Pleasant Living
Posts: 772
Bikes: Trek 630 • Jamis Quest • Bilenky Tourlite and various others
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I just ordered Berthoud's stainless. I don't dig the way the struts adjust on the laminate fenders (outside radius), thats why I went with the Berthouds. Have I made a mistake? Are they ridiculously heavy? I do know they look good (I'm going to be a bit vain w/the bike they're destined to go on). Anyone have them on their own rig?
#15
Steel is Real.
Join Date: Dec 2003
Location: Lakeside, CA
Posts: 967
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Check out the PB Cascadias! Very useful, functional flap, even though it is not a street-sweeper. They sell the flaps separately but I'm not sure how useful that would be if you need to drill matching holes in your existing fender...
Here's some homemade stuff from Alex Wetmore, being in Seattle, I'm sure he knows a bit about rain.
https://phred.org/~alex/bikes/fendermudflap.html
__________________
Mark Wolfe -- Lakeside, CA
2007 Bacchetta 700c Carbon Aero
2005 Bacchetta Corsa
2004 Surly Long Haul Trucker
1990 Waterford Paramount
Mark Wolfe -- Lakeside, CA
2007 Bacchetta 700c Carbon Aero
2005 Bacchetta Corsa
2004 Surly Long Haul Trucker
1990 Waterford Paramount
#16
GATC
You can make a flap from a milk jug. Yes, you need a low front flap to keep most the crap off.
Here's some homemade stuff from Alex Wetmore, being in Seattle, I'm sure he knows a bit about rain.
https://phred.org/~alex/bikes/fendermudflap.html
Here's some homemade stuff from Alex Wetmore, being in Seattle, I'm sure he knows a bit about rain.
https://phred.org/~alex/bikes/fendermudflap.html
#17
Senior Member
Join Date: Mar 2007
Location: Philadelphia
Posts: 221
Bikes: Surly Pacer, Trek 520 & gaspipe fixed gear beater
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have Honjo aluminum fenders. They nice & long, so I get by fine without a mud flap, but you could attach a flap if you like. They don't rattle at all, unlike the plastic fenders I originally had.
Downside is that they are pricey, but Velo-Orange sells a house brand aluminum fender for half the price if you don't want to splurge on the Honjos.
Downside is that they are pricey, but Velo-Orange sells a house brand aluminum fender for half the price if you don't want to splurge on the Honjos.
#18
royal dutch of dukes
Join Date: Sep 2004
Location: brooklyn, nyc
Posts: 400
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 66 Post(s)
Liked 0 Times
in
0 Posts
Now if I could only find the eurotrip fenders!! the soma site is sold out of them...
re: honjo's and other aluminums: they need to be drilled, which seems like an extra step i dont need...
re: honjo's and other aluminums: they need to be drilled, which seems like an extra step i dont need...
#19
Full Member
I've used Zefal's for the last 10 years. They're permanent, which is fine, but hard to get them adjusted just right. Perhaps all fenders are like that, don't know. I have gone on 3 tours with them, and commute with them.
#20
Senior Member
Join Date: Jan 2006
Location: Vancouver, BC
Posts: 150
Bikes: 2008 Turner Spot, Berg Ti Cross, 2011 Karate Monkey
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
fenders extensions are the key
It's not the fender, so much as what you put on it keep the spray and debris to a minimum. My preference is these extenders, because:
1) The flex out of the way when I roll the bike in hallways on the back tire (don't try that with your long honjo's!)
2) They flex out of the way when I mount the bike on a fork-down roof rack.
3) They don't move too much in the wind and stay put.
4) The hardware doesn't rust and is well thought-out. Nice serated nuts bites into the rubber, and doesn't come loose.
Don't get distracted by the aesthetic-centric tourer/country bikes/rando setups - function over fashion, I say. I don't care if you fenders are made from tortoise shells or mahogany...do the work? For me, the basic plastic full coverage fenders with extenders can't be beat...
1) The flex out of the way when I roll the bike in hallways on the back tire (don't try that with your long honjo's!)
2) They flex out of the way when I mount the bike on a fork-down roof rack.
3) They don't move too much in the wind and stay put.
4) The hardware doesn't rust and is well thought-out. Nice serated nuts bites into the rubber, and doesn't come loose.
Don't get distracted by the aesthetic-centric tourer/country bikes/rando setups - function over fashion, I say. I don't care if you fenders are made from tortoise shells or mahogany...do the work? For me, the basic plastic full coverage fenders with extenders can't be beat...
__________________
Just Riding Along
Just Riding Along