Marine battery boxes.

http://i64.photobucket.com/albums/h1...P1010044-2.jpg

http://i64.photobucket.com/albums/h1...P1010045-1.jpg

more info in the thread about them @ http://www.bikeforums.net/showthread.php?t=350599

Bamboo trailer assembly update:

http://bambootrailer.blogspot.com/

Saw your technique for adding dropouts using the joist angle. I'm working on the same problem for a trailing I am putting together. My plan was to use a 36"inch steel hanger angle I bought at Lowe's and cut the thing into 4 pieces. The angle I bought already has holes in it, but I have to hacksaw the thing into 4 pieces (It's made of steel too...)

http://www.lowes.com/lowes/lkn?actio...286&lpage=none

How do you plan to mount it?

My trailer is a 2by2 frame with a plywood cover. I just have to bolt the angle to the 2by2. Hopefully that will be strong enough. I'll put up photos if it ever warms up enough to work on it.

My BAW 64". Best part is having a hitch mount for transporting BIKES! MORE BIKES!!

http://www.deviantart.com/download/7...y_DJ_Erock.jpg

Here is the one I pull my grandkids in,,,,,I hope to post my Cargo trailer soon too.

Where did you get those wheels?
 

astronomerroyal,
Your trailer looks to handle well, looks exceptionally stable and seems extremely well made and seems hard to fault. It also looks the equal of any professionally manufactured unit.

But where did you get your wheels from?

I too value stability.

You Devil. Those compliments have me all undone. I am ashamed to say that I bought my wheels on Amazon.com, more specifically from an Amazon marketplace seller. I believe the name was Niagara Bicycles. The first time I got some sort of special deal, the second set of wheels however cost me a fair bit (when I made the rear end of Velocipede I felt that I had to be consistent with my hardware.) They don't seem to combine the shipping costs. I also looked on ebay, but came up short.

The building of both trailers really was a labour of love. Already I'm reminiscing. The metal shavings in the carpet. The furtive drilling of holes at 11pm. Wonderful memories.

Thanks for the info about the wheels.
 

astronomerroyal,
Thanks for the info about the wheels.

Have you posted the dimensions of you trailer anywhere, i.e.:
The track width
The load platform width.

If so, could you post a link?

It's just that your trailer is so stable, the load platform can be deduced from the wheel diameter, but the oblique views make it difficult to estimate the widths of the track and load platform.

It would be useful from the point of reference.

Trailer dimensions
 

Sorry, meant to reply sooner. Here are some dimensions of the two trailers.

Front trailer:
bed width 12"
bed length 36"
track width (between centres of tyres) 16"
Max width of trailer 21"
weight 16lbs (incl. hitch)

The rear trailer (as seen in a post on this thread) is slightly wider, in order to accommodate those larger rubbermaid type boxes. Although the first trailer is very stable, as soon as you put something tall on it (centre of mass >1 foot from its bottom), the 16" wheel base becomes noticeably less stable. However, this is of little practical concern, since 2 large bags of birdfood stacked, camping gear, or three weeks of groceries have been no problem to transport.

Rear trailer:
bed width 14"
bed length 36"
track width 18" (the extra 2" really increase stability, since the bed's only 7" off the ground)
max width 23"
weight: 13lbs

In general I set the max width of the trailers to be less than the width of my handlebars (24") to guarantee they'd fit through any gaps that I could get my bicycle through.


Now that Spring's here, I'm thinking of using the trailer on a weekend bnicycle tour/camping trip. If anyone knows of a nice quiet camping area within an easy day's cycle (~<50miles) of Ann Arbor, Michigan, please speak up.

Yours sincerely,
AR.

Thanks for the information!
 

astronomerroyal,
Thanks for the information, especially the additional comment about the increase in stability caused by difference in track width from 16" to 18".

Clearly, it's obvious that a wider track will increase stability, but by how much? Your practical experience is essential to anyone wanting to get it right first time.

Once again,
Many thanks.

Christopher

My trailer:
http://members.shaw.ca/feynn/biking/trailer.jpg

My chosen tow bike:
http://www.ravingbikefiend.com/bikepics/phillips20c.jpg

The Twenty will be getting a dual drive and the trailer will be getting some smaller wheels to keep things level... I should have them mated up this week.

Well, snatched this off of CL for a song, only issue I had was getting it home with the scooter. I'm going to use it for the grocery getter and weekend camping gear hauler.

http://i257.photobucket.com/albums/h...h_S5030352.jpg
http://i257.photobucket.com/albums/h...h_S5030351.jpg
http://i257.photobucket.com/albums/h...h_S5030348.jpg


edit: Thumbnails: click to enlarge. Now to figure out what material to use for the flat bed. I might add some kind of sidewalls or just use a rubber maid container similar to ones I have seen on here.


another edit...
http://i257.photobucket.com/albums/h...030352copy.jpg
Just roughly my goal. The black "web" is an elastic net that allows easy securing of loads.

Unsolicited thoughts:

I also tried using elastic webbing, but in the end I found simple bungee cords to be more useful/versatile. I use a duffel bag for something like touring and a rubbermaid tub for groceries, neither of which warranted an elastic net, sadly - although it is attractive idea. For the most part I use built-in nylon straps with adjustable buckles for strapping purposes. Most useful by far. I think I posted a p[iiicture with these straps somewhere on this thread.

As for the bed material, I found that Makrolon polycarbonate works well (for my sidewalls). I would think 1/4" would be a good thickness for a bed, perhaps more if it's entirely self supporting.
that would be almost indestructible, although I expect some sort of wire mesh would actually be lighter (I use wire mesh for my trailer bed, but it might sag if it doesn't have some support i.e. crossbeams).

Those trailers look really well designed.

Sincerely,
AR.

Well, i just used some plywood our neighbor tossed out some time ago. So far I have $30 in the trailer. Next it will get some weather proof paint, reflective tape, mount the flag and possibly add a small lockable tool box on the front.

http://i257.photobucket.com/albums/h...h_S5030357.jpg
click to enlarge.

EDIT: All done now. Added the tail lights and some reflective tape.
http://i257.photobucket.com/albums/h...h_S5030381.jpg
http://i257.photobucket.com/albums/h...h_S5030379.jpg
http://i257.photobucket.com/albums/h...h_S5030367.jpg

Kept it simple and did a 10 mile grocery run. Can barely tell it is there when going straight, more when riding up a hill but as stable as can be.

That was quick, looks good. What you apparently did in a couple of days took me a couple of months.

You built your trailer, and with the U-joint hitch you have some seriously good maneuverability. And your fenders are a nice addition too. Burley took all the guess work from me. I just slapped some plywood on there, no engineering involved.

did you photoshop the window? And where did you get the triangle? I tried Ace Hardware, Academy, Target and Wal-mart.

You can get them online. Do a google search for SMV sign. SMV = Slow Moving Vehicle

Or you can try a different hardware / farm store. Homedepot, Lowes, etc. They shouldn't be too hard to find.

Here's my trailer: a PB Flyer from http://www.paddleboy.com/

Works great to haul my 12', 20lb. paddleboard down to the ocean behind my Trek beachcruiser.

http://stevelange.net/images/pbflyer.jpg

Steve

This isn't my trailer, but a guy who lives about 12 miles away who lives car-free brought this trailer up this weekend. The pic was taken at my local Bike Co-op's grand opening.

This trailer is claimed to be able to handle 700~ pounds. He brought it up for the Critical Mass ride this friday, and people took turns sitting in the trailer and playing guitar during the ride.

http://img.photobucket.com/albums/v2...h/DSC00299.jpg

http://img.photobucket.com/albums/v2...h/DSC00300.jpg

Presumably that '700~ pounds' is a typo, especially looking at the wheels.

Looks a nice useful trailer. But I wouldn't like to pull anything over ~ 100 lbs / 45 kg with such a trailer. The high hitch would make for interesting handling, when braking and turning, because when loaded-up the trailer attempts to overrun and pushes against the seat post. This effect occurs with all hitches, but is much greater with high hitches.

I know that http://www.bikesatwork.com/hauling-c...-capacity.html
talk of '300 lbs (137 kg)' and even larger payloads, but to haul these loads safely requires more common-sense and muscle than I could summon. Also good brakes and level-ground.


I still haven't built my new trailer yet. I have nearly scrounged all the parts.

My 1st trailer build
 

I've been wanting to build a trailer for some time now and one day I found
these 16" wheels for free. So, no more waiting.

Still doing testing, but seems to be holding up.
Attachment 69106
Picture on how I ended up doing my hitch.
Attachment 69105
And here it is with some paint.
Attachment 69104

That's a great looking trailer/hitch Mudflap - an efficient design. Does that long hitch arm flex very much?

Thanks
If it is flexing, I can't tell. I loaded it with 10gallons of water (83lbs) and it worked great.
I'm still testing.

Trailer and bike in suitcase
 

Here is my simple trailer and the suitcase with my downtube bike and trailer in it.

Just finished my trailer recycling project last evening.
http://www.flickr.com/photos/2720953...n/photostream/
This is a very old first series Burley Kiddie hauler that I purchased at a Flea Market for $20. Removed all the dry-rotted nylon and fabric, replaced hardwear as necessary (lots of extremely rusty bolts). Spent about $10 on stainless bolts and nuts. Busted as much rust as I could from all of the spokes, rebuilt and cleaned the wheels, and replaced a broken hitch. In the end - about $40 in my "new" cargo trailer. I'm loving it.

http://farm4.static.flickr.com/3069/...ea8bdce6_m.jpg

...Bill Milam
Maryville TN